[Measuring Instrument] - [Weighing & Measuring Apparatus] - [Other Weighing & Measuring Apparatus]

Supply FT-106A powder bulk density meter, diamond powder bulk density meter, bulk density tester

Supply FT-106A powder bulk density meter, diamond powder bulk density meter, bulk density tester
  • Supply FT-106A powder bulk density meter, diamond powder bulk density meter, bulk density tester
Product code: 20972400001
Unit price: 1 CNY  (0.15 USD)
Price unit: Per piece
Minimum order:
Other info:
Visit my shop
Brand: Ricoeur Instrument Model: FT-106A
Detailed description:
Weight: 1 (kg) The scope of products: FT-106A powder bulk density tester
Power: 1 Operating voltage: 1 (V)
Custom processing: Dimensions: 1
Measuring range: FT-106A powder bulk density meter, diamond powder bulk density meter, bulk density tester weight:
Products Scope: power supply:
Operating Voltage: Custom processing:
Dimensions: Measuring range:

FT-106A powder bulk density tester Is based on the international standard ISO9136-2: 1999 (E) (abrasives - Determination of bulk density - Part II: Powder) relevant technical requirements of the development and production of special detection equipment, instrument consists splice parts, vibration feed section, electrical control components. The powder tested load funnel, bulk powder under its own role in the steady state. When the electromagnetic oscillator startup, powder under the action of electromagnetic vibration in specific ways and means of measuring flows into the bucket, will fall into the measuring cylinder of powder Calibrating Weigh Calibrating measuring cylinder soot mass in the balance, and then divided by the measurement cylinder volume, you can measure the bulk density of the test Powder

FT-106A powder bulk density tester Scope: suitable for detecting manufacturing bonded abrasives and coated abrasives with powder bulk density, but also for the detection of diamond powder and bulk density of other fine powdery material, its detection methods and results. and generic detection methods internationally with full versatility.

Funnel Material: Stainless Steel;

Funnel Dimensions: Height 290mm; catchy diameter 190mm; spout inner diameter: 28mm; spout height: 38mm

Vibration slot Material: Stainless Steel

Vibration tank size: (210mm * 40mm * 30mm) ± 1mm

Measuring cylinder dimensions: diameter 64mm; inner height 62.2mm

Measuring cylinder V: (200 ± 0.5) cm3

Measurement error: ≤ ± 0.02g / cm3

FT-106A powder bulk density tester main technical parameters: lower funnel mouth diameter: 28mm; cylinder volume: 200ml; funnel spout height: 38mm; height of the drop measured powder: 140mm.







Instrument Co., Ltd. Ningbo Haishu Ricoeur

(Referred to as 'Ricoeur instrument' English: Ningbo Rlco instrument Co., LTD)

Began in 1999, the Department of Ricoeur instrument enterprise systems; Ricoeur instrument enterprise system is mainly engaged in precision testing equipment and advanced detection equipment research and development, production and sales for the integration of the Industrial Company to set up manufacturing facilities in Dongguan, Guangdong Huang Town, the company's. There 'Xinke instrument' 'Ricoeur instrument' II big trademark, the products meet the requirements of international standards of IEC, CCC, UL, CSA, VDE, JIS, KS, SEV, BSI, HD, KEMA, SSA and the like.

Companies' quality-oriented 'service first' operating principles. Meet the needs of our customers. Companies in the 'science and technology, creativity, innovation, progressive' entrepreneurial spirit, the introduction of advanced production equipment and manufacturing process, through continuous technology to improve and perfect the management, strive to provide customers the best quality products and service!

The company's products have the following eight series: Precision wire (Harness) Tester, harness (wire) conduction tester series; wire and cable tester with a full set of test equipment series; a full-power wire tester and test equipment series; ; mechanical equipment and test equipment series; safety equipment series; retardant material testing equipment series; direct reading of solid / liquid density meter series; powder powder testing instrument series.

Product is suitable for wire harness processing industry, wire and cable, household appliances, plastics, rubber, powder powder, metal, shoes, and other downstream manufacturing and related industries to provide the most professional testing instruments and testing equipment for manufacturing companies to provide the most complete product testing solutions and technical advice.

Since its inception, after years of development, adhere to the interdisciplinary, cross-industry diversification, product technology high-end line of business, and always pay attention to the introduction and training of personnel, we are committed to domestic and international market development and improve technological innovation and service quality, with many loyal customers to maintain good relations in various industries, product quality and widely acclaimed. Xinke instrument '' Ricoeur instrument 'will work with our customers to a total of the progress of development. Ricoeur instrument enterprise systems affiliated with Ningbo Haishu United Xin Electronic Technology Co., Ltd. Ningbo Haishu Ricoeur instruments and other related businesses.

FT-106A powder bulk density tester Is based on the international standard ISO9136-2: 1999 (E) (abrasives - Determination of bulk density - Part II: Powder) relevant technical requirements of the development and production of special detection equipment, instrument consists splice parts, vibration feed section, electrical control components. The powder tested load funnel, bulk powder under its own role in the steady state. When the electromagnetic oscillator startup, powder under the action of electromagnetic vibration in specific ways and means of measuring flows into the bucket, will fall into the measuring cylinder of powder Calibrating Weigh Calibrating measuring cylinder soot mass in the balance, and then divided by the measurement cylinder volume, you can measure the bulk density of the test Powder

FT-106A powder bulk density tester Scope: suitable for detecting manufacturing bonded abrasives and coated abrasives with powder bulk density, but also for the detection of diamond powder and bulk density of other fine powdery material, its detection methods and results. and generic detection methods internationally with full versatility.

Funnel Material: Stainless Steel;

Funnel Dimensions: Height 290mm; catchy diameter 190mm; spout inner diameter: 28mm; spout height: 38mm

Vibration slot Material: Stainless Steel

Vibration tank size: (210mm * 40mm * 30mm) ± 1mm

Measuring cylinder dimensions: diameter 64mm; inner height 62.2mm

Measuring cylinder V: (200 ± 0.5) cm3

Measurement error: ≤ ± 0.02g / cm3

FT-106A powder bulk density tester main technical parameters: lower funnel mouth diameter: 28mm; cylinder volume: 200ml; funnel spout height: 38mm; height of the drop measured powder: 140mm.

FT-106A powder bulk density tester Is based on the international standard ISO9136-2: 1999 (E) (abrasives - Determination of bulk density - Part II: Powder) relevant technical requirements of the development and production of special detection equipment, instrument consists splice parts, vibration feed section, electrical control components. The powder tested load funnel, bulk powder under its own role in the steady state. When the electromagnetic oscillator startup, powder under the action of electromagnetic vibration in specific ways and means of measuring flows into the bucket, will fall into the measuring cylinder of powder Calibrating Weigh Calibrating measuring cylinder soot mass in the balance, and then divided by the measurement cylinder volume, you can measure the bulk density of the test Powder

FT-106A powder bulk density tester Scope: suitable for detecting manufacturing bonded abrasives and coated abrasives with powder bulk density, but also for the detection of diamond powder and bulk density of other fine powdery material, its detection methods and results. and generic detection methods internationally with full versatility.

Funnel Material: Stainless Steel;

Funnel Dimensions: Height 290mm; catchy diameter 190mm; spout inner diameter: 28mm; spout height: 38mm

Vibration slot Material: Stainless Steel

Vibration tank size: (210mm * 40mm * 30mm) ± 1mm

Measuring cylinder dimensions: diameter 64mm; inner height 62.2mm

Measuring cylinder V: (200 ± 0.5) cm3

Measurement error: ≤ ± 0.02g / cm3

FT-106A powder bulk density tester main technical parameters: lower funnel mouth diameter: 28mm; cylinder volume: 200ml; funnel spout height: 38mm; height of the drop measured powder: 140mm.