Beijing gas flame arrester | Beijing flame arrester | Tianjin arrester | Hebei arrester

Beijing gas flame arrester | Beijing flame arrester | Tianjin arrester | Hebei arrester

Product description:

The amount of wear: 0.2 Crashworthiness strength: 0.6-2.5 (MPa) Pipe thickness: 2.5-5 (mm)
Friction coefficient: 0.6 For fluid: Various petrochemical, pharmaceutical and other industries liquids Custom processing:
Material: carbon steel, stainless steel Pipe diameter: 25-300 (mm) Model: zhq-b
Brand: Beijing Jing Chen Operating temperature range: -40 ~ 450 (℃)

Beijing arrester gas arrester Beijing, Tianjin, Hebei arrester flame arrester is applied by a narrow pore heat conductor, the principle of heat loss due to the design and manufacture of extinguishing suitable for combustible gas pipelines, such as gasoline, kerosene, light diesel oil, stupid, A stupid, crude oil and other oil storage and filling or flare system, gas purification Tonghua system, gas analysis systems, mine gas drainage system, furnace fuel gas pipe-line, can also be used in acetylene, oxygen, nitrogen, natural gas pipeline supplies. Beijing Jing Chen era Petrochemical Equipment Co., Ltd. (http: // Professional produce (Corrugated pipe type, drawer type, oxygen, hydrogen, methane, gas, a jacket, mesh type) flame arrester.

Pipeline Fire is used to prevent flammable gas, liquid flame spread and cause a safety device to prevent tempering explosive commonly used in what situations:

Flame arrestor is a safety device which shell be used in preventing combustion in pipe Generally FA is installed in pipe for running or vent pipe

(1) the transportation of flammable and combustible gas pipeline; Combustible gas pipe

(2) storage tanks of petroleum and petroleum products; Oilcan With deposited petroleum

(3) the risk of explosion ventilation system nozzle; Vent pipe

(4) oil and gas recovery systems; Oil gas recovery system

(5) to go back to the furnace combustion gas pipeline network; Combustible gas net

(6) engine exhaust systems; Exhaust of internal-combustion engine

(7) The flare system; Torch assembly system

The main technical parameters:

Main technical parameters:

Applies to: Storage flash point below 60 ℃ of petrochemical products, such as gasoline, kerosene, light diesel oil, and toluene.

Shall be set in the roof of vertical tanks which store first-class oils whose flash points are lower than60 ℃. Operating temperature ≤480 ℃

Operating Temperature: ≤480 ℃.

Housing Material: Steel, aluminum, stainless steel: SUS304, SUS304L, SUS316, SUS316L.

Body Material: A3, A1umium, SS: SUS304, SUS304L, SUS316, SUS316L.

Fire retardant core material: Stainless steel corrugated board.

Fire Arresting trim Material: SS corrugated plate.

Explosion levels: BS5501: IIA, IIB, IIC.

Flame arrester grade: BS5501: IIA, IIB, IIC.

Manufacturing, testing standards: According to GB5908-86 standard execution.

Manufacture and test are in accordance with GB5908-86.

Flange Standard: HG20594-97 PN1.0 If the customer when required GB, SH, HGJ, JB, ANSI, JIS and other standards or changing pressure levels, please indicate in the contract.

Flanges or the valve are in accordance with HG20594-97 PN1.0 When GB, SH, HGJ, JB, ANSI, JIS, If changed, buyer shall illustrate in the contract.