[Measuring Instrument] - [Weighing & Measuring Apparatus] - [Other Weighing & Measuring Apparatus]

Supply of inorganic chemical products, bulk density meter, bulk density measuring device carbonate

Supply of inorganic chemical products, bulk density meter, bulk density measuring device carbonate
  • Supply of inorganic chemical products, bulk density meter, bulk density measuring device carbonate
Product code: 20982000001
Unit price: 1 CNY  (0.15 USD)
Price unit: Per piece
Minimum order:
Other info:
Visit my shop
Brand: Ricoeur Instrument Model: 103a
Detailed description:

The company operating the bulk density of inorganic chemical products tester, carbonated, quality assurance, welcome to consult the discussion.

Magnesia The bulk density tester

FT-103A Activated clay bulk density tester GBT 23771 bulk density meter, bulk density inorganic chemical products tester

GB 25571 Bulk density meter , HGT2764 Determination of bulk density instrument / Bulk density measuring device carbonate

FT-103A Activated clay Determination of bulk density Equipment Is based on national standards GB / T 25571-2010 national food safety standards, food additive provisions of activated clay design, production. The device is suitable for the determination of food additives, activated clay bulk density, while also meet HGT2764-2008 peroxide sodium carbonate industry industry standards for bulk density measuring device requirements and conform GB210.2-2004. also meet GBT 23771-2009 inorganic chemical products Determination of bulk density .HG / T2573-2006 industrial light magnesia (HG / T2573-2006 instead of HG / T2573-1994) Determination of bulk density requirements

FT-103A Activated clay bulk density measuring device Principle: Dust from the funnel mouth full of free fall at a certain height measuring cup; mass per unit volume within the next measuring cup bulk state, that is the bulk density of the sample to be tested is loaded funnel natural port along the funnel and into the fall. the measuring cylinder, will fall to the sample Calibrating measuring cylinder in the balance that measure the quality of the sample tube after taking evenness, and then divided by the volume of the measuring cylinder, we can measure the bulk density of the products being tested.

FT-103A Activated clay bulk density measuring device Structure: 2.1: funnel flow outlet diameter 30mm; funnel height: 135mm, funnel made of stainless steel, 2.2: cylinder diameter: 80mm, volume: 500ml

Ricoeur Albert Instrument: analytical instruments is a professional research and development, production, sales and after-sales service for the integration of the Industrial Company, the company's current business scope mainly involves chemical, petroleum, molecular materials, powder metallurgy, powder powder, pharmaceuticals. , batteries, plastics, construction materials, wire (Harness) processing, and other related industries.

Measurement methods

1. Preparation of sample: The sample to be tested is placed in an oven at 1100 C and dried at a temperature of 1 hour, cooled to room temperature before measurement.

2. Use a 250mL beaker filled with test sample. Close the hopper discharge port and export center measuring cylinder is placed. The sample is poured into the funnel, open the discharge valve of the funnel abrasive free fall until all the stream After this process should avoid vibration.

3. has been measuring ruler scrape excess specimen tube, when scraper ruler and measuring about 45 barrels catchy plane0 Angle, perpendicular scratch four times. This process should prevent compaction measuring cylinder in the sample, to avoid vibrations. Then measure the quality of the bucket weighing samples.

4. Bulk density is calculated as follows:

P ap = m1/V

Where: P ap ------- Bulk density of the sample to be tested, unit: g / cm3;

m1 -------- Measuring quality drum samples, unit: g;

Volume V --------- measuring cylinder, unit: cm3.

5. A sample measurement should be repeated three times, the arithmetic average of the three measurements as a result of the test sample bulk density values.

6. The results of the operation were measured using the same instrument repeat the same, the error should not exceed ± 0.02g / cm3.

FT-103 Natural Accumulation bulk density meter , Dust accumulation densitometer

FT-103 Natural bulk density meter stacking performance standards

It is based on national standards GB / T 16913.3-1997 provisions of design and production. The device is suitable for the determination of bulk density of dust.

Ricoeur instrument company also produces the following series : Powder flowability tester / Bulk Density Tester / Hall flow meter / tap density tester / Scott capacity meter bulk density tester / bulk density meter / aluminum powder Bulk Density Tester / angle of repose Tester / angle of repose tester / apparent density analyzer / tap density tester / aluminum fluoride (Alumina) Mobility analyzer

FT-103 Natural Accumulation bulk density meter Please refer to the sample collection GB / T 16913.1-1997 dust Physics Experiment Part 1: Dust samples collected in the relevant regulations.