[Measuring Instrument] - [Weighing & Measuring Apparatus] - [Other Weighing & Measuring Apparatus]

Supply of aluminum fluoride analyzer angle of repose | aluminum fluoride mobility analyzer | angle of repose | oximeter

Supply of aluminum fluoride analyzer angle of repose | aluminum fluoride mobility analyzer | angle of repose | oximeter
  • Supply of aluminum fluoride analyzer angle of repose | aluminum fluoride mobility analyzer | angle of repose | oximeter
Product code: 20977700001
Unit price: 2700 CNY  (393.08 USD)
Price unit: Per piece
Minimum order:
Other info:
Visit my shop
Brand: Ricoeur Instrument Model: FT-104A
  • Types of: Density Tester
Detailed description:
Custom processing: Type: Density Tester
Measuring range: the angle of repose of aluminum fluoride, aluminum fluoride mobility analyzer analyzer angle of repose tester Samples can be measured state: aluminum fluoride analyzer angle of repose of aluminum fluoride mobility analyzer analyzer angle of repose
Repeatability error: 1 Dimensions: 1 (mm)
Scope: the angle of repose of aluminum fluoride, aluminum fluoride mobility analyzer analyzer angle of repose tester Specifications: aluminum fluoride fluoride analyzer angle of repose
Uses: aluminum fluoride analyzer angle of repose of aluminum fluoride mobility analyzer angle of repose Weight: 1
Custom processing: Type: Density Tester
Measuring range: the angle of repose of aluminum fluoride, aluminum fluoride mobility analyzer analyzer angle of repose tester Samples can be measured state: aluminum fluoride analyzer angle of repose of aluminum fluoride mobility analyzer analyzer angle of repose
Repeatability error: 1 Dimensions: 1 (mm)
Scope: the angle of repose of aluminum fluoride, aluminum fluoride mobility analyzer analyzer angle of repose tester Specifications: aluminum fluoride fluoride analyzer angle of repose
Uses: aluminum fluoride analyzer angle of repose of aluminum fluoride mobility analyzer angle of repose Weight: 1

Angle of repose of aluminum fluoride, aluminum fluoride mobility analyzer analyzer angle of repose tester

FT-104 alumina bulk density tester

First, based on (measured alumina chemical analysis methods and determination of physical performance bulk density) in line with GB / T 6609.25-2004 technical specifications. Determination of alumina chemical analysis methods and determination of physical performance bulk density Part 25, the second . FT-104 alumina bulk density tester Technical Parameters:

1. Funnel: mouth diameter 100mm, taper 60º, within the discharge port by 6mm.

2. cylinder: about 200ml, the inner diameter of the inner high ratio of 1: 6, the base outer diameter of 70mm

3; Material: Stainless steel

FT-104A repose angle measurement

(Alumina chemical analysis methods and determination of physical performance: Determination of repose angle) in accordance with national standards GB / T6609.24-2004 designed and manufactured for measuring the angle of repose of the powder under natural flow conditions meet GBT 16913-2008 dust physics. Test methods and GB / T 18702-2002 coal repose angle measurement method

Stainless steel funnel: The inner diameter of 74mm, 6mm inside diameter of the feed opening

Weight: about 16kg

FT-104B angle of repose tester / no lumps powder repose angle measuring instrument / angle of repose of granular surfactant / detergent angle of repose tester / surfactant repose angle / angle of repose tester powder / particle analyzer angle of repose / GB11986 angle of repose tester

FT-104B angle of repose tester

FT-104B repose angle measurement is based on GB11986-89 (surfactant powders and granules measuring the angle of repose) provides the design. The instrument is suitable for the angle of repose no clumps of powdered or granular surfactant and detergent The conventional assays can also be used measuring the angle of repose of a similar nature and other powder particles.
Disc: diameter 10MM
Funnel: diameter 155mm inner diameter of 145mm

FT-104C aluminum fluoride mobility analyzer

YS / T 581.17-2010 Methods for chemical analysis of aluminum fluoride and determination of physical performance - Part 17: Determination of flow

This standard specifies the method for measuring the flow of aluminum fluoride, that a certain quality of aluminum fluoride through a special funnel, funnel flow time measurement sample all needed.

Funnel: stainless steel outer diameter of the funnel catchy 138.5mm, an inner diameter of 123mm, outlet diameter is 3.95mm ~ 4.0mm, the total height of 190.5mm wear resistant stainless steel catchy taper:. 60 °, the feed opening taper 15 °.

Aluminum fluoride bulk density measuring device

Bulk density measuring device , Including the following sections:

1, Funnel: upper inlet diameter 100mm, taper 60 °, neck length 8mm, brought in under the spout inside by 6mm.

2, cylindrical containers: volume of about 200mL, Nei Jing and about 1 in the high ratio: 6, the inner bottom is flat.

3, the annular funnel rack: There are pillars in the bottom stage of sturdy funnel annular mounting frame, long screws fixed to the pillars of the ring frame, and can be freely adjusted.

The funnel installed in the cylindrical container above the predetermined level surface.

Angle of repose of aluminum fluoride measurement device

Angle of repose measuring device Mainly includes the following components:

1, stainless steel funnel: Neijing 74mm, inside through between the feed opening 6mm, two steps of aperture plate fitted with a sieve of 1mm This funnel is fastened to the bracket.

2, galvanized steel plate: material made of steel or marble, stainless steel and other corrosion-resistant base plate is made, the minimum size of: Width 200mm, length 270mm, 18mm thick plating on the polished floor of the four cross engraved on the surface 45. Angle straight. right in the center section of the funnel has a fixed height gauge positioning pin, the bottom plate below 3 adjustable horizontal feet.

3, Funnel Holder: composed of stainless steel, its structure should be perpendicular to the centerline of the fastening funnel centering pin.

4, height gauge (determine the height of the metal cylinder): It is a cylinder surface finish made of stainless steel, high 40mm, the bottom has a recess so that the center of the bottom plate with the locating pin convergence.

The company also produces sells the following related products :

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment
FT-104 alumina bulk density tester; FT-104A alumina repose angle measurement
FT-104B repose angle measurement; FT-105 Apparent density analyzer
FT-105A active agents apparent density measuring device; FT-105B slurry was apparent density measuring device
FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester FT-102A vibration funnel bulk density tester

Angle of repose of aluminum fluoride, aluminum fluoride mobility analyzer analyzer angle of repose tester

FT-104 alumina bulk density tester

First, based on (measured alumina chemical analysis methods and determination of physical performance bulk density) in line with GB / T 6609.25-2004 technical specifications. Determination of alumina chemical analysis methods and determination of physical performance bulk density Part 25, the second . FT-104 alumina bulk density tester Technical Parameters:

1. Funnel: mouth diameter 100mm, taper 60º, within the discharge port by 6mm.

2. cylinder: about 200ml, the inner diameter of the inner high ratio of 1: 6, the base outer diameter of 70mm

3; Material: Stainless steel

FT-104A repose angle measurement

(Alumina chemical analysis methods and determination of physical performance: Determination of repose angle) in accordance with national standards GB / T6609.24-2004 designed and manufactured for measuring the angle of repose of the powder under natural flow conditions meet GBT 16913-2008 dust physics. Test methods and GB / T 18702-2002 coal repose angle measurement method

Stainless steel funnel: The inner diameter of 74mm, 6mm inside diameter of the feed opening

Weight: about 16kg

FT-104B angle of repose tester / no lumps powder repose angle measuring instrument / angle of repose of granular surfactant / detergent angle of repose tester / surfactant repose angle / angle of repose tester powder / particle analyzer angle of repose / GB11986 angle of repose tester

FT-104B angle of repose tester

FT-104B repose angle measurement is based on GB11986-89 (surfactant powders and granules measuring the angle of repose) provides the design. The instrument is suitable for the angle of repose no clumps of powdered or granular surfactant and detergent The conventional assays can also be used measuring the angle of repose of a similar nature and other powder particles.
Disc: diameter 10MM
Funnel: diameter 155mm inner diameter of 145mm

FT-104C aluminum fluoride mobility analyzer

YS / T 581.17-2010 Methods for chemical analysis of aluminum fluoride and determination of physical performance - Part 17: Determination of flow

This standard specifies the method for measuring the flow of aluminum fluoride, that a certain quality of aluminum fluoride through a special funnel, funnel flow time measurement sample all needed.

Funnel: stainless steel outer diameter of the funnel catchy 138.5mm, an inner diameter of 123mm, outlet diameter is 3.95mm ~ 4.0mm, the total height of 190.5mm wear resistant stainless steel catchy taper:. 60 °, the feed opening taper 15 °.

Aluminum fluoride bulk density measuring device

Bulk density measuring device , Including the following sections:

1, Funnel: upper inlet diameter 100mm, taper 60 °, neck length 8mm, brought in under the spout inside by 6mm.

2, cylindrical containers: volume of about 200mL, Nei Jing and about 1 in the high ratio: 6, the inner bottom is flat.

3, the annular funnel rack: There are pillars in the bottom stage of sturdy funnel annular mounting frame, long screws fixed to the pillars of the ring frame, and can be freely adjusted.

The funnel installed in the cylindrical container above the predetermined level surface.

Angle of repose of aluminum fluoride measurement device

Angle of repose measuring device Mainly includes the following components:

1, stainless steel funnel: Neijing 74mm, inside through between the feed opening 6mm, two steps of aperture plate fitted with a sieve of 1mm This funnel is fastened to the bracket.

2, galvanized steel plate: material made of steel or marble, stainless steel and other corrosion-resistant base plate is made, the minimum size of: Width 200mm, length 270mm, 18mm thick plating on the polished floor of the four cross engraved on the surface 45. Angle straight. right in the center section of the funnel has a fixed height gauge positioning pin, the bottom plate below 3 adjustable horizontal feet.

3, Funnel Holder: composed of stainless steel, its structure should be perpendicular to the centerline of the fastening funnel centering pin.

4, height gauge (determine the height of the metal cylinder): It is a cylinder surface finish made of stainless steel, high 40mm, the bottom has a recess so that the center of the bottom plate with the locating pin convergence.

The company also produces sells the following related products :

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment
FT-104 alumina bulk density tester; FT-104A alumina repose angle measurement
FT-104B repose angle measurement; FT-105 Apparent density analyzer
FT-105A active agents apparent density measuring device; FT-105B slurry was apparent density measuring device
FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester FT-102A vibration funnel bulk density tester

Angle of repose of aluminum fluoride, aluminum fluoride mobility analyzer analyzer angle of repose tester