|[Alarm & Fire Fighting System] - [Alarm & Security Systems] - [Other Alarm & Security Systems]|
Mechanical Hu suction valve, suction valve Beijing Hu - Hu suction valve brand manufacturers
Mechanical Hu suction valve, Beijing Hu suction valve Introduction
Mechanical Hu suction valve, Beijing Hu suction valve is used to balance the pressure in the tank, maintaining a normal state. Fixed on top of the tank ventilation, to prevent over-pressure or vacuum tank so the tank sustained damage, can be reduced tank liquid evaporation loss.
According to Chinese (petrochemical fire protection design) (GB50160-92) provides: A and B liquid fixed roof tanks, flame arrester should be located and Hu suction valve ', Hu suction valve compact structure, light weight, ventilation volume, leak is small. products are single Hu valve, single suction valve, Hu suction valve, a variety of structural types can be configured with a combination of flame arrester, also needed to be formulated to take over.
Mechanical Hu suction valve, Beijing Hu suction valve performance
Mechanical Hu suction valve, Beijing Hu suction valves are suitable for all kinds of petroleum, chemical, pharmaceutical, energy, special materials such as liquid or gas.
• Operating pressure:
A, -295Pa (-30mmH2O) + 355Pa (+ 36mmH2O)
B, -295Pa (-30mmH2O) + 980Pa (+ 100mmH2O)
C, -295Pa (-30mmH2O) + 1750Pa (+ 180mmH2O)
D, -295Pa (-30mmH2O) + 9800Pa (+ 10000mmH2O)
(Operating pressure indicators can also be specified by the user)
• Riot Level: BS5501: IIA, IIB, IIC.
• valve disc, seat material: aluminum, stainless steel, good corrosion resistance.
• Seal material: PTFE good antifreeze properties.
• Ambient temperature: -30 ° C -60 ° C
• Flange standard: HG20594-97 PN1.0 If the customer when required GB, SH, HGJ, JB, ANSI, JIS and other standards or changing pressure levels, please indicate in the contract.
Mechanical Hu suction valve, Beijing Hu suction valve structure
Mechanical Hu suction valve, Beijing Hu suction valve is an important accessory to protect the safety of the tank, mounted on the tank roof, by the pressure valve and vacuum valve of two parts. Its role in the general case, holding tank tightness, to a certain extent, reduce evaporation loss of oil. And, if necessary, can automatically adjust the balance tank ventilation and external pressure on the tank play a security role.
When the tank and gas tank pressure is greater than the allowable pressure, oil vapor to escape through the pressure valve, vacuum valve is closed at this time; when the tank and gas pressure is less than the degree of vacuum tank allow fresh air into the tank through the vacuum valve, At this time the pressure valve is closed, allowing pressure (or vacuum pressure) by adjusting the weight of the disc to control.