Supply Ricoeur brand tap density tester, tap density meter, bulk density tester wholesale

Supply Ricoeur brand tap density tester, tap density meter, bulk density tester wholesale
 

Product description:

Brand: Ricoeur Instrument Model: 100A
Detailed description:
Repeatability error: 1 Samples can be measured state: Ricoeur brand tap density tester, tap density tester
Custom processing: Measuring range: Ricoeur brand tap density tester, tap density tester
Type: Density Tester Scope: Ricoeur brand tap density tester, tap density tester
Dimensions: 1 (mm) Repeatability error:
Samples can be measured state: Custom processing:
Measuring range: Types of:
Scope: Dimensions:

Cheap FZS4-4 tap density tester

Cheap FZS4-4 tap density tester (Original FZS4-4B)

Cheap FZS4-4 tap density tester Production requirements of the instrumentation system according to international standard ISO3953 requirements of production, GB T 5162-2006 (determination of metal powder tap density) / satisfied, and with reference to the United States Pharmacopoeia independent research and manufacture of the powder density test instruments for measuring vibration powder real density of powder through the tap, its density increases the percentage is a comprehensive reflection of the powder variety of performance. The instrument is adopted by an eccentric rotation causes directional slider up and down the slide, percussion drill seat, so that the cylinder within the powder gradually tap means, mainly used for the determination of various shapes powder tap density, non-metallic powder also can learn to use.

Cheap FZS4-4 tap density tester Technical Parameters

Vibration stroke tap apparatus 3 ± 0.1MM

Vibration frequency 250 ± 15 beats per minute

Glass cylinder volume is 100 ± 1.0ml, graduated some high 175 ± 10mm. Glass cylinder volume of 25 ± 0.5ml scale section of a high 135 ± 7mm. 100ml graduated cylinder volume between the smallest scale is 1ml, measurement accuracy of ± 0.5cm ; cylinder between 25cm minimum scale volume of 0.2cm, measurement accuracy of ± 0.1cm

Cheap FZS4-4 tap density tester test object
Various metal powders: such as aluminum powder, zirconium powder, nickel powder, tungsten powder, tin powder, zinc powder, molybdenum powder, magnesium powder, copper powder and other precious metals, an alloy powder or metal oxide powder and the like.
Non-metallic powder: such as talc, kaolin, calcium carbonate, coal, phosphor, brucite, calcite, wollastonite, tourmaline, diamond, barite, fluorite, zeolite, boron carbide, clay, graphite, quartz, gypsum, bentonite, diatomaceous earth, zirconium silicate, alumina, mica, clay, and the like.
Other powders: such as soil, dyes, pharmaceuticals, pesticides, abrasives, paints, food additives, catalysts, cement, sand and other rivers

Cheap FZS4-4 tap density analyzer instruction video link:

http: //v.youku.com/ v_show / id_XMzc3NDUxOTU2 html.

http: //www.tudou.com/ programs / view / UR6wdJ0OKAM /

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder test solutions

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester







FT-100 tap density tester / Powder Density Tester

FT-100 Powder Density Tester Is based on GB / T 5162-2006 / ISO3953: 1993 (metal powder tap density measurement), and with reference to the United States Pharmacopoeia independent research and manufacture of the powder density testing equipment, with independent intellectual property rights instrument covers the national standard GB / T 5162-. 20 06 / ISO3953: 1993 in the indicators.

FT-100 Powder Density Tester By a variable speed motor, vibration components, micro and mini printers and other components. And the instrument with a compact, solid, simple operation.

FT-100 Powder Density Tester Technical Specifications:

  1. Sample weight: ≤500.00 g;
  2. Sample volume: ≤250.00 milliliter;
  3. Single frequency vibration: 0 ~ 99999 Views (when set to 0 Times when the result is output as 'bulk density') ;
  4. Allow the motor torque: 0.86 N.m;
  5. Vibration frequency: 0 to 300 rev / min (adjustable);
  6. Vibration amplitude: maximum 14mm, 1-14mm adjustable integer;
  7. Repeatability error: ≤1%;
  8. Accuracy error: ≤1%;
  9. Input Power: AC 220V (50Hz / 60Hz), 40W.

FT-100 Powder density tester objects
Various metal powders: such as aluminum powder, zirconium powder, nickel powder, tungsten powder, tin powder, zinc powder, molybdenum powder, magnesium powder, copper powder and other precious metals, an alloy powder or metal oxide powder and the like.
Non-metallic powder: such as talc, kaolin, calcium carbonate, coal, phosphor, brucite, calcite, wollastonite, tourmaline, diamond, barite, fluorite, zeolite, boron carbide, clay, graphite, quartz, gypsum, bentonite, diatomaceous earth, zirconium silicate, alumina, mica, clay, and the like.
Other powders: such as soil, dyes, pharmaceuticals, pesticides, abrasives, paints, food additives, catalysts, cement, sand and other rivers.

Note: Specific parameters, please keep in touch with us, as well as related products.