[Measuring Instrument] - [Weighing & Measuring Apparatus] - [Other Weighing & Measuring Apparatus]

Supply of alumina / aluminum fluoride analyzer angle of repose, angle of repose of powder tester

Supply of alumina / aluminum fluoride analyzer angle of repose, angle of repose of powder tester
  • Supply of alumina / aluminum fluoride analyzer angle of repose, angle of repose of powder tester
Product code: 20953600001
Unit price: 3500 CNY  (509.57 USD)
Price unit: Per piece
Minimum order:
Other info:
Visit my shop
Brand: RICO Ricoeur Model: FT-104A
Detailed description:
Type: Density Tester Scope: alumina / aluminum fluoride analyzer angle of repose, angle of repose of powder tester
Repeatability error: 1 Samples can be measured state: 1
Custom processing: Dimensions: 1 (mm)
Measuring range: 1 Type: Density Tester
Scope: alumina / aluminum fluoride analyzer angle of repose, angle of repose of powder tester Repeatability error: 1
Samples can be measured state: 1 Custom processing:
Dimensions: 1 (mm) Measuring range: 1

FT-104A Alumina / aluminum fluoride analyzer angle of repose

(Alumina chemical analysis methods and determination of physical performance: Determination of repose angle) in accordance with national standards GB / T6609.24-2004 designed and manufactured for measuring the angle of repose of the powder under natural flow conditions.

Instrument Co., Ltd. Ningbo Haishu Ricoeur After years of development, adhere to the interdisciplinary, cross-industry diversification, product technology high-end line of business, and always pay attention to the introduction and training of personnel, we are committed to domestic and international market development and improve technological innovation and service quality, and Many loyal customers in various industries to maintain good relations, product quality and widely acclaimed. Xinke instrument '' Ricoeur instrument 'will work with our customers to a total of the progress of development. Ricoeur instrument enterprise systems affiliated with Ningbo Haishu United Xin Electronic Technology Co., Ltd. Ningbo Haishu Ricoeur instruments and other related businesses.

FT-104A Alumina repose angle meter meet GBT 16913-2008 dust and physical test methods GB / T 18702-2002 coal repose angle measuring method is also applicable to other products repose angle measurement, the measuring method is similar to the international phase.

Stainless steel funnel: The inner diameter of 74mm, 6mm inside diameter of the feed opening

Weight: about 16kg

Angle of repose of aluminum fluoride measurement device

Angle of repose measuring device Mainly includes the following components:

1, stainless steel funnel: Neijing 74mm, inside through between the feed opening 6mm, two steps of aperture plate fitted with a sieve of 1mm This funnel is fastened to the bracket.

2, galvanized steel plate: material made of steel or marble, stainless steel and other corrosion-resistant base plate is made, the minimum size of: Width 200mm, length 270mm, 18mm thick plating on the polished floor of the four cross engraved on the surface 45. Angle straight. right in the center section of the funnel has a fixed height gauge positioning pin, the bottom plate below 3 adjustable horizontal feet.

3, Funnel Holder: composed of stainless steel, its structure should be perpendicular to the centerline of the fastening funnel centering pin.

4, height gauge (determine the height of the metal cylinder): It is a cylinder surface finish made of stainless steel, high 40mm, the bottom has a recess so that the center of the bottom plate with the locating pin convergence.

Ricoeur Instruments related products Recommended: FT-104A alumina / aluminum fluoride analyzer angle of repose; FT-104C aluminum fluoride (Alumina) Fluidity tester; FT-104 alumina bulk density tester

FT-104A repose angle measurement operation of the video:

http: //www.tudou.com/ programs / view / czQAxBWxrmE /

FT-103B dust analyzer angle of repose angle of repose tester (injection limited underside of law)

FT-103B dust analyzer angle of repose standard request

GBT 16913-2008 dust dust physical test methods repose angle measurement (injection limited underside of law)

FT-103B dust analyzer angle of repose principle:

Sufficient overflowing trays dust injected from the mouth of the funnel to the horizontal feed tray; measure dust accumulation and the bottom horizontal bevel sandwiched acute angle, that dust angle of repose.

FT-103B dust analyzer angle of repose Test requirements and procedures

Angle of repose measuring device dust injection limited underside of law, should be placed on the test stand; funnel plugged with a stopper spout would like dust sample loading cylinder filled with a blade Calibrating poured into the funnel back out of the stopper. , so that dust from the funnel orifice outflow; for bad fluidity dust, dust can be used to make knitting stir continuously living on trays until all the dust out of the rotation protractor to measure out on trays dust cone bus and the horizontal plane. clip acute angle, that angle of repose, and the records shall be continuously measured 3 times to 5 times, find the arithmetic mean and standard deviation a A

FT-103B dust analyzer angle of repose Technical Parameters:

1, the funnel taper 60 ° ± 0.5 °;

2, the outflow diameter 5mm, funnel and the lower center tray center should be on a vertical line;

3, along with the disk bottom spout distance 80mm 2 mm, protractor 7.5cm ~ 10 cm;

4, material disc diameter 80 mm, volume 100 ml graduated cylinder;

5, straight blade-like dust, knitting;

Ricoeur Instrument Related Products Recommended: Hall flow meter / flowability and bulk density measuring device / Hall flow meter / bulk density meter / powder fluidity and appearance Density Tester / powder flowability and bulk density measuring device measuring bulk density / bulk density Tester / bulk density tester / activated clay bulk density tester / ordinary abrasive bulk density tester quotes / particle packing density analyzer / GB 25571 Bulk density analyzer / GB / T 16913 bulk density tester / angle of repose tester / powder bulk density tester / bulk density meter factory dust / powder bulk density tester / Scott capacity meter / bulk density tester / Scott capacity meter Bulk Density Tester / powder Density Tester / vibration tap density tester / apparent density analyzer / Special Chemical apparent density analyzer / Plastic Profile Factory apparent density analyzer

FT-104A Alumina / aluminum fluoride analyzer angle of repose

(Alumina chemical analysis methods and determination of physical performance: Determination of repose angle) in accordance with national standards GB / T6609.24-2004 designed and manufactured for measuring the angle of repose of the powder under natural flow conditions.

Instrument Co., Ltd. Ningbo Haishu Ricoeur After years of development, adhere to the interdisciplinary, cross-industry diversification, product technology high-end line of business, and always pay attention to the introduction and training of personnel, we are committed to domestic and international market development and improve technological innovation and service quality, and Many loyal customers in various industries to maintain good relations, product quality and widely acclaimed. Xinke instrument '' Ricoeur instrument 'will work with our customers to a total of the progress of development. Ricoeur instrument enterprise systems affiliated with Ningbo Haishu United Xin Electronic Technology Co., Ltd. Ningbo Haishu Ricoeur instruments and other related businesses.

FT-104A Alumina repose angle meter meet GBT 16913-2008 dust and physical test methods GB / T 18702-2002 coal repose angle measuring method is also applicable to other products repose angle measurement, the measuring method is similar to the international phase.

Stainless steel funnel: The inner diameter of 74mm, 6mm inside diameter of the feed opening

Weight: about 16kg

Angle of repose of aluminum fluoride measurement device

Angle of repose measuring device Mainly includes the following components:

1, stainless steel funnel: Neijing 74mm, inside through between the feed opening 6mm, two steps of aperture plate fitted with a sieve of 1mm This funnel is fastened to the bracket.

2, galvanized steel plate: material made of steel or marble, stainless steel and other corrosion-resistant base plate is made, the minimum size of: Width 200mm, length 270mm, 18mm thick plating on the polished floor of the four cross engraved on the surface 45. Angle straight. right in the center section of the funnel has a fixed height gauge positioning pin, the bottom plate below 3 adjustable horizontal feet.

3, Funnel Holder: composed of stainless steel, its structure should be perpendicular to the centerline of the fastening funnel centering pin.

4, height gauge (determine the height of the metal cylinder): It is a cylinder surface finish made of stainless steel, high 40mm, the bottom has a recess so that the center of the bottom plate with the locating pin convergence.

Ricoeur Instruments related products Recommended: FT-104A alumina / aluminum fluoride analyzer angle of repose; FT-104C aluminum fluoride (Alumina) Fluidity tester; FT-104 alumina bulk density tester

FT-104A repose angle measurement operation of the video:

http: //www.tudou.com/ programs / view / czQAxBWxrmE /

FT-103B dust analyzer angle of repose angle of repose tester (injection limited underside of law)

FT-103B dust analyzer angle of repose standard request

GBT 16913-2008 dust dust physical test methods repose angle measurement (injection limited underside of law)

FT-103B dust analyzer angle of repose principle:

Sufficient overflowing trays dust injected from the mouth of the funnel to the horizontal feed tray; measure dust accumulation and the bottom horizontal bevel sandwiched acute angle, that dust angle of repose.

FT-103B dust analyzer angle of repose Test requirements and procedures

Angle of repose measuring device dust injection limited underside of law, should be placed on the test stand; funnel plugged with a stopper spout would like dust sample loading cylinder filled with a blade Calibrating poured into the funnel back out of the stopper. , so that dust from the funnel orifice outflow; for bad fluidity dust, dust can be used to make knitting stir continuously living on trays until all the dust out of the rotation protractor to measure out on trays dust cone bus and the horizontal plane. clip acute angle, that angle of repose, and the records shall be continuously measured 3 times to 5 times, find the arithmetic mean and standard deviation a A

FT-103B dust analyzer angle of repose Technical Parameters:

1, the funnel taper 60 ° ± 0.5 °;

2, the outflow diameter 5mm, funnel and the lower center tray center should be on a vertical line;

3, along with the disk bottom spout distance 80mm 2 mm, protractor 7.5cm ~ 10 cm;

4, material disc diameter 80 mm, volume 100 ml graduated cylinder;

5, straight blade-like dust, knitting;

Ricoeur Instrument Related Products Recommended: Hall flow meter / flowability and bulk density measuring device / Hall flow meter / bulk density meter / powder fluidity and appearance Density Tester / powder flowability and bulk density measuring device measuring bulk density / bulk density Tester / bulk density tester / activated clay bulk density tester / ordinary abrasive bulk density tester quotes / particle packing density analyzer / GB 25571 Bulk density analyzer / GB / T 16913 bulk density tester / angle of repose tester / powder bulk density tester / bulk density meter factory dust / powder bulk density tester / Scott capacity meter / bulk density tester / Scott capacity meter Bulk Density Tester / powder Density Tester / vibration tap density tester / apparent density analyzer / Special Chemical apparent density analyzer / Plastic Profile Factory apparent density analyzer

FT-104A Alumina / aluminum fluoride analyzer angle of repose

(Alumina chemical analysis methods and determination of physical performance: Determination of repose angle) in accordance with national standards GB / T6609.24-2004 designed and manufactured for measuring the angle of repose of the powder under natural flow conditions.

Instrument Co., Ltd. Ningbo Haishu Ricoeur After years of development, adhere to the interdisciplinary, cross-industry diversification, product technology high-end line of business, and always pay attention to the introduction and training of personnel, we are committed to domestic and international market development and improve technological innovation and service quality, and Many loyal customers in various industries to maintain good relations, product quality and widely acclaimed. Xinke instrument '' Ricoeur instrument 'will work with our customers to a total of the progress of development. Ricoeur instrument enterprise systems affiliated with Ningbo Haishu United Xin Electronic Technology Co., Ltd. Ningbo Haishu Ricoeur instruments and other related businesses.

FT-104A Alumina repose angle meter meet GBT 16913-2008 dust and physical test methods GB / T 18702-2002 coal repose angle measuring method is also applicable to other products repose angle measurement, the measuring method is similar to the international phase.

Stainless steel funnel: The inner diameter of 74mm, 6mm inside diameter of the feed opening

Weight: about 16kg

Angle of repose of aluminum fluoride measurement device











Angle of repose measuring device Mainly includes the following components:

1, stainless steel funnel: Neijing 74mm, inside through between the feed opening 6mm, two steps of aperture plate fitted with a sieve of 1mm This funnel is fastened to the bracket.

2, galvanized steel plate: material made of steel or marble, stainless steel and other corrosion-resistant base plate is made, the minimum size of: Width 200mm, length 270mm, 18mm thick plating on the polished floor of the four cross engraved on the surface 45. Angle straight. right in the center section of the funnel has a fixed height gauge positioning pin, the bottom plate below 3 adjustable horizontal feet.

3, Funnel Holder: composed of stainless steel, its structure should be perpendicular to the centerline of the fastening funnel centering pin.

4, height gauge (determine the height of the metal cylinder): It is a cylinder surface finish made of stainless steel, high 40mm, the bottom has a recess so that the center of the bottom plate with the locating pin convergence.

Ricoeur Instruments related products Recommended: FT-104A alumina / aluminum fluoride analyzer angle of repose; FT-104C aluminum fluoride (Alumina) Fluidity tester; FT-104 alumina bulk density tester

FT-104A repose angle measurement operation of the video:

http: //www.tudou.com/ programs / view / czQAxBWxrmE /

FT-103B dust analyzer angle of repose angle of repose tester (injection limited underside of law)

FT-103B dust analyzer angle of repose standard request

GBT 16913-2008 dust dust physical test methods repose angle measurement (injection limited underside of law)

FT-103B dust analyzer angle of repose principle:

Sufficient overflowing trays dust injected from the mouth of the funnel to the horizontal feed tray; measure dust accumulation and the bottom horizontal bevel sandwiched acute angle, that dust angle of repose.

FT-103B dust analyzer angle of repose Test requirements and procedures

Angle of repose measuring device dust injection limited underside of law, should be placed on the test stand; funnel plugged with a stopper spout would like dust sample loading cylinder filled with a blade Calibrating poured into the funnel back out of the stopper. , so that dust from the funnel orifice outflow; for bad fluidity dust, dust can be used to make knitting stir continuously living on trays until all the dust out of the rotation protractor to measure out on trays dust cone bus and the horizontal plane. clip acute angle, that angle of repose, and the records shall be continuously measured 3 times to 5 times, find the arithmetic mean and standard deviation a A

FT-103B dust analyzer angle of repose Technical Parameters:

1, the funnel taper 60 ° ± 0.5 °;

2, the outflow diameter 5mm, funnel and the lower center tray center should be on a vertical line;

3, along with the disk bottom spout distance 80mm 2 mm, protractor 7.5cm ~ 10 cm;

4, material disc diameter 80 mm, volume 100 ml graduated cylinder;

5, straight blade-like dust, knitting;

Ricoeur Instrument Related Products Recommended: Hall flow meter / flowability and bulk density measuring device / Hall flow meter / bulk density meter / powder fluidity and appearance Density Tester / powder flowability and bulk density measuring device measuring bulk density / bulk density Tester / bulk density tester / activated clay bulk density tester / ordinary abrasive bulk density tester quotes / particle packing density analyzer / GB 25571 Bulk density analyzer / GB / T 16913 bulk density tester / angle of repose tester / powder bulk density tester / bulk density meter factory dust / powder bulk density tester / Scott capacity meter / bulk density tester / Scott capacity meter Bulk Density Tester / powder Density Tester / vibration tap density tester / apparent density analyzer / Special Chemical apparent density analyzer / Plastic Profile Factory apparent density analyzer