Ricoeur licensing of alumina powder bulk density tester

Ricoeur licensing of alumina powder bulk density tester
 

Product description:

Brand: Ricoeur Model: FT-104
  • Origin: -
  • Rust ability: -
  • Phosphate coating impact resistance: -
  • Method of operation: -
Detailed description:
Custom processing: Type: Density Tester
Measuring range: Ricoeur brand alumina bulk density tester Samples can be measured state: Ricoeur licensing of alumina powder bulk density tester
Repeatability error: 1 Dimensions: 1 (mm)
Scope: Ricoeur licensing of alumina powder bulk density tester Custom processing:
Type: Density Tester Measuring range: Ricoeur brand alumina bulk density tester
Samples can be measured state: Ricoeur licensing of alumina powder bulk density tester Repeatability error: 1
Dimensions: 1 (mm) Scope: Ricoeur licensing of alumina powder bulk density tester

FT-104 alumina bulk density tester

FT-104 alumina bulk density tester according to the standard

In line with GB (alumina chemical analysis methods and determination of physical performance bulk density determination) T 6609.25-2004 technical specifications. Determination of bulk density / alumina chemical analysis methods and determination of physical performance - Part 25.

FT-104 alumina bulk density tester technical parameters

1. Funnel: mouth diameter 100mm, taper 60º, within the discharge port by 6mm.

2. cylinder: about 200ml, the inner diameter of the inner high ratio of 1: 6, the base outer diameter of 70mm

3; Material: Stainless steel

Ricoeur Instruments related products Recommended: FT-104A alumina / aluminum fluoride analyzer angle of repose; FT-104C aluminum fluoride (Alumina) Fluidity tester; FT-104 alumina bulk density tester

FT-104 alumina bulk density tester requirements

Bulk density measuring device , Including the following sections:

1, Funnel: upper inlet diameter 100mm, taper 60 °, neck length 8mm, brought in under the spout inside by 6mm.

2, cylindrical containers: volume of about 200mL, Nei Jing and about 1 in the high ratio: 6, the inner bottom is flat.

3, the annular funnel rack: There are pillars in the bottom stage of sturdy funnel annular mounting frame, long screws fixed to the pillars of the ring frame, and can be freely adjusted.

The funnel installed in the cylindrical container above the predetermined level surface.











FT-104 alumina bulk density tester

FT-104 alumina bulk density tester according to the standard

In line with GB (alumina chemical analysis methods and determination of physical performance bulk density determination) T 6609.25-2004 technical specifications. Determination of bulk density / alumina chemical analysis methods and determination of physical performance - Part 25.

FT-104 alumina bulk density tester technical parameters

1. Funnel: mouth diameter 100mm, taper 60º, within the discharge port by 6mm.

2. cylinder: about 200ml, the inner diameter of the inner high ratio of 1: 6, the base outer diameter of 70mm

3; Material: Stainless steel

Ricoeur Instruments related products Recommended: FT-104A alumina / aluminum fluoride analyzer angle of repose; FT-104C aluminum fluoride (Alumina) Fluidity tester; FT-104 alumina bulk density tester

FT-104 alumina bulk density tester requirements

Bulk density measuring device , Including the following sections:

1, Funnel: upper inlet diameter 100mm, taper 60 °, neck length 8mm, brought in under the spout inside by 6mm.

2, cylindrical containers: volume of about 200mL, Nei Jing and about 1 in the high ratio: 6, the inner bottom is flat.

3, the annular funnel rack: There are pillars in the bottom stage of sturdy funnel annular mounting frame, long screws fixed to the pillars of the ring frame, and can be freely adjusted.

The funnel installed in the cylindrical container above the predetermined level surface.