GYW Pipeline Fire | GZ-1 grid Pipeline Fire | HGS-07 pipeline network type flame arrester

GYW Pipeline Fire | GZ-1 grid Pipeline Fire | HGS-07 pipeline network type flame arrester
 

Product description:

The amount of wear: 1 Crashworthiness strength: 0.6-2.5 (MPa) Pipe thickness: 3-5 (mm)
Friction coefficient: 0.1 For fluid: Various petrochemical, pharmaceutical and other industries liquids or gases Custom processing:
Material: carbon steel, stainless steel, 304 Pipe diameter: 25-300 (mm) Model: GYW GZ-1 HGS-07
Brand: Beijing Jing Chen Operating temperature range: -40 ~ 450 (℃)

GYW Pipeline Fire GZ-1 grid Pipeline Fire HGS-07 pipeline network type flame arrester flame arrester is applied by a narrow pore thermal conductor , Principles of design and manufacturing due to heat loss and extinguished suitable for combustible gas pipelines, such as gasoline, kerosene, light diesel oil, benzene, toluene, crude oil and other oil storage and filling or flare system, gas purification Tonghua system, gas analysis systems, coal gas drainage system, furnace fuel gas pipe-line, can also be used in acetylene, oxygen, nitrogen, natural gas pipeline supplies.

GYW Pipeline Fire GZ-1 grid Pipeline Fire HGS-07 pipeline network type flame arrester equipment materials Materials of construction:

NO.

1

2

3

4

member

Component

case

Body

Fire retardant core member

Cell

Fire retardant box

Housing

Bolt / nut

Bolt / Nut

Material

Material

Stainless Steel

Aluminum Aluminums

Carbon Steel Casting

304

316

316L

304

316

316L

304

316

35CrMo

Note: Connection Standard: HG, GB, ANSI, JIS, DIN and so on.

Standard Connection: HG, GB, ANSI, JIS, DIN, ect.

Operating pressure: 0.6-5.0Mpa (150Lb-600Lb)

Operating Pressure: 0.6-5.0Mpa (150Lb-600Lb)

GYW Pipeline Fire GZ-1 grid Pipeline Fire HGS-07 pipeline network type flame arrester repair and maintenance:
In order to ensure the safety arrester performance to the intended use of the flame arrester should be checked regularly maintained. Zuhuo inspected once every six months to check fire resistant layer core is blocked, deformation, corrosion was found to be blocked fire resistant layer core should be cleaned to ensure that each of the perforations on the core flow, deformation and corrosion for fire resistant layer should be replaced. reinstall fire resistant layer core, it should not be leak tight to ensure the joint surface.