| Weight: 11 (kg) || The scope of products: metal powder flowability tester, bulk density tester|
| Power: 1|| Operating voltage: 1 (V) |
| Custom processing:|| Dimensions: 1|
| Measuring range: Ricoeur instrument FL4-1 metal powder flowability tester, high-precision Bulk Density Tester|| weight: |
| Products Scope: || power supply: |
| Operating Voltage: || Custom processing: |
| Dimensions: || Measuring range: |
FL4-1 flowability and bulk density measuring device (brass) Bulk density measuring bulk density measuring device
Where can freely flow through the aperture of 2.5mm standard funnel powder, you can use this instrument to measure powder flowability. Powder flowability to 50g metal powder to flow through a standard funnel needed to represent.
We also accompanied by 100 g GBW12004 national standard level for calibration equipment.
In addition to the aperture of 2.5mm standard funnel, we also provide a pore size of 5.0 standard funnel.
Where can freely flow through the aperture of 2.5mm, 5.0mm standard funnel powder can use this instrument to measure the metal powder bulk density.
The instrument according to GB1479-84, GB1482-84 Standard Specification for production.
FL4-1 flowability and bulk density measuring device for measuring powder flowability and bulk density, this instrument is equipped with a metal powder flowability measurement standard substance with emery GBW12004.
Under funnel diameter: φ2.5㎜ and φ5.0㎜
Angle: 60 degrees
Capacity: 25 ml ℃ Contact Zeng Sheng Phone: 15088416993
FT-102 Hall flow meter flow and bulk density measuring device (stainless steel material)
FT-102 Hall flow meter is based on national standards GB 1482-84 The provisions of the design and production. The device is suitable metal powder flowability measurement standard funnel in. Where can freely flow through the aperture to 2.5mm Standard funnel powder, can use this device.
1, the principle
Metal powder flowability to 50g Time metal powder to flow through a standard funnel predetermined aperture required to represent.
2, the instrument structure
2.1 funnel ( Hole diameter 2.5mm)
Funnel made of stainless steel, and has a sufficient thickness and hardness to prevent deformation and excessive wear.
2.2 Bracket, base and receiver
Bracket for fixing the funnel. Base for mounting bracket and receiver, adjust the level, stable and vibration free. Stand height adjustment and fixed with the supplied wrench, funnel attached to the bracket. Receiver (Stainless steel plate) is placed in the base on to collect powder.
2.3 Balance (user-supplied)
Maximum weighing 100g ; Accuracy 0.05g .
Measurement time can be accurate to 0.01s .
The device is equipped with a volume of 25ml The stainless steel measuring cup. Users can refer GB GB 1479-84 The provisions of the completion of the metal powder density determination (funnel) loose.
3, the basic configuration
Models and Specifications
The number of
FT - 102
Stainless steel (Φ 2.5mm Or Φ5.0mm)
Stainless steel (Φ 31mm , 25ml )
ZSD-809 ( Electronic stopwatch)
4mm inner hexagon