Microcomputer control gas spring performance testing machine
The series is based on gas spring testing machine test specification GB QC / T207-1996 and JB / T8064.1 ~ 8064.2-96 predetermined design and manufacture of special test equipment can be automatically complete the entire cycle gas spring test environment can also be individually Determination of gas springs a parameter, and automatically print out the test results.
Applicable to the gas spring tension, pressure, displacement, curves and other tests and analysis.
1, by deforming force value
2, through a highly load value
3, by measuring deformation force value
4, measuring the height by the force value
5, it is possible to spring sorting elect a qualified spring
6, win98 platform: man-machine dialogue
7, test data and test results screen displays the force-displacement curve.
8, curve traversal: You can view the power point by point values and deformation data test curves.
9, an enlarged section of the curve can be optionally amplified and analyzed.
10, print content: specimen parameters, test data, curves, inspection reports, etc.
1, style: door four-pillar structure
2, the maximum test force: 10KN, 20KN, 50KN, 10KN
3, the test force tranches: * 1, * 2, * 5, * 10, a fourth gear
4, the minimum readings: 1N
5, the test force accuracy; ± 1%
6, the displacement resolution: 0.01mm
7, the displacement measurement accuracy: ± 1%
8, tensile stroke: 700mm
9, compression stroke: 700mm
10. Test itinerary: 700mm
11, the speed control range: 1mm / min ~ 300mm / min
12, speed control accuracy: ± 1%;
13, the test machine level: 1
14, deformation indication error: ≤ ± (50 + 0.15L)
16, the protection function: mechanical, double protection program
17, power supply: 220V, 50Hz
19. Noise: ≤50 dB (A)