HD Series Intelligent dimming sodium system

HD Series Intelligent dimming sodium system
 

Product description:

product manual:
A, HD Series Intelligent dimming system integrated sodium
HD Series Intelligent dimming system consists of one-sodium microcomputer CPU processing system (including CPU controls the main unit, the clock ticks, energy-saving drive unit), HD-1 energy-saving control box (control), ballast inductors, triggers, and one Formula sodium and external communication tools.
Second, the product works

Products Schematic
HD Series Intelligent dimming system is based on one-sodium microcomputer to control the core of intelligent products, lighting time calculated by the built-in software, at nightfall, when pedestrians more time using the full power t1 work to ensure road traffic, pedestrian safety lighting ; when you arrive late at night, the road pedestrians, less traffic, ensuring road traffic safety at the same time, the use of lower power operation time t2, the energy savings while ensuring road illumination uniformity and light product safety.

Pattern 2 HD-1 sodium system power schematic
The company's HD-1 timing controller has four DIP switches 1 and 2 in which the control from the lighting to the start of the dimming time t13 and 4 control from the beginning to return to full power saving state time t2, the DIP switch 12 and 34 respectively control (4/5/6/7 hours), available to the user preset, see Figure 1 and Figure 2 at the factory, setting stalls are four hours, before installing the required adjustment to the respective state.
Third, the technical advantages
1, the saving rate of about 40 to 50% (depending on the user grid quality and use environmental determinism);
2, sodium lamp with integrated antenna type liner structure, before and after the dimming light or life, long life of 32,000 hours;
3, can be set dimming time t1 according to local, seasonal and different road to the actual situation, t2;
4, timer control distance, can be installed in the bottom of the pole, convenient, seasonally adjusted, to facilitate engineering construction;
5, the corresponding circuit compensation to improve the efficiency of electricity corresponding;
6, the timing mode uses 'fuzzy' circuit design, specifically an increase inaccuracy timing to avoid timing means the entire road at a time while dimming lead to dump the entire road illumination brought traffic hazard.
four, HD Series Intelligent dimming one-sodium System Specifications
HD Series Product Specifications
Suitable power source
Input voltage
HD400 / 250W system
Integrated antenna structure Sodium 400W
220V / 50Hz
HD250 / 150W system
Integrated antenna structure sodium 250W
220V / 50Hz
HD150 / 100W system
Integrated antenna structure Sodium 150W
220V / 50Hz
HD100 / 80W system
Integrated antenna structure Sodium 100W
220V / 50Hz
Fifth, the energy-saving program
1 ,use HD250 / 150W Intelligent dimming integrated system to replace conventional sodium 400W HPS
1) Design
Use HD250 / 150W intelligent dimming integrated system to replace conventional 400W sodium high pressure sodium lamp, street lights according to 18 points every night, 6:00 in the morning lights, for example, a total of 12 hours lighting, HD series of high-pressure sodium lamp dimming system designed for the whole five hours power lighting and dimming down after seven hours power lighting; when calculating the loss ballast counted together, consider electricity according to 0.80 yuan per kilowatt.
2) use HD250 / 150W Replace conventional 400W Compare energy efficiency
Parameter comparison
Conventional single 400W high pressure sodium lamp
Single set of HD250 / 150 high pressure sodium lamp dimming system
Power source: W
400
250/150
Ballast Power: W
30
30/25
System Power: W
430
280/175
Lighting time / day: h
12h
5h of 280W / 7h to 175W
Daily consumption: degree
0.43*12=5.16
0.28*5+0.175*7=2.625
Annual consumption: degree
5.16*30*12=1857.6
2.625*30*12=945
Annual saving: degree
1857.6-945=912.6
Relative transformation after transformation before saving rate
912.6/1857.6=49.13%
Save standard coal (per kWh press 0.4Kg conversion)
912.6*0.4=365.04
Electricity according to 0.80 yuan / kWh
1857.6*0.80=1486.08
945*0.80=756
Annual electricity savings: Yuan
1486.08-756=730.08
3) Compare energy efficiency before and after reconstruction
Before the transformation: Single 400W high pressure sodium lamp is 1486.08 yuan per year of electricity.
After the transformation: Using a single set of HD250 / 150W dimming system, electricity is 756 yuan per year, than the previous 730 yuan per year to save electricity transformation; converted into standard coal, annual savings 365.04Kg.
2 ,use HD150 / 100W Intelligent dimming integrated system to replace conventional sodium 250W HPS
1) Rehabilitation programs
Use HD150 / 100W intelligent dimming integrated system to replace conventional 250W sodium high pressure sodium lamp, design principles above.
2) use HD150 / 100W Replace conventional 250W Compare energy efficiency
Parameter comparison
Single conventional 250W HPS
A single set of HD150 / 100 high pressure sodium lamp dimming system
Power source: W
250
150/100
Ballast Power: W
30
30/25
System Power: W
280
180/125
Lighting time / day: h
12
5h of 180W / 7h to 125W
Daily consumption: degree
0.28*12=3.36
0.18*5+0.125*7=1.775
Annual consumption: degree
3.36*30*12=1209.6
1.775*30*12=639
Annual saving: degree
1209.6-639=570.6
Relative transformation after transformation before saving rate
570.6/1209.6=47.17%
Save standard coal (per kWh press 0.4Kg conversion)
570.6*0.4=228.28
Electricity according to 0.80 yuan / kWh
1209.6*0.80=967.68
639*0.8=511.2
Annual electricity savings: Yuan
967.68-511.2=456.48
3) Compare energy efficiency before and after reconstruction
Before the transformation: Single 400W high pressure sodium lamp is 967.68 yuan per year of electricity.
After the transformation: Using a single set of HD250 / 150W dimming system, electricity was 511.2 yuan per year, the annual electricity savings than before the transformation of 456.68 yuan; converted into standard coal, annual savings 228.28Kg.
3 ,use HD100 / 80W Intelligent dimming integrated system to replace conventional sodium 150W HPS
1) Rehabilitation programs
Use HD100 / 80W Smart Dimming integrated system to replace conventional 150W sodium high-pressure sodium, design principles above.
2) use HD100 / 80W Replace conventional 150W Compare energy efficiency
Parameter comparison
Conventional single 150W high pressure sodium lamp
Single set HD100 / 80 high pressure sodium lamp dimming system
Power source: W
150
100/80
Ballast Power: W
30
25/20
System Power: W
180
125/100
Lighting time / day: h
12
5h of 125W / 7h to 100W
Daily consumption: degree
0.18*12=2.16
0.125*5+0.10*5=1.325
Annual consumption: degree
2.16*30*12=777.6
1.35*30*12=477
Annual saving: degree
777.6-477=300.6
Relative transformation after transformation before saving rate
300.6/777.6=38.66%
Save standard coal (per kWh press 0.4Kg conversion)
300.6*0.4=120.24
Electricity according to 0.80 yuan / kWh
777.6*0.80=622.08
477*0.80=381.6
Annual electricity savings: Yuan
622.08-381.6=240.48
3) Compare energy efficiency before and after reconstruction
Before the transformation: Single 400W high pressure sodium lamp is 622.08 yuan per year of electricity.
After the transformation: Using a single set of HD250 / 150W dimming system, electricity was 381.6 yuan per year, the annual electricity savings than before the transformation of 240.48 yuan; converted into standard coal, annual savings 120.24Kg.
Sixth, project engineering way
1, HD Series Intelligent dimming systems installed in one-sodium parties determine the transformation of the installation location, no alteration of the original electrical cabinet systems.
2, HD Series Intelligent dimming one-sodium systems installed in two modes, one is in accordance with the lamp cavity, within one according to lampposts, determined based on the specific circumstances.
3, HD Series Intelligent dimming integrated system to follow the original path sodium laying cable lines, without re-laying of buried cables, poles and lamps only connection mode adjusted accordingly, and updated.
4, energy-saving rate of acceptance
Saving rate of acceptance tests, using Power Meter installed directly into the line side of the original high-pressure sodium and alternative products, more run in the same cycle, saving rate of the two modes, the saving rate in accordance with the following formula:
Saving rate = - front (before W transformation after transformation W) / W transformation * 100%
Before the transformation of the former W ---- transformation, product specifications and other relevant period running kWh
After the transformation W ---- After transformation, the corresponding product specifications and other cycle run kWh
Seven business cooperation mode
The companies in the transformation of urban roads in energy services, complete implementation of the 'energy contract management' mode of operation, through this mode provides integrated energy services and complete energy-saving solutions for the user. Users can energy-saving projects and I signed energy-saving cooperation agreement, according to market operations to promote the implementation of energy conservation projects.
According to the actual amount of road reconstruction street, calculate electricity savings before and after reconstruction, according to the contract in the form of annual payments the company investment costs, the customer is completely zero input, after the contract expires, customers enjoy all of the energy efficiency alone.