Natural powder bulk density, bulk density, Zhejiang analyzer, tester, apparent densitometer

Natural powder bulk density, bulk density, Zhejiang analyzer, tester, apparent densitometer
 

Product description:

  • Types of: other
Detailed description:
Repeatability error: 1 Samples can be measured state: Powder Natural bulk density / bulk density tester Zhejiang
Custom processing: Measuring range: Powder Natural bulk density / bulk density tester Zhejiang
Type: Density Tester Scope: Natural powder bulk density / bulk density tester Zhejiang
Dimensions: 12 (mm) Repeatability error:
Samples can be measured state: Custom processing:
Measuring range: Types of:
Scope: Dimensions:





Natural powder bulk density / Zhejiang bulk density meter / bulk density of dust / Hot Powder bulk density Tester / powder bulk density meter price / Ningbo bulk density tester

FT-103 bulk density tester

FT-103 bulk density tester It is based on national standards GB / T 16913.3-1997 provisions of design and production. The device is suitable for the determination of bulk density of dust.

FT-103 bulk density tester Please refer to the sample collection GB / T 16913.1-1997 dust Physics Experiment Part 1: Dust samples collected in the relevant regulations.

FT-103 bulk density tester Principle: Dust from the funnel mouth full of free fall at a certain height measuring cup; mass per unit volume of dust inside the cup measured bulk state, that dust bulk density.

FT-103 bulk density tester Structure: funnel (flow outlet diameter 12.7mm)

Funnel made of stainless steel, which funnel taper of 60 ° ± 0.5

FT-103A activated clay bulk density tester

GB 25571 Bulk density tester HGT2764 bulk density measuring device / industrial sodium peroxide bulk density measuring device

FT-103A activated clay bulk density measuring device Is based on national standards GB / T 25571-2010 national food safety standards, food additive provisions of activated clay design, production. The device is suitable for the determination of food additives, activated clay bulk density, while also meet HGT2764-2008 peroxide sodium carbonate industry industry standards for bulk density measuring device requirements.

FT-103A activated clay bulk density measuring device Principle: Dust from the funnel mouth full of free fall at a certain height measuring cup; quality measured within the measuring cup bulk state unit volume, namely bulk density.

FT-103A activated clay bulk density measuring device Structure: 2.1: funnel flow outlet diameter 30mm; funnel height: 135mm, funnel made of stainless steel, 2.2: cylinder diameter: 80mm, volume: 500ml

DMP-II Type common abrasive bulk density tester

DMP-II Type common abrasive bulk density tester According to international standard ISO9136: 1989 (Determination of bulk density coarse grains) and industry standard JB / T7984.2-1999 (Ordinary coarse grit abrasive Determination of bulk density) of the relevant technical requirements of development and production of special detection equipment, suitable for detecting manufacturing bonded abrasives and coated abrasives bulk density of coarse particles of abrasive materials, but also for the detection of other granular materials Bulk density Its detection methods and results and generic detection methods internationally with full versatility.
DMP-II Type common abrasive bulk density tester The main technical parameters
2.1 Measurement error: ≤ ± 0.02g / cm3.
2.2 measuring cylinder volume: 200 ± 0.5cm3.
2.3 Dimensions: 230mm (length) * 250mm (width) * 425mm (H)

DMP-II Type common abrasive bulk density tester

Note: Specific parameters, please keep in touch with us, as well as related products.

宁波斯柯特 capacity meter / Bulk Density Tester Merchants / Zhejiang Scott volumetric method bulk density meter / meter method Hayes Curt capacity loose density measurement / Beijing Scott capacity meter and bulk density tester factory / GB5060 Scott capacity meter bulk density tester quotes /

FT-101 Scott capacity meter Bulk Density Tester: Is my company based on the national standard GB5060-85 (metal powder bulk density measurement - Part 2: Scott capacity meter method) Development of powder bulk density testing device which the indicators are in line with national standards.

FT-101 Scott capacity meter Bulk Density Tester performance indicators:

1, Upper hopper assembly: Material: 304 stainless steel; upper diameter Φ112mm, lower end diameter Φ30mm, total length: 30 + 850mm mesh: 1.18mm stainless steel mesh.

2, Cloth box: Square, built four 1 mm thick stainless steel bezel.

3, Square funnel: 60 ° square cone, the bottom diameter of 12.5mm * 12.5mm.

4, Cylindrical Cup: Material: 304 stainless steel; volume of 25 ± 0.05 ml.

5, size: 100 mm * 160 mm * 358 mm.

Note: Specific parameters, please keep in touch with us, as well as related products.

Categories: 1. wire and cable tester and testing equipment; 2. The power wire tester and test equipment; 3. wires (harness) conduction tester; 4. Materials resistant to combustion / flame test equipment; 5. solid liquid hydrometer / density meter; 6. Powder Powder test equipment; 7. The terminal connectors test equipment; 8. Safety test equipment; 9. Rubber rubber products industry testing equipment 10. The powder metallurgy testing equipment; 11. lamps Detection equipment ,