Automatic Z-beam machine is a common cold-formed steel, 1.6-3.0mm thickness is between the cross-sectional height between 120-350mm mostly Processing hot rolled material (paint), galvanizing Processing Standards Press GB50018-2002 execution. Z beam typically used in large-scale steel plant in the. processing length and hole by machining requirements.
Complementary products: steel tile; Yanmian sandwich panels; floor for the board.
Z-beam machine main technical parameters:
Host: 13500mm * 2200mm * 1500mm
Line full length: 17-20m
Rolling range: width 150-300mm, 50-70mm height
Rolling Thickness: 3.5mm or less
Second, the abrasive material roll
1, Cr12 steel quenching hardness: 55 ° -60 °
2, shaft quality: 45 # diameter: ∮80mm
Third, productivity: 8-10m / min
Automatic Z-beam machine is mainly composed of passive discharge rack, put the rack base, screed, forming the host, punching device, forming cutting device, hydraulic station, computer control cabinet composed of several parts.
Products can be used as the main medium-sized industrial civil force structure, such as factories, warehouses, machine garages, hangars, exhibition halls, theaters, stadiums, fairs trellis roof bearing load and wall support.