The bulk density meter | heap densitometer | powder bulk density of natural meter | hydrometer

The bulk density meter | heap densitometer | powder bulk density of natural meter | hydrometer
 

Product description:

  • Types of: other
Detailed description:
Natural powder bulk density meter: Natural powder bulk density meter Scope: bulk density meter heap densitometer powder bulk density meter natural
Natural powder bulk density meter: Scope:

The bulk density meter heap densitometer natural powder bulk density meter bulk density of powder bulk density of dust analyzer

FT-103 bulk density tester

FT-103 bulk density tester It is based on national standards GB / T 16913.3-1997 provisions of design and production. The device is suitable for the determination of bulk density of dust.

FT-103 bulk density tester Please refer to the sample collection GB / T 16913.1-1997 dust Physics Experiment Part 1: Dust samples collected in the relevant regulations.

FT-103 bulk density tester Principle: Dust from the funnel mouth full of free fall at a certain height measuring cup; mass per unit volume of dust inside the cup measured bulk state, that dust bulk density.

FT-103 bulk density tester Structure: funnel (flow outlet diameter 12.7mm)

Funnel made of stainless steel, which funnel taper of 60 ° ± 0.5

FT-103A activated clay bulk density tester

GB 25571 Bulk density tester HGT2764 bulk density measuring device / industrial sodium peroxide bulk density measuring device

FT-103A activated clay bulk density measuring device Is based on national standards GB / T 25571-2010 national food safety standards, food additive provisions of activated clay design, production. The device is suitable for the determination of food additives, activated clay bulk density, while also meet HGT2764-2008 peroxide sodium carbonate industry industry standards for bulk density measuring device requirements.

FT-103A activated clay bulk density measuring device Principle: Dust from the funnel mouth full of free fall at a certain height measuring cup; quality measured within the measuring cup bulk state unit volume, namely bulk density.

FT-103A activated clay bulk density measuring device Structure: 2.1: funnel flow outlet diameter 30mm; funnel height: 135mm, funnel made of stainless steel, 2.2: cylinder diameter: 80mm, volume: 500ml

FT-106 ordinary abrasive bulk density tester (Original DMP-II)

FT-106 ordinary abrasive bulk density tester According to international standard ISO9136: 1989 (Determination of bulk density coarse grains) and industry standard JB / T7984.2-1999 (Ordinary coarse grit abrasive Determination of bulk density) of the relevant technical requirements of development and production of special detection equipment, while meeting the GB / T20316.1-2009 bulk density tester requirements; suitable for detecting manufacturing bonded abrasives and coated abrasives coarse particles ordinary abrasive bulk density, but also for the detection of other granular materials Bulk density Its detection methods and results and generic detection methods internationally with full versatility.
FT-106 ordinary abrasive bulk density tester The main technical parameters
2.1 Measurement error: ≤ ± 0.02g / cm3.
2.2 measuring cylinder volume: 200 ± 0.5cm3.
2.3 Dimensions: 230mm (length) * 250mm (width) * 425mm (H)

FT-106 ordinary abrasive bulk density tester

Note: Specific parameters, please keep in touch with us, as well as related products.

FT-106A powder bulk density tester It is based on the international standard ISO9136-2: (E) (abrasives - Determination of bulk density - Part II: Powder) 1999 related to the technical requirements of development and production of special detection equipment.

FT-106A powder bulk density tester Scope: suitable for detecting manufacturing bonded abrasives and coated abrasives with powder bulk density, but also for the detection of diamond powder and bulk density of other fine powdery material, its detection methods and results and generic detection methods internationally have. complete versatility.

FT-106A powder bulk density tester The main technical parameters: funnel under the port diameter: 28mm ; Cylinder volume: 200ml; Funnel spout height: 38mm ; Height of the drop measured powder: 140mm.

FT-106B superhard material bulk density tester Based on industry standards JB / T3584-1999 (( Superhard abrasive bulk density measurement method ) ) Develop

The company also produces sells the following related products :

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment
FT-104 alumina bulk density tester; FT-104A alumina repose angle measurement
FT-104B repose angle measurement; FT-105 Apparent density analyzer
FT-105A active agents apparent density measuring device; FT-105B slurry was apparent density measuring device
FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester FT-102A vibration funnel bulk density tester

The bulk density meter heap densitometer natural powder bulk density meter bulk density of powder bulk density of dust analyzer

Ningbo Haishu Ricoeur Instrument Technology Co., Ltd.

(Referred to as 'Ricoeur instrument' English: Ningbo Rlco instrument technology Co., LTD)

Founded in 1999, the Department of Rlco instrument group (Ricoeur Instruments Incorporated) member companies engaged in testing instruments and testing equipment research and development, production and sales in the Chinese mainland for the integration of the Industrial Company. Manufacturing plant set up in Dongguan, Guangdong Huang Town, company There's 'Xinke instrument' 'Ricoeur instrument' II big trademark, the products meet the requirements of international standards of IEC, CCC, UL, CSA, VDE, JIS, KS, SEV, BSI, HD, KEMA, SSA and the like.

Companies' quality-oriented 'service first' operating principles. Meet the needs of our customers. Companies in the 'science and technology, creativity, innovation, progressive' entrepreneurial spirit, the introduction of advanced production equipment and manufacturing process, through continuous technology to improve and perfect the management, strive to provide customers the best quality products and service!

The company's products have the following eight series: Precision wire (Harness) Tester, harness (wire) conduction tester series; wire and cable tester with a full set of test equipment series; a full-power wire tester and test equipment series; ; mechanical equipment and test equipment series; safety equipment series; retardant material testing equipment series; direct reading of solid / liquid density meter series; powder powder testing instrument series.

Product is suitable for wire harness processing industry, wire and cable, household appliances, plastics, rubber, powder powder, metal, shoes, and other downstream manufacturing and related industries to provide the most professional testing instruments and testing equipment for manufacturing companies to provide the most complete product testing solutions and technical advice.

Since its inception, after years of development, adhere to the interdisciplinary, cross-industry diversification, product technology high-end line of business, and always pay attention to the introduction and training of personnel, we are committed to domestic and international market development, and improve technology innovation and service quality, with many loyal customers to maintain good relations in various industries, product quality and widely acclaimed. Xinke instrument '' Ricoeur instrument 'will work with our customers to a total of the progress of development.

The bulk density meter heap densitometer natural powder bulk density meter bulk density of powder bulk density of dust analyzer