Supply Ricoeur instrument FT-100C Jiangxi FT-100C | duplex tap density

Supply Ricoeur instrument FT-100C Jiangxi FT-100C | duplex tap density

Product description:

Brand: Ricoeur Instrument Model: FT-100C
Detailed description:

The company Jiangxi FT-100C Double-tap densitometer new products, quality assurance, welcome to consult the discussion.

FZS4-4 Economical tap density tester Test object
Various metal powders, and other rare metals powder, an alloy powder or metal oxide powder and the like.
Non-metallic powder: other powders: such as soil, dyes, pharmaceuticals, pesticides, abrasives, paints, food additives, catalysts, cement, sand and other rivers

There Related Products: FT-100B Practical Tap densitometer ; FZS4-4 Economical tap density tester; FT-100A Microcomputer Powder Density Tester

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder test solutions

FT-100A Tap density tester; FT-100B tap densitometer; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass; FT-103 bulk density tester; FT-103A activated clay bulk density measuring device;

FT-103B Dust analyzer angle of repose; FT-104 Alumina bulk density tester;

FT-104A Repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry Table View density measuring device; FT-105CASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 Bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary Abrasive bulk density tester; FT-107 Fertilizer bulk density (Loose) Tester

FT-100A Microcomputer Powder Density Tester , USP tap density meter

FT-100A Powder Density Tester Is consistent with USP (United States Pharmacopoeia), BP (British Pharmacopoeia) and EP (European Pharmacopoeia) Specification requirements and GB / T 5162-2006 / ISO3953: 1993 (metal powder tap density measurement), the instrument covers the national standard GB / T 5162-2006 / ISO3953: 1993 in the indicators ..

FT-100A Powder Density Tester By a variable speed motor, vibration components, micro and mini printers and other components. And the instrument with a compact, solid, simple operation, suitable for non-metallic powder, metal powder, pharmaceuticals, chemicals, batteries, abrasives as well as research and teaching and other fields, is the ideal instrument for powder industry tap density test. The basic working process of tap density tester is the powder cylinder fixed to the mechanical vibration device, vibration motor driven mechanical vibration device up and down vibration, graduated tube containing powder With the mechanical vibration device rhythmic vibration occurs, the vibration frequency increases, the cylinder where the powder gradually after the tap, vibration frequency reaches the set number of times, mechanical vibration device to stop the vibration, volume readout graduated tube, according to the density Definition: mass divided by volume, thereby obtaining powder tap density after.

FT-100A Powder Density Tester Technical Specifications:

1. Sample weight: ≤500.00 g;

2. Sample volume: ≤250.00 milliliter;

3. Single frequency vibration: 0 ~ 99999 Views (when set to 0 Times when the result is output as 'bulk density') ;

4. Allow the motor torque: 0.86 N.m;

5. Vibration frequency: 0 to 300 rev / min (adjustable);

6. Vibration amplitude: maximum 14mm, 1-14mm adjustable integer;

7. Repeatability error: ≤1%;

8. Accuracy error: ≤1%;

9. Input Power: AC 220V (50Hz / 60Hz), 40W.

10. Installation and use

Cylinder selection

FT-100A Microcomputer Powder Density Tester equipped 25ml , 50 ml , 100 ml , 250 ml Four different specifications of the cylinder (see annex). In order to improve the accuracy of testing, please be measured based on the weight of powder ( m ) And bulk density (ρ) Select the appropriate cylinder.

Cylinder volume ( cm3 )

Powder Weight (g)

Bulk density ( g / cm3 )


m 10.0

ρ≤ 0.8

10.0≤ m ≤20.0

0.8 ≤ρ≤2.0

20.0≤ m ≤50.0

2.0 ≤ρ≤7.0

50.0≤ m ≤100.0



10.0≤ m ≤20.0

ρ≤ 0.8

20.0≤ m ≤50.0

0.8 ≤ρ≤2.0

50.0≤ m ≤100.0

2.0 ≤ρ≤7.0


m 100.0


m 100.0



m 100.0

ρ≤ 1.0

NOTE: To improve the measurement accuracy, choose a small cylinder volume. .

Note: Specific parameters, please keep in touch with us, as well as related products.

Test Procedure samples

1. Clean the cylinder; 2. the dried sample; 3. Weighing and enter the sample weight; 4. All samples loaded into the cylinder;

5. Complete vibration; 6 reads and input volume; 7. Press 'Calculate' button to complete the calculation; 8. Print Results

There Related Products: FT-100B practical tap densitometer; FZS4-4 Cheap tap density tester; FT-100A Microcomputer Powder Density Tester, FT-104B angle of repose tester

Ricoeur Instrument Products: heap densitometer, bulk density meter, a tap density gauge, Scott capacity meter, Hall flow meter, bulk density meter, aluminum powder bulk density meter, analyzer angle of repose, repose corner, tap density tester, powder flowability tester, apparent density analyzer, aluminum fluoride (Alumina) Mobility analyzer, harness tester, conduction test machine, the voltage drop tester, DC low Resistance Tester