Hand brush filter SSY type

Hand brush filter SSY type

Product description:

The amount of wear: 0.1 Crashworthiness strength: 0.6-2.5 (MPa) Pipe thickness: 40-500 (mm)
Friction coefficient: 0.1 For fluid: Various petrochemical, pharmaceutical and other industries liquids or gases Custom processing:
Material: carbon steel, stainless steel Pipe diameter: 40-500 (mm) Model: SSY type
Brand: Beijing Jing Chen Operating temperature range: -40 ~ 450 (℃)

Hand brush filter is a semi-automatic cleaning filters, filter using a filter built into the brush and brush holder, brush the dirt on the filter, particles and other impurities removed, and then discharged through the drain valve is its most important feature: cleaning can be In work carried out during the filter without drying does not affect the normal operation of the filter device reasonable structure, timber stress, housing made of high quality carbon steel, but also according to user requirements made of stainless steel; organic brush made of inorganic material (good elasticity, high strength, corrosion resistance and anti-aging properties superior) and stainless steel brush holder composition; stainless steel wedge filter is elaborate network structure exquisite, very easy to brush away debris, filtration, cleaning effect is much better than punching net or woven mesh, easy to wash and brush network damage. When using just gently turn the outside handle to the brush holder.

Technical Parameters Size mm
product number SSY type caliberLH
Housing Material 20# 304 316L DN25160125
Through the filter element 304 316L DN32180145
Bolts and nuts 20# 304 316L DN40195164
Filtration accuracy 10 to 300 mesh DN50215186
Gasket NER PTFE DN80285273
Ambient temperature +450 OC~-30 OC DN100300306
Nominal 0 ~ 10.0MPa 150 ~ 600LB DN150380400
Connection Type Welded flange thread DN200480470
Flange Standard GB HG SH JB ANSI JIS DIN DN250545480
Manufacturing Standards HGJ532-91 GB150-98 DN300605640

Installation and maintenance:
1, hand brush filter can be mounted horizontally or vertically, the installation should pay attention to the direction of the arrow on the housing must be consistent with the direction of flow, and when asked when the flow direction is top-down vertical mounting.
2, when a certain pressure, the need to scrub the filter is rotated.
3, such as the discovery filters and brush damage, to be immediately replaced.

Filter by hand bone structure bristle brush (nylon brush is more than having a high strength and high temperature resistance, corrosion resistance and anti-aging properties) and stainless steel components, the components pass through the filter cover, brush-type device mounted on a stainless steel mesh inside the filter cover a simple exterior handle, just gently turn the handle, namely from the filter brushing slightly coarse contaminants discharged through the outfall, brushing process flow without interruption, without having to shut down and dismantle filter cleaning filter, high-quality carbon steel cylinder shell.

Manual brush filter for a variety of water systems, process piping and industrial circulating water system, especially 24 hours of continuous operation without stopping the machine system to ensure safe and reliable operation of the system is a simple and efficient filters, widely used petroleum, chemical, metallurgy, environmental protection, mining, pharmaceutical, food, paper and other fields.