SQ type automatic cleaning filter

SQ type automatic cleaning filter
 

Product description:

The amount of wear: 0.1 Crashworthiness strength: 0.6-2.5 (MPa) Pipe thickness: 50-600 (mm)
Friction coefficient: 0.1 For fluid: Various petrochemical, pharmaceutical and other industries liquids or gases Custom processing:
Material: carbon steel, stainless steel Pipe diameter: 50-600 (mm) Model: SQ type
Brand: Beijing Jing Chen Operating temperature range: -40 ~ 450 (℃)

Automatic cleaning filters, by the host and electrical control box. Host structure is composed of the filter body, filter, reducer electric sewage valve, drive shaft, differential pressure controllers member. Filter body is a flat Jar body. turbid water tank upper part of the chamber, central water pollution, the lower chamber of the sewage. On the side there are intakes in the side there is the outlet, the lower part has an electric discharge valve side pressure differential controller. filter element flat-woven stainless steel dense grain-shaped filter. ZQX series of automatic cleaning filter is configured to use a nylon brush and shell quality carbon steel cylinder, with a large capacity, long life and cleaning efficiency. This machine uses high-tech pressure controller, the control automatically clean the filter. When the filter inlet pressure reaches the set value, the electric control box sends a signal to rotate the drive motor, the drain valve opens automatically. outfall form a vacuum sewage discharged from the automatic drain valve. When the filter pressure drop back to normal, the motor stops moving forward, the electric discharge valve delay off. Throughout the process, continuous flow of material, to achieve a continuous, automated production

The main purpose:

Automatic stripping system: impurities clog the filter channel, automatic stripping system startup, scrape the filter surface impurities to achieve the purpose of the filter regeneration, while the impurities collected in the lower portion of the filter tank, finally discharged through the discharge port.

Control system: self-cleaning start device is controlled by a timer, when the time is reached, automatic cleaning device will automatically start; self-cleaning device nor by the pressure sensor control; timer control is recommended.

Structure and working principle:

Automatic cleaning filters, a main body and electronic control box. The main structure is composed of the filter body, filter, reducer electric sewage valve, the rotating shaft, differential pressure controllers and other member. Filter body is a flat Jar body. turbid water tank upper part of the cavity, the central cavity for the water, the lower the emission intensity. on the side of the inlet, the outlet side portions have lower unit has an electric discharge valve side pressure differential controller. filter element flat-woven stainless steel dense grain-shaped filters, automatic cleaning filters inside nylon brush, with large capacity, long life and cleaning efficiency. This machine uses high-tech differential pressure controller, control self-cleaning filter When the filter pressure drop reaches the set value, the electric control box sends a signal to rotate the drive motor, the drain valve opens automatically. outfall forming a vacuum state, adsorbed on the particulate filter is rotated magazine nylon brush to remove sewage from automatic drain valve. When the filter pressure drop back to normal, the motor stops running, the electric discharge valve delay off the whole filter, continuous flow of material, to achieve a continuous, automated production.