Analyzer, an apparent density of the slurry measuring device, apparent density, apparent densitometer

Analyzer, an apparent density of the slurry measuring device, apparent density, apparent densitometer
 

Product description:

Brand: RICO Ricoeur Instrument Model: FT-105
  • Types of: other
Detailed description:
Repeatability error: 1 Samples can be measured state: the analyzer, the apparent density of the slurry measuring device, apparent density, apparent densitometer
Custom processing: Measuring range: analyzer, an apparent density of the slurry measuring device, apparent density, apparent densitometer
Type: Density Tester Scope: analyzer, apparent slurry density measuring device, apparent density, apparent densitometer
Dimensions: 1 (mm)

FT-105A active agents apparent density measuring device

FT-105A active agents apparent density measuring device Scope: for free-flowing powder or granular surfactant materials, can also be used to have a lump of surfactants, but these clumps should be easy to loose and particulate materials without being broken.

Comply with the standard: GB / T6373-2007 surfactant apparent density.

FT-105A active agents apparent density measuring device Technical Parameters:

1, Funnel: it uses free-flowing powder under a pore diameter of 40mm funnel; when a lump of powder should be used for the next funnel aperture: 60mm funnel.

2. Receiver: cylinder volume: 500mL

3, the bracket: a stationary funnel; backplane pin cylinder positioned only

4, the cutoff plate: 110 * 70mm; 5, ruler: 150mm; 6, stainless steel pipe

7, Material: stainless steel 8 Dimensions 250 * 250 * 320mm

FT-105B slurry was apparent density measuring device

FT-105B slurry was apparent density measuring device Comply with the standard: Determination method GB / T6373-2007 Determination of apparent density, paste, paste or similar state surfactant product filling the apparent density, product specific parameters in accordance with standard production.

FT-105B slurry was apparent density measuring device

FT-105 Apparent density analyzer

FT-105 Apparent density analyzer The instrument is mainly used to set aside provisions funnel Determination of apparent density of plastic bulk material, measured apparent density for PVC resin

FT-105 Apparent density analyzer The chemical industry as well as plastic profile factory quality inspection of raw materials into the plant ideal testing equipment. Products meet GB / T3402 , GB / T1636 And other standards.
FT-105 Apparent density analyzer technical parameters:

The main components: base, cage, funnel, flapper, by the feeder
Feeder by volume: 100m 0.5ml
Sample volume: 110ml-120ml
Funnel angle: 40 Degree, a pore size of 8mm

To meet K-6721 (1966) of the requirements

The instrument is mainly used for determination of apparent density plastic outflow of bulk material from a predetermined funnel, is the chemical industry as well as plastic profile factory quality testing of raw materials into the plant ideal testing equipment. Products comply with GB / T3402, GB / T1636 GB / T20022 -2005 GB / T13173-2008 and 1636-79 standards.
Apparent density analyzer

This method is suitable for measuring the apparent density of the powder molding compound, the mass per unit volume for molding plastic packaging, mold cavity and extrusion screw design provides parameters in line with GB / T 3402, GB 1636 standards.

Apparent density analyzer

1, Sample: extracting a sample standard product requirements.

2, the test instrument:

(1) balance: a sense of the amount of 0.1 g

(2) surface view tester

(3) The cylinder-type cup: 100 ml

Note: Specific parameters, please keep in touch with us, as well as related products.

Configuration: ruler; brush, base, cage, funnel, flapper, by the feeder, manual, certificate, warranty card and so on.

Ricoeur Instruments powder powder test can also provide relevant solutions













FT-105C ASTMD1895 plastic apparent densitometer

FT-105C ASTM plastic apparent densitometer ASTM D1895 Apparent Density Tester

Standard: according to ASTM D1895 03Standard Test Methods forApparent Density, Bulk Factor, and Pourability of PlasticMaterials1; Apparatus for Apparent Density Test, Method A and B production.

FT-105C ASTMD1895 plastic apparent densitometer technical parameters

Technical parameters: a, A-type funnel requirements: Apparatus for Apparent Density Test, Method A

Two, B-type funnel requirements 1 cup height 24 ± 0.1cm; 2, height 3.8cm funnel and measuring cup; 3, exit funnel 2.54cm ± 0.16cm; 4, the funnel opening 12.7 ± 1.0cm; 5, the volume of the measuring cup 400ml ± 2.0ml ; 6, angle: 24 degrees; 6, material: stainless steel; 7, Configuration attachments: Stopwatch 1; brush 1; ruler 15cm1 the manual; warranty card; certificate.

Ricoeur instrument tips: You may be interested in the following products:

Common powder Powder test equipment solutions

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass; FT-103 bulk density tester; FT-103A activated clay bulk density measuring device;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; FT-105 Apparent Density Tester; FT-105A active agents apparent density measuring device; FT-105B The slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester