Standard bulk density analyzer, tester, bulk density meter stainless steel

Standard bulk density analyzer, tester, bulk density meter stainless steel
 

Product description:

Brand: RICO Ricoeur Instrument Model: ft-103
  • Types of: other
Detailed description:
Type: Density Tester Scope: standard bulk density analyzer, tester, bulk density meter stainless steel
Repeatability error: 1 Samples can be measured state: standard bulk density analyzer, tester, bulk density meter stainless steel
Custom processing: Dimensions: 1 (mm)
Measuring range: standard bulk density analyzer, tester, bulk density meter stainless steel Type: Density Tester
Scope: standard bulk density analyzer, tester, bulk density meter stainless steel Repeatability error: 1
Samples can be measured state: standard bulk density analyzer, tester, bulk density meter stainless steel Custom processing:
Dimensions: 1 (mm) Measuring range: standard bulk density analyzer, tester, bulk density meter stainless steel

FT-106A powder bulk density tester

FT-106A powder bulk density tester standard requirements :

It is based on the international standard ISO9136-2: (E) (abrasives - Determination of bulk density - Part II: Powder) 1999 related to the technical requirements of development and production of special detection equipment.

FT-106A powder bulk density tester main pieces Instrument by the splice parts, vibration feed section, electrical control components.

FT-106A powder bulk density tester works The powder tested loading hopper, a bulk powder under its own role in the steady state. When the electromagnetic oscillator startup, powder under the action of electromagnetic vibration in specific ways and means of measuring flows into the bucket, will fall to Calibrating measuring cylinder of powder, Weigh Calibrating measuring cylinder soot mass in the balance, and then divided by the measurement cylinder volume, you can measure the bulk density of the test Powder

FT-106A powder bulk density tester Scope : Suitable for detecting manufacturing bonded abrasives and coated abrasives with powder bulk density, but also for the detection of diamond powder and bulk density of other fine powdery material, its detection methods and results and international common detection method has complete versatility.

FT-106A powder bulk density tester main technical parameters

Funnel Material: Stainless Steel;

Funnel Dimensions: Height 290mm; catchy diameter 190mm; spout inner diameter: 28mm; spout height: 38mm

Vibration slot Material: Stainless Steel

Vibration tank size: (210mm * 40mm * 30mm) ± 1mm

Measuring cylinder dimensions: diameter 64mm; inner height 62.2mm

Measuring cylinder V: (200 ± 0.5) cm3

Measurement error: ≤ ± 0.02g / cm3

Under funnel mouth diameter: 28mm; cylinder volume: 200ml; funnel spout height: 38mm; height of the drop measured powder: 140mm.

Ricoeur instrument company also offers related products : FT-106A powder bulk density tester; FT-106 ordinary abrasive The bulk density tester ;

FT-106B superhard material bulk density tester

FT-103A activated clay bulk density tester

GB 25571 Bulk density tester HGT2764 bulk density measuring device / industrial sodium peroxide bulk density measuring device

FT-103A activated clay bulk density measuring device Is based on national standards GB / T 25571-2010 national food safety standards, food additive provisions of activated clay design, production. The device is suitable for the determination of food additives, activated clay bulk density, while also meet HGT2764-2008 peroxide sodium carbonate industry industry standards for bulk density measuring device requirements.

FT-103A activated clay bulk density measuring device Principle: Dust from the funnel mouth full of free fall at a certain height measuring cup; quality measured within the measuring cup bulk state unit volume, namely bulk density.

FT-103A activated clay bulk density measuring device Structure: 2.1: funnel flow outlet diameter 30mm; funnel height: 135mm, funnel made of stainless steel, 2.2: cylinder diameter: 80mm, volume: 500ml

Ricoeur Instruments Inc. The company's products have the following eight series: Precision wire (Harness) Tester, harness (wire) conduction tester series; wire and cable tester with a full set of test equipment series; a full-power wire tester and test equipment series;; mechanical equipment and test equipment series; safety equipment series; retardant material testing equipment series; direct reading of solid / liquid density meter series; powder powder testing instrument series.

FT-103A activated clay bulk density tester Operation video link:

http: //www.tudou.com/ programs / view / f8Xt5vkBzyw /

FT-103 bulk density meter natural accumulation

FT-103 Natural bulk density meter stacking performance standards

It is based on national standards GB / T 16913.3-1997 provisions of design and production. The device is suitable for the determination of bulk density of dust.

Ricoeur instrument company also produces the following series : Powder flowability tester / Bulk Density Tester / Hall flow meter / tap density tester / Scott capacity meter bulk density tester / bulk density meter / aluminum powder Bulk Density Tester / angle of repose Tester / angle of repose tester / apparent density analyzer / tap density tester / aluminum fluoride (Alumina) Mobility analyzer

FT-103 bulk density meter natural accumulation Please refer to the sample collection GB / T 16913.1-1997 dust Physics Experiment Part 1: Dust samples collected in the relevant regulations.

FT-103 bulk density meter natural accumulation Principle: Dust from the funnel mouth full of free fall at a certain height measuring cup; mass per unit volume of dust inside the cup measured bulk state, that dust bulk density.

FT-103 bulk density meter natural accumulation Structure: funnel (flow outlet diameter 12.7mm)

Funnel made of stainless steel, which funnel taper of 60 ° ± 0.5

Ricoeur instrument prompts you: You may also use the following package of products : FT-103B dust repose angle measurement; FT-103 bulk density meter repose; FT-104B repose angle measurement

FT-103 bulk density meter natural accumulation operation of the video connection: http: //www.tudou.com/ programs / view / jkVHJC0CQKM /

FT-106 ordinary abrasive bulk density tester

FT-106 ordinary abrasive bulk density tester (Original DMP-II)

FT-106 ordinary abrasive bulk density tester According to international standard ISO9136: 1989 (Determination of bulk density coarse grains) and industry standard JB / T7984.2-1999 (Ordinary coarse grit abrasive Determination of bulk density) of the relevant technical requirements of development and production of special detection equipment, while meeting the GB / T20316.1-2009 bulk density tester requirements; suitable for detecting manufacturing bonded abrasives and coated abrasives coarse particles ordinary abrasive bulk density, but also for the detection of other granular materials Bulk density Its detection methods and results and generic detection methods internationally with full versatility.
FT-106 ordinary abrasive bulk density tester Technical Parameters

The main technical parameters

1.1 Funnel Material: Stainless Steel;

1.2 funnel Dimensions: Height 240mm; top diameter 160mm; outlet diameter: (20 ± 0.5) mm;

Catchy from the bottom of the funnel and measuring cylinder: (76 ± 1) mm measuring tube size: diameter 64mm; net height 62mm measuring cylinder volume: (200 ± 0.5) cm3 measurement error: ≤ ± 0.02g / cm3.
2.1 Measurement error: ≤ ± 0.02g / cm3.

2.2 measuring cylinder volume: 200 ± 0.5cm3.
2.3 Dimensions: 230mm (length) * 250mm (width) * 425mm (H)

FT-106 ordinary abrasive bulk density tester

Note: Specific parameters, please keep in touch with us, as well as related products.

FT-106 ordinary abrasive bulk density tester operation of the video connection:

http: //www.tudou.com/ programs / view / rIp5b3SclZs /

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder tester series

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester