HTP-500 microprocessor controlled drain external pressure load testing machine
Concrete and reinforced concrete pipes test device is Nasi Nuo (LASNOV) according to national standards (concrete and reinforced concrete pipes) (GB / T 11836-99), (concrete and reinforced concrete pipes Test Method) (GB / T 16752 -2010) regulations developed using German technology, the use of three compression modes, mainly used in concrete, reinforced concrete pipes outside pressure test.
Second, the main features of
1, the use of electric screw lifting beams, easy to make different diameter drain test (300-2000mm).
2, under the support beam segmented modular, easy to do different length drain test.
3, base using concrete pouring, flush with the ground, easy to drain into a variety of mouth.
4, load using computer control hydraulic loading, saving time and effort, the load stable, rapid reset test space.
5, loading speed is constant, there is the whole microcomputer automatic control, to meet the national standard loading speed and control at every stage dwell time requirements, and control load level can be programmed to specify a customer.
6, the force value KN value is displayed directly, without having to bother force value calculation.
7, software design peak hold function, and automatic data storage, report editing and printing.
8, reports can simultaneously save and print test curve and force values and other information, so that the testing process is really reproduction.
9, beams and piston stroke are set limit protection, ensure the safety of the test process.
10, high rigidity chassis design reduces interference factors on the test results.
11, a control cabinet with casters movable, easy to operate test test personnel from different parts of the observed cracks.
12, data, report processing capabilities, provides users with a special report editing tools for graphic layout, flexible operation, easy to learn features, can easily print test curve and test values;
13, the software has a force value is automatically cleared system, eliminating human error varies other factors cleared
14, area, height, temperature and other parameters of each group of tests may change or fill in the actual situation.
15, two sets of system control, ie manual control system and computer control system easy to replace, to ensure that when a computer virus, can not boot and other objective factors, the work will not be affected.
16, test speed, pressure points, dwell time can be written in the programming by the microcomputer automatic control operation.
17, pressure points can be set to any number of points, each stage arbitrarily set speed, dwell time can be set at a preset condition automatically switches to the next stage.
Third, the main technical parameters:
1, maximum pressure: 500KN
2, column spacing: 2000mm (to be completed by the three levels of pipe pressure test 100-2000mm)
3, test space: 2000 * 2100mm
4, beam adjustment: electric screw (electric control button, freely adjustable)
5, beam adjustment range: 300mm ~ 2100mm
6, crosshead speed: 100mm / min
7, force value accuracy: (± 1% better than the indicated value) 1
8, the test force display: computer control, real-time display of the current dwell time, speed, force values, and other parameters.
9, the measuring system for the microcomputer automatic control system, with dual display function, load speed, power value of the digital display, with automatic storage, you can always check, report printing, preservation and other functions during the test. Comes with HP color printer, You can print the test report.
10, fracture load automatically identifies and records, failure load automatically recorded.
11, reached the national standard percentage is calculated automatically and issue data.
12, with overload protection force value that is 2% over full scale automatic shutdown power-off function.
13, piston stroke: 0-500mm
14, the support beam: 2000mm
15, hardwood support length: 1000 + 1000 = 2000mm
16 Hardwood support spacing: adjustable (turntable, easy to adjust)
17 Hardwood support fillet: R = 12.5mm
18, loading: electro-hydraulic.
19, controlled carrier mode: automatic computer control system.
20, power supply: 380V ± 10%, 220V ± 10%, 50HZ
21, Weight: 4000Kg
22, Dimensions: 5000x4000x3000mm
23, because of the huge equipment required on-site ahead of the foundation, on-site installation, the paint. (Require users to install, lifting).
24, with the Lenovo brand computers, LCD monitors, HP color printer.