The company operating the hot melt adhesive repose angle / mobility / bulk density measurement, quality assurance, welcome to consult the discussion.
FT-104B Angle of repose tester
FT-104B repose angle measurement based on GB11986-89 (measured surfactant powder and granules angle of repose) provides design requirements while meeting the ISO4324-1977; powders and granules measuring the angle of repose; also applies to the USP (United States Pharmacopeia ), BP (British Pharmacopoeia) and EP (European Pharmacopoeia) Specification requirements of the reference standard: DIN ISO 4324 - December 1983 ; Also be used for similar testing requirements and the common determination of the international test method to meet the requirements of the product specification liquidity.
FT-104B analyzer angle of repose angle of repose in the pharmaceutical industry particles refers angle conical heap loose bulk material sandwiched ramps and horizontal reflecting particle size of the particles friction or degree of liquidity. For the same kinds of materials, the larger the particle size the smaller the angle of repose, which is due to the greater adhesion between each other so; generally closer to spherical particles, the smaller the angle of repose.
FT-104B repose angle measurement in the formulation process, the intermediate good flowability, tablet weight difference of tablets, capsules, and granules amount of difference and so it is difficult to meet the requirements, so the process to aid in the study like the screening process stream, should be based on the angle of repose, the amount of difference as an indicator in the study screening process (tablets, granules and the like) drugs, we need to study the angle of repose of the particles, to examine the particle flow etc., generally at about 30 ° angle of repose for the best
FT-104B repose angle measurement can not only measured directly, but can be measured after the height and radius of the powder layer disc calculated. That tanθ = height / radius angle of repose is to check the quality of the powder flowability of the easiest method. The smaller the angle stop, indicating that the friction is smaller, the better liquidity, generally considered θ≤30 ° when liquidity is good, the production process to meet the liquidity needs of θ≤40 ° when viscous or particle size of the powder between 100 to powder particles less than 200μm interaction force is large and illiquid, and accordingly the larger measured angle of repose
FT-104B angle of repose tester Widely used in powder detect pharmaceuticals, industrial chemicals, washing, research institutions, quality inspection agency, etc. related to the powder and the particulate material; powder storage can provide changes in the nature of the case, particularly in storage silos and the like.
Ricoeur Instruments Also produces the following related products: Powder flowability tester / Bulk Density Tester / Hall flow meter / tap density tester / Scott capacity meter bulk density tester / bulk density Tester / aluminum powder Bulk Density Tester / measuring angle of repose instrument / angle of repose tester / apparent density analyzer / / aluminum fluoride (Alumina) Mobility analyzer, etc.
FT-104B angle of repose tester The instrument is suitable for routine determination of no clumps of powdered or granular detergent surfactants and angle of repose, they can also be used for other measuring the angle of repose of a similar nature powder and granules. Material flow under specified conditions to obtain The cone base angle called the angle of repose
Disc: Diameter 10mm
Funnel: diameter 155mm inner diameter of 145mm
There Related Products: FT-100B Practical Tap densitometer ; FZS4-4 Economical tap density tester; FT-100A Microcomputer Powder Density Tester , FT-104B Angle of repose measuring instrument. FT-103 Powder bulk density meter natural accumulation