[Measuring Instrument] - [Weighing & Measuring Apparatus] - [Other Weighing & Measuring Apparatus]

Supply FT-105D Plastic flow tester, PVC resin flow meter, flow measuring device

Supply FT-105D Plastic flow tester, PVC resin flow meter, flow measuring device
  • Supply FT-105D Plastic flow tester, PVC resin flow meter, flow measuring device
Product code: 20946200001
Unit price: 6000 CNY  (872.38 USD)
Price unit: Per piece
Minimum order:
Other info:
Visit my shop
Brand: Ricoeur Instrument Model: FT-105D
Detailed description:

FT-105D Plastic flow tester PVC Resin flow meter, flow measuring device

Scope: This standard specifies two methods, namely Method A and Method B. is to determine its liquidity outflow funnel of time by measuring the powder or granular A obtained by the process of plastic and processing performance-related information, and Method B It is designed for process control during manufacture and design, PVC resin

Standard: GB / T 21060-2007 (plastic flow measurement), equivalent to ISO 6186-1998 (plastic flow measurement) using

Measuring principle: In the sample out of a certain weight or volume of the required size of the funnel time used to represent

Technical Specifications:

1. Funnel: Funnel with convertible interfaces, stainless steel, polished inner wall; funnel outlet with control valve, funnel configuration grounding line, to eliminate static electricity on the test results.

2. The diameter of the funnel: 110mm; exit aperture were: 10 ± 0.05mm, height: 140mm; 15 ± 0.05mm, height: 133mm; 25 ± 0.05mm, height: 120mm in three sizes, angle of 40 degrees ;; according to the standard requirements if the test sample relatively poor liquidity, or do not completely flow stream does not move when the replacement is more to the caliber of the funnel test, and noted in the test report.

3. The instrument configuration test brackets used to support the stability of the funnel

The main components: base, bracket, export control valves, funnel, stopwatch, ruler, brush, manual, certificate, warranty card

FT-105D Plastic flow tester PVC Resin flow meter, flow measuring device

Scope: This standard specifies two methods, namely Method A and Method B. is to determine its liquidity outflow funnel of time by measuring the powder or granular A obtained by the process of plastic and processing performance-related information, and Method B It is designed for process control during manufacture and design, PVC resin

Standard: GB / T 21060-2007 (plastic flow measurement), equivalent to ISO 6186-1998 (plastic flow measurement) using

Measuring principle: In the sample out of a certain weight or volume of the required size of the funnel time used to represent

Technical Specifications:

1. Funnel: Funnel with convertible interfaces, stainless steel, polished inner wall; funnel outlet with control valve, funnel configuration grounding line, to eliminate static electricity on the test results.

2. The diameter of the funnel: 110mm; exit aperture were: 10 ± 0.05mm, height: 140mm; 15 ± 0.05mm, height: 133mm; 25 ± 0.05mm, height: 120mm in three sizes, angle of 40 degrees ;; according to the standard requirements if the test sample relatively poor liquidity, or do not completely flow stream does not move when the replacement is more to the caliber of the funnel test, and noted in the test report.

3. The instrument configuration test brackets used to support the stability of the funnel

The main components: base, bracket, export control valves, funnel, stopwatch, ruler, brush, manual, certificate, warranty card