1, Ultra slim with 14mm thickness Aluminum body.
Conference / Meeting rooms
Factories & Offices
Residential / Institution Buildings Schools, Colleges & Universities Hospitals
Places where energy saving and high color rendering index lighting
Energy savd up to 50% high intensity
5-years life span
Wide range of input voltage: AC85-265V
Special different view angles mixing lighting design
Instant start, no flickering, no humming
New inner high efficiency ( 95%) constant current driver, with heat protection system, can work under unstable voltage
Special circuit design, each group of LEDs work separately, avoiding any problem of
lighting output caused of influenced by single faulty LED
No electric wave, conforming to CE
Green environmental protection, lead-free material, conforming to RoHS
No RF interference
This product should be installed by trained electricians
Check integrality of the products when unpack the packing
The distance between the light and any flammable materials must not be
lessthan0.2m. The distance between the upper part of the installed light and
the ceiling must not be less than 2cm. The light must not be installed into ceilings or walls
that contain heat-insulating material.
The main cable must not connect with the low voltage cable or the surface- mounted
Guide the lights'connecting cables through the drilled-out hole, and fix the
surface-mounted lights with the pre-fitted clips. Make sure that these are securely
connected to the base material.
Safety Notice for Using
Please always use the light out of its package.
Before starting use of the light, please DO not install oruse it.
Any maintenance should be performed by trained professionals only.
Keep packaging material away from the reach of childran and pets. Risk of
Caution. The packaging contains small parts that may be swall owed by children
Never leave children unattended in the vicinity of the lights and do not allow them to
play with electrical devices.
Try to avoid looking directly in the LED beam-especially for extended periods of time.
Do not shine the LED light in another person's eyes.
Never cover the lights by other objects.
Never allow the light to come into contact with open flames of external heat sources.
The products need to re-repair inspection or special treatment of retirement after
prior to cleaning the light, make sure it has been disconnected form the power supply
Use a dry of slightly moistened cloth for cleaning
Never use any chemicals of abrasives for cleaning
Used electronic devices must be collected for recycling and cannot be deposited
together with daily garbage