Supply Hall flow meter, bulk density meter, angle of repose, the powder flow properties analyzer

Supply Hall flow meter, bulk density meter, angle of repose, the powder flow properties analyzer

Product description:

Brand: Ricoeur Instrument Model: 102
Detailed description:

The company Hall flow meter, bulk density meter, angle of repose, powder resistance, quality assurance, welcome to consult the discussion.

FT-100B Practical Tap densitometer, Heap densitometer

FT-100B Practical Tap density tester Is based on GB T 5162-2006 / ISO3953 /: 1993 (Determination of metal powder tap density), and with reference to the United States Pharmacopoeia independent research and manufacture of the powder density test instruments, widely used in chemical, petroleum, pharmaceutical, battery manufacturing, high. molecular materials, powder metallurgy, powder powder, plastics, construction materials, and other related industries, production enterprises, research institutes and universities to provide the most complete product testing solutions. instrument covers the national standard GB / T 5162-2006 / ISO3953 : 1993 in various indicators in line with USP (United States Pharmacopoeia), BP (British Pharmacopoeia) and EP (European Pharmacopoeia) Specification requirements.

Ricoeur (Albert) instrument since its inception, after years of development, adhere to the interdisciplinary, cross-industry diversification, product technology high-end line of business, and always pay attention to the introduction and training of personnel, we are committed to domestic and international market development improve technological innovation and service quality, and maintain good relationships with many loyal customers in various industries, product quality acclaimed. RICO Ricoeur 'with the majority of customers were the progress of development.

1.1 FT-100B Practical Tap density tester By a variable speed motor, vibration components, and other components. And the instrument with a compact, solid, simple operation. Basic Features

u Accuracy: Automatic reservations 5 Significant digits after the decimal point may be accurate to 4 Bit.

1.2 Environmental requirements

u power supply: communicate with 200V ± 10% 50Hz , 35W .

u Relative humidity: Less than 85%, no condensation.

u Other requirements: Environmental clean no smoke, no mechanical vibration source or around sources of electromagnetic interference.

FT-100B Practical Tap density tester Technical Specifications:

1. Sample weight: ≤500.00 g;

2. Sample volume: ≤250.00 milliliter;

3. Single frequency vibration: 0 ~ 99999 Views (when set to 0 Times when the result is output as 'bulk density') ;

4. Allow the motor torque: 0.86 N.m;

5. Vibration frequency: 0 to 300 rev / min (adjustable);

6. Vibration amplitude: maximum 14mm, 1-14mm adjustable integer;

7. Repeatability error: ≤1%;

8. Accuracy error: ≤1%;

9. Input Power: AC 220V (50Hz / 60Hz), 40W.

FT-100B Practical Tap density tester Test object
Various metal powders: such as aluminum powder, zirconium powder, nickel powder, tungsten powder, tin powder, zinc powder, molybdenum powder, magnesium powder, copper powder and other precious metals, an alloy powder or metal oxide powder and the like.
Non-metallic powder: such as talc, kaolin, calcium carbonate, coal, phosphor, brucite, calcite, wollastonite, tourmaline, diamond, barite, fluorite, zeolite, boron carbide, clay, graphite, quartz, gypsum, bentonite, diatomaceous earth, zirconium silicate, alumina, mica, clay, and the like.
Other powders: such as soil, dyes, pharmaceuticals, pesticides, abrasives, paints, food additives, catalysts, cement, sand and other rivers.

Note: Specific parameters, please keep in touch with us, as well as related products.

. There Related Products: FT-100B Practical Tap densitometer ; FZS4-4 Economical tap density tester; FT-100A Microcomputer Powder Density Tester , FT-104B Angle of repose tester

FT-102B automatic powder flowability tester
I. Overview FT-102B automatic powder flowability tester is through advanced control technology, testing powder flow control system automatically time to reduce blockage caused by traditional manual way to test error and stopwatch timing error, so that test results closer The actual value of the product itself, to achieve more accurate test results on the powder trait analysis and product quality control, the ratio has a very good improvement, thereby reducing production costs.
Second, the product is widely used in the production, quality inspection by, research institutes and universities laboratories for materials analysis and measurement use.
Third, the instrument to meet the GB 1482-2010-T metal powder flowability measurement standard funnel (Hall flow meter) Instead of GB1479-84, GB1482-84 standard specification production with the design, production and its detection methods and results and international on a common detection method has versatility. This product is also suitable for measuring powder flowability and similar powder bulk density suitable for the determination of metal powder flowability using a standard funnel method. Where can freely flow through the aperture of 2.5mm standard funnel powder, can use this device.
Fourth, the technical parameters
1. funnel (export 2.5mm and 5.0mm each)
Funnel made of stainless steel or brass material, and has a sufficient thickness and hardness to prevent deformation and excessive wear.
2. bracket, bracket base and a graduated cylinder for receiving the fixed funnel. Base for mounting bracket and receiving cylinder, adjust the level, stable and vibration free. Stand height adjustment and fixed with the supplied wrench, funnel attached to the bracket. Reception cylinder (stainless steel plate) is placed on the base, to collect the powder.
3 balance (user-owned) the largest weighing 100g; precision 0.05g.
4. This device is equipped with a cup volume of 25ml stainless steel measuring cup. Users can complete the determination of metal powder bulk density (Funnel method) reference to the provisions of the national standard GB 1479-84.
5. The instrument consists of a control box electrical parts and test parts, automatically open the discharge port timing. After the sample outflow stop the clock.
6. This instrument can choose to configure the printer and software systems. Testing finished, automatically print out the test results
Ricoeur (Albert) Instrument Production tips, as well as associated products FT-102A vibration funnel bulk density tester, FT-100A tap density tester; FT-101 Scott capacity meter bulk density tester, FT -102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass