|Type (channel position): straight-through || Working pressure: 0.6-2.5 || Material: Stainless steel |
| Flow direction: Bidirectional || Pressure environment: atmospheric || Synonyms: fire dampers |
| Model: HXF-IZ HXF-I || Medium temperature: -40 ~ 450 (℃) || Connection: flange |
| Scope: petroleum, chemical, pharmaceutical, energy and other industries || Brand: Beijing Jing Chen || Uses: Relief |
| Suitable medium: Weak acid medium || Drive: automatic |
Hu suction valve: GFJ suction valve arrester Hu Hu HXF-88 all-weather fire retardant suction valve suction valve Hu Hu to take over the suction valve Introduction
Hu suction valve It is used to balance the pressure in the tank, maintaining a normal state is fixed on top of the tank ventilation, to prevent over-pressure or vacuum tank so the tank sustained damage, can also reduce the volatilization tank liquid.
According to Chinese (petrochemical fire protection design) (GB50160-92) provides: A and B liquid fixed roof tanks, flame arrester should be located and Hu suction valve ', Hu suction valve compact structure, light weight, ventilation volume, leak is small. products are single Hu valve, single suction valve, Hu suction valve, a variety of structural types can be configured with a combination of flame arrester, also needed to be formulated to take over.
Hu suction valve: GFJ suction valve arrester Hu Hu HXF-88 all-weather fire retardant suction valve suction valve Hu Hu to take over the suction valve performance
Hu suction valve: GFJ suction valve arrester Hu Hu HXF-88 all-weather fire retardant suction valve suction valve Hu Hu to take over the suction valve: GFJ Zuhuo Hu suction valve HXF-88 all-weather fire retardant takeover Hu Hu suction valve suction valves are suitable for a variety of petroleum, chemical, pharmaceutical, energy, special materials such as liquid or gas.
• Operating pressure:
A, -295Pa (-30mmH2O) + 355Pa (+ 36mmH2O)
B, -295Pa (-30mmH2O) + 980Pa (+ 100mmH2O)
C, -295Pa (-30mmH2O) + 1750Pa (+ 180mmH2O)
D, -295Pa (-30mmH2O) + 9800Pa (+ 10000mmH2O)
(Operating pressure indicators can also be specified by the user)
• Riot Level: BS5501: IIA, IIB, IIC.
• valve disc, seat material: aluminum, stainless steel, good corrosion resistance.
• Seal material: PTFE good antifreeze properties.
• Ambient temperature: -30 ° C -60 ° C
• Flange standard: HG20594-97 PN1.0 If the customer when required GB, SH, HGJ, JB, ANSI, JIS and other standards or changing pressure levels, please indicate in the contract.
Hu suction valve: GFJ Zuhuo Hu suction valve HXF-88 all-weather fire retardant takeover Hu Hu suction valve suction valve structure
Hu suction valve is an important accessory to protect the safety of the tank, mounted on the tank roof, by the pressure valve and vacuum valve of two parts. Its role, in general, keep the tank tightness, to a certain extent, reduce evaporation loss of oil. And, if necessary, can automatically adjust the balance tank ventilation and external pressure on the tank play a security role.
When the tank and gas tank pressure is greater than the allowable pressure, oil vapor to escape through the pressure valve, vacuum valve is closed at this time; when the tank and gas pressure is less than the degree of vacuum tank allow fresh air into the tank through the vacuum valve, At this time the pressure valve is closed, allowing pressure (or vacuum pressure) by adjusting the weight of the disc to control.