[Measuring Instrument] - [Weighing & Measuring Apparatus] - [Other Weighing & Measuring Apparatus]

The apparent supply surfactants densitometer, apparent density gauge, density meter, surface density meter

The apparent supply surfactants densitometer, apparent density gauge, density meter, surface density meter
  • The apparent supply surfactants densitometer, apparent density gauge, density meter, surface density meter
Product code: 20945600001
Unit price: 1 CNY  (0.15 USD)
Price unit: Per piece
Minimum order:
Other info:
Visit my shop
Brand: Ricoeur Instrument Model: 105
  • Types of: other
Detailed description:

The company surfactant apparent densitometer, apparent densitometer, quality assurance, welcome to consult the discussion.

FT-105A Active agents apparent density measuring device

FT-105A Active agents apparent density measuring device Scope: for free-flowing powder or granular surfactant materials, can also be used to have a lump of surfactants, but these clumps should be easy to loose and particulate materials without being broken.

Comply with the standard: GB / T6373-2007 surfactant apparent density.

FT-105A Active agents apparent density measuring device Technical Parameters:

1, Funnel: it uses free-flowing powder under a pore diameter of 40mm funnel; when a lump of powder should be used for the next funnel aperture: 60mm funnel.

2, the receiving cylinder: cylinder volume: 500mL

3, the bracket: a stationary funnel; backplane pin cylinder positioned only

4, the cutoff plate: 110 * 70mm; 5, ruler: 150mm; 6, stainless steel pipe

7, Material: stainless steel 8 Dimensions 250 * 250 * 320mm

test methods ;

5.1 The funnel is placed on the cradle, weighed by the device (that feed cylinder container) placed in a fixed position. Cutoff plate covered with a funnel at the discharge port, snapping funnel, and Hold the cut-off board, test sample into the funnel until the top of the funnel and then quickly removed off the plate, the sample flows into the funnel and overflow by container.

5.2 Remove the container, placed on a platform above the sample using a ruler to the plane Calibrating powder container. Use a dry cloth wiped clean and the outer wall of the container and the weighing accuracy 0.1g

5.3. Each sample sampling twice (in different locations)

6 calculation method, according to the standard requirements for assessment!

FT-105B The slurry was apparent density measuring device

FT-105B The slurry was apparent density measuring device Comply with the standard: Determination method GB / T6373-2007 Determination of apparent density, paste, paste or similar state surfactant product filling the apparent density, product specific parameters in accordance with standard production.

FT-105B The slurry was apparent density measuring device

FT-105 Apparent density analyzer

FT-105 Apparent density analyzer The instrument is mainly used to set aside provisions funnel Determination of apparent density of plastic bulk material, measured apparent density for PVC resin

FT-105 Apparent density analyzer The chemical industry as well as plastic profile factory quality inspection of raw materials into the plant ideal testing equipment. Products comply with GB / T3402, GB / T1636 and other standards.
FT-105 Apparent density analyzer Technical Parameters:

The main components: base, cage, funnel, flapper, by the barrel
By the cylinder volume: 100ml ± 0.5ml
Sample volume: 110ml-120ml
Funnel angle: 40 degrees, a pore diameter of 8mm

To meet K-6721 (1966) of the requirements

The instrument is mainly used for determination of apparent density plastic outflow of bulk material from a predetermined funnel, is the chemical industry as well as plastic profile factory quality testing of raw materials into the plant ideal testing equipment. Products comply with GB / T3402, GB / T1636 GB / T20022 -2005 GB / T13173-2008 and 1636-79 standards.
Apparent density analyzer

This method is suitable for measuring the apparent density of the powder molding compound, the mass per unit volume for molding plastic packaging, mold cavity and extrusion screw design provides parameters in line with GB / T 3402, GB 1636 standards.

Apparent density analyzer

1, Sample: extracting a sample standard product requirements.

2, the test instrument:

(1) balance: a sense of the amount of 0.1 g

(2) surface view tester

(3) The cylinder-type cup: 100 ml

Note: Specific parameters, please keep in touch with us, as well as related products.

Configuration: ruler; brush, base, cage, funnel, flapper, by the barrel, manual, certificate, warranty card and so on.

Ricoeur Instruments powder powder test can also provide relevant solutions

1, the operation method

a, open the box, remove the meter, according to the packing list inventory components.

b, the detector is placed on a stable work surface.

c, with flapper Chazhu stainless steel lower funnel outlet and put away by the funnel below feeders, coaxial with the funnel.

d, with a graduated cylinder to take samples 110ML-120ML, slowly into the funnel.

e, quickly removing card, allow the sample to leave out all the natural (by feeder filled with sample shall be subjected to vibration).

f, on the feeder with a ruler scrape off excess sample by mouth, then placed on the drug weighing scales, accurate to 0.2g (measured sample may not duplicate assay).

Plastic heap densitometer

FT-105CASTM D1895 Plastic apparent densitometer

FT-105CASTM Plastic apparent densitometer ASTM D1895 Apparent Density Tester

Standard: according to ASTM D1895 03 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials 1 ; Apparatus for Apparent Density Test, Method A and B Production.

FT-105CASTM D1895 Plastic apparent densitometer Technical Parameters