[Measuring Instrument] - [Weighing & Measuring Apparatus] - [Other Weighing & Measuring Apparatus]

Supply Ricoeur instrument vibration type Bulk Density Tester | magnetic oxide powder densitometer

Supply Ricoeur instrument vibration type Bulk Density Tester | magnetic oxide powder densitometer
  • Supply Ricoeur instrument vibration type Bulk Density Tester | magnetic oxide powder densitometer
Product code: 20954200001
Unit price: 1 CNY  (0.15 USD)
Price unit: Per piece
Minimum order:
Other info:
Visit my shop
Brand: Ricoeur Instrument Model: FT-102A
Detailed description:
The company operating the vibratory bulk density tester magnetic oxide bark, quality assurance, welcome to consult the discussion.

FS4-2 Skoda Bengtsson bulk density tester : According to GB / T 1479.2-2011 metal powder bulk density determination Part 2: Scott capacity meter method instead of GB GB5060-85 (Determination of bulk density of metal powders - Part II: Scott capacity meter method) Development of powder bulk density test device at the same time meet international standards IS0 3923-2:. 1981 {metal powder bulk density measurement - Part 2: Scott capacity meter method) the basic structure and parameters of the requirements provided in its the indicators are in line with provisions of the standard

FS4-2 Skoda Bengtsson bulk density tester It is based on national GB5060-85 (The second part of the metal powder bulk density measurement method: Scott capacity meter method) designs, manufactures; also comply with international standards ISO 3932/2 (Metal powder bulk density of Determination 2 Section: Scott capacity meter method) The test device is suitable not freely flow through the aperture of the funnel method 5mm It funnels and vibrating funnel method is easy to change the properties of powder

principle:

Powder into the upper combination hopper sieve, natural or rely on external inflows cloth box, alternately through the fabric tank four tilt angle 25 ° Glass and square funnel, and finally into a known volume of a cylindrical cup, a loose state and then weigh the quality of the powder cylinder cup

Albert Instrument Co., Ltd. Ningbo Jiangbei Ricoeur. Instrument Co., Ltd. Ningbo Haishu Ricoeur ,

Major production and marketing: FL4-1 Metal powder flowability tester, bulk density meter, Hall flow meter , Liquidity and bulk density measurement device, a Hall flow meter, bulk density meter, the powder fluidity and appearance Density Tester, powder flowability and bulk density measuring device measuring bulk density, bulk density meter. The bulk density tester , Activated clay bulk density tester , Ordinary abrasive bulk density tester , Particle packing density analyzer, GB 25571 Bulk density analyzer, GB / T 16913 bulk density meter, angle of repose tester, powder bulk density meter, dust bulk density meter, the powder bulk density tester. Scott capacity meter , Bulk density test , Keke capacity meter Bulk Density Tester , Powder Density Tester , Tap density tester , Apparent density analyzer , Chemical apparent density analyzer, plastic profile factory apparent density analyzer. Repose angle measurement, angle of repose tester, flow tester FS4-2 Skoda Bengtsson bulk density tester Performance:

1, Upper hopper assembly: Material: 304 stainless steel; upper diameter Φ112mm, lower end diameter Φ30mm, total length: 30 + 850mm mesh: 1.18mm stainless steel mesh.

2, Cloth box: Square, built four 1 mm thick stainless steel bezel.

3, Square funnel: 60 ° square cone, the bottom diameter of 12.5mm * 12.5mm.

4, Cylindrical Cup: Material: 304 stainless steel; volume of 25 ± 0.05 ml.

5, size: 100 mm * 160 mm * 358 mm.

Note: Specific parameters, please keep in touch with us, as well as supporting the product

Ricoeur Instruments Tips, as well as associated products FT-102A vibration funnel bulk density tester, FT-100A tap density tester; FT-101 Scott capacity meter bulk density tester, FT-102 Hall flow meter / Bulk Density Tester - stainless steel ; FL4-1 Hall flow meter / powder flowability tester - brass

FT-101 Scott capacity meter Bulk Density Tester: is based on the determination of GB / T 1479.2-2011 metal powder bulk density of the two parts of our company: Scott capacity meter method instead of GB GB5060-85 (metal powders - Determination of density - Part II: Scott capacity meter method) Development of powder bulk density test device at the same time meet international standards IS0 3923-2: 1981 {Determination of metal powder bulk density - Part 2: Skoda Special capacity meter method). provided in the basic structure and parameters required, the indicators are in line with standards.

sampling:

3.1 Each measured powder bulk density, should at least take 100cm 3 Sample volume, performed in triplicate.

3.2 Typically, the powder was measured according to the reception state, in some cases, the powder should be dry, but if the powder is easily oxidized, should be dried under vacuum or inert atmosphere protection. If the powder contains volatile substances, is not allowed to bake dry

FT-101 Scott capacity meter Bulk Density Tester Performance:

6, Upper hopper assembly: Material: 304 stainless steel; upper diameter Φ112mm, lower end diameter Φ30mm, total length: 30 + 850mm mesh: 1.18mm stainless steel mesh.

7, Cloth box: Square, built four 1 mm thick stainless steel bezel.

8, Square funnel: 60 ° square cone, the bottom diameter of 12.5mm * 12.5mm.

9, Cylindrical Cup: Material: 304 stainless steel; volume of 25 ± 0.05 ml.

10. size: 100 mm * 160 mm * 358 mm.

The test results are calculated as follows:

Than the quality and volume of the metal powder bulk density is calculated as follows:

Where: ρ as : Powder Pine Scott capacity meter method measured density, g / cm3,

m: mass of metal powder, g;

V: volume of loose powder, cm3.

Take the arithmetic average of the three measured results reported final results accurate to 0.01g / cm 3 When the difference between the results of three measurements of more than 1% of the average, the maximum and minimum values ​​should be reported with the results.

Ricoeur Instruments Tips, as well as associated products FT-102A vibration funnel bulk density tester, FT-100A tap density tester; FT-101 Scott capacity meter bulk density tester, FT-102 Hall flow meter / Bulk Density Tester - stainless steel ; FL4-1 Hall flow meter / powder flowability tester - brass

Note: Specific parameters, please keep in touch with us, as well as related products.