|The amount of wear: 1 || Crashworthiness strength: 0.6-2.5 (MPa) || Pipe thickness: 3-5 (mm) |
| Friction coefficient: 0.1 || For fluid: Various petrochemical, pharmaceutical and other industries liquids or gases || Custom processing: |
| Material: carbon steel, stainless steel, 304,316 || Pipe diameter: 25-250 (mm) || Model: SJ-ZT |
| Brand: Beijing Jing Chen || Operating temperature range: -40 ~ 450 (℃) |
Mirrors, cup attachment is one of the main industrial pipe fittings, in pipeline in petroleum, chemical, pharmaceutical, food and other industrial production device, the endoscope can be observed at any pipeline liquid, gas, steam medium flow and reactions, from to monitor the production, the role of the production process to avoid the accident tube for drainage or by endoscopic reflux front of the trough, cooling water and other liquids pipeline in order to observe the flow of liquid steel sight glass. - Beijing Jing Chen - stainless steel pipe, as the mirror, through endoscopy, three endoscopy
Small installation size, and the driving torque is small, simple, rapid, and also at the same time has a good flow regulation and closed sealing characteristics, medium and large caliber endoscopy in areas of low pressure in use, it is the dominant form of endoscopy.
Purpose: This view mirror can be used for high temperature, corrosion resistance, easy to poisoning, more dangerous, easily crystallized chemical tower in order to ensure its safety in production.
Structure: The sight glass is mainly composed of the sight glass floor, as the mirror glass, the valve assembly and other components.
First, the car in front mirror industry standards and features
1, car mirrors belong important safety part, it's a mirror, are quite particular shape, so quality and installation of rear-view mirror has a corresponding industry standard, can not be altered. Mirrors have a vision problem, too refers to the mirror to reflect the scope of the present foreign automotive mirrors, chrome mirror has replaced the silver mirror and aluminum mirror.
2, dimming rearview mirror view mirror stainless steel - Beijing Jing Chen - stainless steel pipe endoscopy, through endoscopy, three endoscopy
Dimming rear-view mirror is usually installed in the car, which consists of a special side mirrors and two photodiodes and an electronic controller, electronic controller receives light after the exit before the exit of the optical signal photodiode sent. If the irradiation light irradiation in the car on the inside rearview mirror, if the back light is greater than the front lighting, electronic controller will output a voltage to the conductive layer. The conductive layer voltage electric mirror layer changes color, the higher the voltage, the deeper the color of the layer, this time even then a strong light is irradiated onto the rearview mirror, the dimming interior mirror reflected light to dark is displayed on the driver's eye, not dazzling. mirror electrical layer according to the incident intensity of the reflected light rear light, automatic, continuous changes to prevent glare when the vehicle is reversing, the car rearview mirror glare function is released, and right exterior mirrors automatically irradiated ground stainless steel endoscopy -. Beijing Jing Chen - stainless steel pipe endoscopy, through endoscopy, three Mirrors