Vibratory Bulk Density Tester / magnetic oxide powder densitometer

Vibratory Bulk Density Tester / magnetic oxide powder densitometer
 

Product description:

Brand: RICO Ricoeur Model: FT-102A
  • Types of: other
Detailed description:
Type: Density Tester Scope: vibratory bulk density tester / magnetic oxide powder densitometer
Repeatability error: 11 Samples can be measured state: 11
Custom processing: Dimensions: 1 (mm)
Measuring range: 1 Type: Density Tester
Scope: vibratory bulk density tester / magnetic oxide powder densitometer Repeatability error: 11
Samples can be measured state: 11 Custom processing:
Dimensions: 1 (mm) Measuring range: 1

FT-102A vibration funnel Bulk Density Tester / Magnetic powder bulk density tester / vibration bulk densitometer / vibration funnel bulk density meter /

Vibratory Bulk Density Tester / Magnetic oxide powder densitometer / SJT 10215 Bulk Density Tester / ISO3923-3 metal powder bulk density meter / GB / T5061 vibration funnel bulk density meter

FT-102A vibration funnel bulk density tester: According to the standard : Determination of bulk density of SJT 10215-1991 magnetic oxide powder density measuring - Vibration funnel method and measured according to ISO 3923/3 using metal powder bulk density Part III: Vibration funnel method, to meet GB / T5061-1998 metal powder bulk density determination Part 3 Vibration funnel method;

FT-102A vibration funnel bulk density tester: Scope This standard applies not freely flow through the aperture for the determination of magnetic oxide powder bulk density of 5mm. Does not apply easily broken during vibration powder, such as needles and fibrous, while applicable to similar powder bulk density measurements.

FT-102A vibration funnel bulk density tester: Instrument principle The powder was loaded into a hopper vibration device, under specified conditions of vibration, so pink

End from the hopper by a certain height free fall, filled with a known volume of a cylindrical cup. In the bulk state, the mass per unit volume of the powder in order to represent

Bulk density powder

FT-102A vibration funnel bulk density tester: Technical parameters

1, Funnel aperture of 7.5 mm, on the surface from the bottom of the hole and the cylindrical funnel cup is 25mm.

2, the vibrator power frequency 50Hz, funnel horizontally vibrations.

3, cylindrical cylinder capacity of 25 persons 0 5cm. Funnel taper 60 °

4, the funnel and cylindrical cup made of brass, and should have a certain wall thickness and hardness

5, Yao Ping should have enough weighing range, and precision weighing with disabilities can achieve 0.05 g. (User-supplied)

FT-102A vibration funnel bulk density tester

FT-102A vibration funnel Bulk Density Tester / Magnetic powder bulk density tester / vibration bulk densitometer / vibration funnel bulk density meter /

Vibratory Bulk Density Tester / Magnetic oxide powder densitometer / SJT 10215 Bulk Density Tester / ISO3923-3 metal powder bulk density meter / GB / T5061 vibration funnel bulk density meter

FT-102A vibration funnel bulk density tester: According to the standard : Determination of bulk density of SJT 10215-1991 magnetic oxide powder density measuring - Vibration funnel method and measured according to ISO 3923/3 using metal powder bulk density Part III: Vibration funnel method, to meet GB / T5061-1998 metal powder bulk density determination Part 3 Vibration funnel method;

FT-102A vibration funnel bulk density tester: Scope This standard applies not freely flow through the aperture for the determination of magnetic oxide powder bulk density of 5mm. Does not apply easily broken during vibration powder, such as needles and fibrous, while applicable to similar powder bulk density measurements.

FT-102A vibration funnel bulk density tester: Instrument principle The powder was loaded into a hopper vibration device, under specified conditions of vibration, so pink

End from the hopper by a certain height free fall, filled with a known volume of a cylindrical cup. In the bulk state, the mass per unit volume of the powder in order to represent

Bulk density powder

FT-102A vibration funnel bulk density tester: Technical parameters

1, Funnel aperture of 7.5 mm, on the surface from the bottom of the hole and the cylindrical funnel cup is 25mm.

2, the vibrator power frequency 50Hz, funnel horizontally vibrations.

3, cylindrical cylinder capacity of 25 persons 0 5cm. Funnel taper 60 °

4, the funnel and cylindrical cup made of brass, and should have a certain wall thickness and hardness

5, Yao Ping should have enough weighing range, and precision weighing with disabilities can achieve 0.05 g. (User-supplied)

FT-102A vibration funnel bulk density tester

FT-102A vibration funnel Bulk Density Tester / Magnetic powder bulk density tester / vibration bulk densitometer / vibration funnel bulk density meter /

Vibratory Bulk Density Tester / Magnetic oxide powder densitometer / SJT 10215 Bulk Density Tester / ISO3923-3 metal powder bulk density meter / GB / T5061 vibration funnel bulk density meter

FT-102A vibration funnel bulk density tester: According to the standard : Determination of bulk density of SJT 10215-1991 magnetic oxide powder density measuring - Vibration funnel method and measured according to ISO 3923/3 using metal powder bulk density Part III: Vibration funnel method, to meet GB / T5061-1998 metal powder bulk density determination Part 3 Vibration funnel method;

FT-102A vibration funnel bulk density tester: Scope This standard applies not freely flow through the aperture for the determination of magnetic oxide powder bulk density of 5mm. Does not apply easily broken during vibration powder, such as needles and fibrous, while applicable to similar powder bulk density measurements.

FT-102A vibration funnel bulk density tester: Instrument principle The powder was loaded into a hopper vibration device, under specified conditions of vibration, so pink

End from the hopper by a certain height free fall, filled with a known volume of a cylindrical cup. In the bulk state, the mass per unit volume of the powder in order to represent

Bulk density powder

FT-102A vibration funnel bulk density tester: Technical parameters

1, Funnel aperture of 7.5 mm, on the surface from the bottom of the hole and the cylindrical funnel cup is 25mm.

2, the vibrator power frequency 50Hz, funnel horizontally vibrations.

3, cylindrical cylinder capacity of 25 persons 0 5cm. Funnel taper 60 °

4, the funnel and cylindrical cup made of brass, and should have a certain wall thickness and hardness

5, Yao Ping should have enough weighing range, and precision weighing with disabilities can achieve 0.05 g. (User-supplied)

FT-102A vibration funnel bulk density tester











FT-102A vibration funnel Bulk Density Tester / Magnetic powder bulk density tester / vibration bulk densitometer / vibration funnel bulk density meter /

Vibratory Bulk Density Tester / Magnetic oxide powder densitometer / SJT 10215 Bulk Density Tester / ISO3923-3 metal powder bulk density meter / GB / T5061 vibration funnel bulk density meter

FT-102A vibration funnel bulk density tester: According to the standard : Determination of bulk density of SJT 10215-1991 magnetic oxide powder density measuring - Vibration funnel method and measured according to ISO 3923/3 using metal powder bulk density Part III: Vibration funnel method, to meet GB / T5061-1998 metal powder bulk density determination Part 3 Vibration funnel method;

FT-102A vibration funnel bulk density tester: Scope This standard applies not freely flow through the aperture for the determination of magnetic oxide powder bulk density of 5mm. Does not apply easily broken during vibration powder, such as needles and fibrous, while applicable to similar powder bulk density measurements.

FT-102A vibration funnel bulk density tester: Instrument principle The powder was loaded into a hopper vibration device, under specified conditions of vibration, so pink

End from the hopper by a certain height free fall, filled with a known volume of a cylindrical cup. In the bulk state, the mass per unit volume of the powder in order to represent

Bulk density powder

FT-102A vibration funnel bulk density tester: Technical parameters

1, Funnel aperture of 7.5 mm, on the surface from the bottom of the hole and the cylindrical funnel cup is 25mm.

2, the vibrator power frequency 50Hz, funnel horizontally vibrations.

3, cylindrical cylinder capacity of 25 persons 0 5cm. Funnel taper 60 °

4, the funnel and cylindrical cup made of brass, and should have a certain wall thickness and hardness

5, Yao Ping should have enough weighing range, and precision weighing with disabilities can achieve 0.05 g. (User-supplied)

FT-102A vibration funnel bulk density tester

FT-102A vibration funnel Bulk Density Tester / Magnetic powder bulk density tester / vibration bulk densitometer / vibration funnel bulk density meter /

Vibratory Bulk Density Tester / Magnetic oxide powder densitometer / SJT 10215 Bulk Density Tester / ISO3923-3 metal powder bulk density meter / GB / T5061 vibration funnel bulk density meter

FT-102A vibration funnel bulk density tester: According to the standard : Determination of bulk density of SJT 10215-1991 magnetic oxide powder density measuring - Vibration funnel method and measured according to ISO 3923/3 using metal powder bulk density Part III: Vibration funnel method, to meet GB / T5061-1998 metal powder bulk density determination Part 3 Vibration funnel method;

FT-102A vibration funnel bulk density tester: Scope This standard applies not freely flow through the aperture for the determination of magnetic oxide powder bulk density of 5mm. Does not apply easily broken during vibration powder, such as needles and fibrous, while applicable to similar powder bulk density measurements.

FT-102A vibration funnel bulk density tester: Instrument principle The powder was loaded into a hopper vibration device, under specified conditions of vibration, so pink

End from the hopper by a certain height free fall, filled with a known volume of a cylindrical cup. In the bulk state, the mass per unit volume of the powder in order to represent

Bulk density powder

FT-102A vibration funnel bulk density tester: Technical parameters

1, Funnel aperture of 7.5 mm, on the surface from the bottom of the hole and the cylindrical funnel cup is 25mm.

2, the vibrator power frequency 50Hz, funnel horizontally vibrations.

3, cylindrical cylinder capacity of 25 persons 0 5cm. Funnel taper 60 °

4, the funnel and cylindrical cup made of brass, and should have a certain wall thickness and hardness

5, Yao Ping should have enough weighing range, and precision weighing with disabilities can achieve 0.05 g. (User-supplied)

FT-102A vibration funnel bulk density tester