Powder flowability tester, densitometer, bulk density tester

Powder flowability tester, densitometer, bulk density tester
 

Product description:

Brand: Ricoeur Instrument Model: 1
  • Types of: other
Detailed description:
Custom processing: Type: Density Tester
Measuring range: powder flowability tester, densitometer, bulk density tester Samples can be measured state: powder flowability tester, density meter, bulk density tester
Repeatability error: 1 Dimensions: 222 (mm)
Scope: powder flowability tester, densitometer, bulk density tester Custom processing:
Type: Density Tester Measuring range: powder flowability tester, densitometer, bulk density tester
Samples can be measured state: powder flowability tester, density meter, bulk density tester Repeatability error: 1
Dimensions: 222 (mm) Scope: powder flowability tester, densitometer, bulk density tester

FT-102 Powder Hall flow meter / Powder Bulk Density Tester / FZ4-3 type vibration funnel Bulk Density Tester

Deals powder flowability tester / Bulk Density Tester / Hall flow meter

Hot FL4-1 measuring powder flowability / bulk density meter

Powder Hall flow meter / powder flowability and bulk density measuring device

Hall flow meter / bulk density meter / powder powder flowability and densitometer / powder flowability and bulk density measuring device measuring bulk density meter / powder bulk density tester

GB1479 / GB1482 powder flowability and bulk density meter

FT-102 Hall flow meter / Bulk Density Tester (stainless steel material)

FT-102 Hall flow meter flow and bulk density measuring device The instrument is based on place of GB1479-84 GB 1482-2010-T metal powder flowability measurement standard funnel (Hall flow meter), provides design standards GB1482-84 production, production. The device is suitable for use standard funnel determination of metal powder flowability. Where can freely flow through the aperture to 2.5mm Standard funnel powder, can use this device.

FT-102 Hall flow meter / Bulk Density Tester It is based on national standards GB provisions of the design and production of 1482-84.

This device is intended for determination of metal powder flowability using a standard funnel in.

Where can freely flow through the aperture of 2.5mm standard funnel powder, can use this device.

FT-102 Hall flow meter / Bulk Density Tester Principle

Metal powder flowability to 50g metal powder to flow through a standard funnel predetermined aperture required to represent.

FT-102 Hall flow meter / Bulk Density Tester 2.1 funnel (hole diameter 2.5mm)

Funnel made of stainless steel, and has a sufficient thickness and hardness to prevent deformation and excessive wear.

2.2 bracket, base and receiver

Bracket for fixing the funnel. Base for mounting bracket and receiver, adjust the level, stable and vibration free. Stand height adjustment and fixed with the supplied wrench, funnel attached to the bracket. Receiver (Stainless steel plate) is placed in the base on to collect powder.

2.3 Balances (user-supplied)

The largest weighing 100g; precision 0.05g.

2.4 Stopwatch

Measurement time can be accurate to 0.01s.

2.5 cups

The device is equipped with a volume of 25ml stainless steel measuring cup. Users can complete the determination of metal powder bulk density (Funnel method) reference to the provisions of the national standard GB 1479-84.

FT-102 Hall flow meter / Bulk Density Tester Basic configuration: The stand: 1 set; Funnel: Stainless steel (Φ2.5mm, Φ5.0mm) each one; cup; stainless steel (Φ31mm, 25ml) 1 只; stopwatch 1; overflow trays stainless steel 1; brush 1; ruler 15cm1 the manual; warranty card; certificate.

FT-102 Hall flow meter / Bulk Density Tester









FT-102 Powder Hall flow meter / Powder Bulk Density Tester / FZ4-3 type vibration funnel Bulk Density Tester

Deals powder flowability tester / Bulk Density Tester / Hall flow meter

Hot FL4-1 measuring powder flowability / bulk density meter

Powder Hall flow meter / powder flowability and bulk density measuring device

Hall flow meter / bulk density meter / powder powder flowability and densitometer / powder flowability and bulk density measuring device measuring bulk density meter / powder bulk density tester

GB1479 / GB1482 powder flowability and bulk density meter

FT-102 Hall flow meter / Bulk Density Tester (stainless steel material)

FT-102 Hall flow meter flow and bulk density measuring device The instrument is based on place of GB1479-84 GB 1482-2010-T metal powder flowability measurement standard funnel (Hall flow meter), provides design standards GB1482-84 production, production. The device is suitable for use standard funnel determination of metal powder flowability. Where can freely flow through the aperture to 2.5mm Standard funnel powder, can use this device.

FT-102 Hall flow meter / Bulk Density Tester It is based on national standards GB provisions of the design and production of 1482-84.

This device is intended for determination of metal powder flowability using a standard funnel in.

Where can freely flow through the aperture of 2.5mm standard funnel powder, can use this device.

FT-102 Hall flow meter / Bulk Density Tester Principle

Metal powder flowability to 50g metal powder to flow through a standard funnel predetermined aperture required to represent.

FT-102 Hall flow meter / Bulk Density Tester 2.1 funnel (hole diameter 2.5mm)

Funnel made of stainless steel, and has a sufficient thickness and hardness to prevent deformation and excessive wear.

2.2 bracket, base and receiver

Bracket for fixing the funnel. Base for mounting bracket and receiver, adjust the level, stable and vibration free. Stand height adjustment and fixed with the supplied wrench, funnel attached to the bracket. Receiver (Stainless steel plate) is placed in the base on to collect powder.

2.3 Balances (user-supplied)

The largest weighing 100g; precision 0.05g.

2.4 Stopwatch

Measurement time can be accurate to 0.01s.

2.5 cups

The device is equipped with a volume of 25ml stainless steel measuring cup. Users can complete the determination of metal powder bulk density (Funnel method) reference to the provisions of the national standard GB 1479-84.

FT-102 Hall flow meter / Bulk Density Tester Basic configuration: The stand: 1 set; Funnel: Stainless steel (Φ2.5mm, Φ5.0mm) each one; cup; stainless steel (Φ31mm, 25ml) 1 只; stopwatch 1; overflow trays stainless steel 1; brush 1; ruler 15cm1 the manual; warranty card; certificate.

FT-102 Hall flow meter / Bulk Density Tester

FT-102 Powder Hall flow meter / Powder Bulk Density Tester / FZ4-3 type vibration funnel Bulk Density Tester

Deals powder flowability tester / Bulk Density Tester / Hall flow meter

Hot FL4-1 measuring powder flowability / bulk density meter

Powder Hall flow meter / powder flowability and bulk density measuring device

Hall flow meter / bulk density meter / powder powder flowability and densitometer / powder flowability and bulk density measuring device measuring bulk density meter / powder bulk density tester

GB1479 / GB1482 powder flowability and bulk density meter

FT-102 Hall flow meter / Bulk Density Tester (stainless steel material)

FT-102 Hall flow meter flow and bulk density measuring device The instrument is based on place of GB1479-84 GB 1482-2010-T metal powder flowability measurement standard funnel (Hall flow meter), provides design standards GB1482-84 production, production. The device is suitable for use standard funnel determination of metal powder flowability. Where can freely flow through the aperture to 2.5mm Standard funnel powder, can use this device.

FT-102 Hall flow meter / Bulk Density Tester It is based on national standards GB provisions of the design and production of 1482-84.

This device is intended for determination of metal powder flowability using a standard funnel in.

Where can freely flow through the aperture of 2.5mm standard funnel powder, can use this device.

FT-102 Hall flow meter / Bulk Density Tester Principle

Metal powder flowability to 50g metal powder to flow through a standard funnel predetermined aperture required to represent.

FT-102 Hall flow meter / Bulk Density Tester 2.1 funnel (hole diameter 2.5mm)

Funnel made of stainless steel, and has a sufficient thickness and hardness to prevent deformation and excessive wear.

2.2 bracket, base and receiver

Bracket for fixing the funnel. Base for mounting bracket and receiver, adjust the level, stable and vibration free. Stand height adjustment and fixed with the supplied wrench, funnel attached to the bracket. Receiver (Stainless steel plate) is placed in the base on to collect powder.

2.3 Balances (user-supplied)

The largest weighing 100g; precision 0.05g.

2.4 Stopwatch

Measurement time can be accurate to 0.01s.

2.5 cups

The device is equipped with a volume of 25ml stainless steel measuring cup. Users can complete the determination of metal powder bulk density (Funnel method) reference to the provisions of the national standard GB 1479-84.

FT-102 Hall flow meter / Bulk Density Tester Basic configuration: The stand: 1 set; Funnel: Stainless steel (Φ2.5mm, Φ5.0mm) each one; cup; stainless steel (Φ31mm, 25ml) 1 只; stopwatch 1; overflow trays stainless steel 1; brush 1; ruler 15cm1 the manual; warranty card; certificate.

FT-102 Hall flow meter / Bulk Density Tester