4 m bending machine

4 m bending machine
 

Product description:

4 m bending machine usage
1, the first power, turn the key switch on the control panel, press the pump start, so you hear the sound of the pump rotation. (At this point the machine does not move )
2, stroke adjustment, bending machine must be taken to adjust the itinerary, be sure to test before the bend. Bending machines downstream mold thickness must ensure that there is a time gap to the bottom. Otherwise, it will mold and machine damage. electric stroke adjustment is also quick adjustment and manual adjustment stomach .
3, bending notch choice, and to select the slot thickness of 8 times the width as bending 4mm sheet metal, you need to select the slot 32 or so .
4. After the block adjustment are generally quick to adjust electric and manual fine-tuning, the same way shears .
5, depress the foot switch start bending, bending machines and shears of different, you can always release, release the foot bending machine will stop, continue down the step .