FT-104 alumina bulk density tester, aluminum fluoride bulk density meter, bulk density operation

FT-104 alumina bulk density tester, aluminum fluoride bulk density meter, bulk density operation
 

Product description:

  • Types of: other
Detailed description:
Weight: 1 (kg) The scope of products: FT-104 alumina bulk density tester aluminum fluoride Bulk Density Tester bulk density
Power: 1 Operating voltage: 1 (V)
Custom processing: Dimensions: 1
Measuring range: FT-104 alumina bulk density tester, aluminum fluoride bulk density meter, bulk density operation weight:
Products Scope: power supply:
Operating Voltage: Custom processing:
Dimensions: Measuring range:

FT-104B angle of repose tester

FT-104B repose angle measurement is based on GB11986-89 (measured surfactant powder and granules angle of repose) provides design requirements while meeting the ISO4324-1977; powders and granules measuring the angle of repose, is widely used in pharmaceutical, industrial detecting chemical powder, washing, research institutions, quality inspection agency, etc. related to the powder and the particulate material; powder storage can provide changes in nature, especially in the case of storage silos, etc. The instrument is suitable for non-mass powder. Conventional measuring the angle of repose or granular surfactant and detergent can also be used to measure the angle of repose of a similar nature in other powders and granules. material flow under specified conditions to obtain base angle is called a cone of repose angle
Disc: diameter 10MM
Funnel: diameter 155mm inner diameter of 145mm

FT-104A repose angle measurement

(Alumina chemical analysis methods and determination of physical performance: Determination of repose angle) in accordance with national standards GB / T6609.24-2004 designed and manufactured for measuring the angle of repose of the powder under natural flow conditions meet GBT 16913-2008 dust physics. Test methods and GB / T 18702-2002 coal repose angle measuring method is also applicable to other products repose angle measurement, the measuring method is similar to the international phase.

Stainless steel funnel: The inner diameter of 74mm, 6mm inside diameter of the feed opening

Weight: about 16kg

FT-103B dust analyzer angle of repose

First, the standard requirements: GBT 16913-2008 dust dust physical test methods repose angle measurement (injection limited underside of law)

Second, the principle:

Sufficient overflowing trays dust injected from the mouth of the funnel to the horizontal feed tray; measure dust accumulation and the bottom horizontal bevel sandwiched acute angle, that dust angle of repose.

Third, the test requirements and procedures: the angle of repose of dust injection means defining a bottom surface measuring method, should be placed on the test stand; funnel plugged with a stopper spout would like dust sample loading cylinder filled with a blade Calibrating after Pour stopper out of the funnel, so that dust from the funnel orifice outflow; for bad fluidity dust, dust can make knitting stir continuously living on trays until all the dust out of the rotation protractor to measure out on trays. dust cone bus sandwiched acute angle with the horizontal plane, that angle of repose, and the records shall be continuously measured 3 times to 5 times, find the arithmetic mean and standard deviation a A

Fourth, the technical parameters:

1 Funnel taper 60 °±0.5°;

2, the outflow diameter 5mm, funnel and the lower center tray center should be on a vertical line;

3, along with the disk bottom spout distance 80mm 2 mm, protractor 7.5cm ~ 10 cm;

4, material disc diameter 80 mm, volume 100 ml graduated cylinder;

5, straight blade-like dust, knitting;

FT-104B angle of repose tester / no lumps powder repose angle measuring instrument / angle of repose of granular surfactant / detergent angle of repose tester / surfactant repose angle / angle of repose tester powder / particle analyzer angle of repose / GB11986 angle of repose tester

FT-104 alumina bulk density tester

First, based on (measured alumina chemical analysis methods and determination of physical performance bulk density) in line with GB / T 6609.25-2004 technical specifications. Determination of alumina chemical analysis methods and determination of physical performance bulk density Part 25, the second . FT-104 alumina bulk density tester Technical Parameters:

1. Funnel: mouth diameter 100mm, taper 60º, within the discharge port by 6mm.

2. cylinder: about 200ml, the inner diameter of the inner high ratio of 1: 6, the base outer diameter of 70mm

3; Material: Stainless steel

FT-104C aluminum fluoride mobility analyzer

YS / T 581.17-2010 Methods for chemical analysis of aluminum fluoride and determination of physical performance - Part 17: Determination of flow

This standard specifies the method for measuring the flow of aluminum fluoride, that a certain quality of aluminum fluoride through a special funnel, funnel flow time measurement sample all needed.

Funnel: stainless steel outer diameter of the funnel catchy 138.5mm, an inner diameter of 123mm, outlet diameter is 3.95mm ~ 4.0mm, the total height of 190.5mm wear resistant stainless steel catchy taper:. 60 °, the feed opening taper 15 °.

Angle of repose of aluminum fluoride measurement device

Angle of repose measuring device Mainly includes the following components:

1, stainless steel funnel: Neijing 74mm, inside through between the feed opening 6mm, two steps of aperture plate fitted with a sieve of 1mm This funnel is fastened to the bracket.

2, galvanized steel plate: material made of steel or marble, stainless steel and other corrosion-resistant base plate is made, the minimum size of: Width 200mm, length 270mm, 18mm thick plating on the polished floor of the four cross engraved on the surface 45. Angle straight. right in the center section of the funnel has a fixed height gauge positioning pin, the bottom plate below 3 adjustable horizontal feet.

3, Funnel Holder: composed of stainless steel, its structure should be perpendicular to the centerline of the fastening funnel centering pin.

4, height gauge (determine the height of the metal cylinder): It is a cylinder surface finish made of stainless steel, high 40mm, the bottom has a recess so that the center of the bottom plate with the locating pin convergence.

Aluminum fluoride bulk density measuring device

Bulk density measuring device , Including the following sections:

1, Funnel: upper inlet diameter 100mm, taper 60 °, neck length 8mm, brought in under the spout inside by 6mm.

2, cylindrical containers: volume of about 200mL, Nei Jing and about 1 in the high ratio: 6, the inner bottom is flat.

3, the annular funnel rack: There are pillars in the bottom stage of sturdy funnel annular mounting frame, long screws fixed to the pillars of the ring frame, and can be freely adjusted.

The funnel installed in the cylindrical container above the predetermined level surface.

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder tester series

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester

Powder flowability tester / Bulk Density Tester / Hall flow meter / tap density tester / Scott capacity meter bulk density tester / bulk density Tester / aluminum powder Bulk Density Tester / measuring angle of repose instrument / angle of repose tester / apparent density analyzer / tap density tester / vibration funnel bulk density tester

Ningbo Haishu Ricoeur Instrument Co., Ltd. Ningbo Haishu United Xin Electronic Technology Co., Ltd. Major production and marketing: Harness (Wire) Tester harness tester, wire (Harness) conduction testing machine, power cord tester, plug wire tester, plug wire conduction tester, solid and liquid. hydrometer / density tester, plug wire tester, plug temperature tester. terminal voltage drop detector, harness the voltage drop tester, plug wire voltage drop tester, plug socket life load test machine, drum drop test machine , wire and wire elongation testing machine, bending swing test machine, wire Flexing testing machine, wire spark tester, wire horizontal and vertical burning test machine, cable vertical burning test machine, automotive wire burning test machine, wire fire test machine, Mine fire-retardant cable tester, automotive interior burning tester 15J measuring microscope, QJ57 DC arms bridge DC low resistance conductor resistance tester jig, dumbbells knife cutter, wire wear testing machine, wire and cable chipper, Cables die chipper, tensile testing machine, cable printing wear testing machine, specimen cutting machine punching machine / specimen polished machine, constant temperature water bath, thermal expansion test equipment, high temperature pressure test equipment, resistance to cracking winding ( thermal shock) test equipment, ball pressure test equipment, cable cross-section projectors, flexible wires chilling chamber, temperature chamber, low temperature impact test equipment, test equipment winding temperature, low temperature tensile tester, temperature and humidity chamber , heated fuel tank, natural ventilation aging chamber, air ventilation aging chamber, oven, oxygen bomb (air bombs) aging test, ozone aging chamber, high and low temperature test chamber, salt spray chamber to simulate transport test stand, plug Dial force testing machine, low resistance tester, insulation resistance tester, pressure tester, automotive interior combustion test machine, FL4-1 metal powder flowability tester / Bulk Density Tester / Hall flow meter / liquidity and bulk density measuring device / Hall flow meter / bulk density meter / powder fluidity and appearance Density Tester / powder flowability and bulk density measuring device measuring bulk density / bulk density meter / bulk density tester / activated clay bulk density tester / ordinary abrasive bulk density tester quotes / particle packing density analyzer / GB 25571 Bulk density analyzer / GB / T 16913 bulk density measuring instrument / angle of repose tester / powder bulk density tester / The bulk density meter factory dust / powder bulk density tester / Scott capacity meter / bulk density tester / Scott capacity meter Bulk Density Tester / powder Density Tester / tap density tester / apparent density analyzer / Special Chemical apparent density analyzer / Plastic Profile Factory apparent density analyzer Categories: 1. Wire and cable testers and testing equipment; 2. The power wire tester and test equipment; 3. Wire (Harness ) conduction tester; 8. Safety test equipment; 4. Materials resistant to combustion / flame test equipment; 5. solid hydrometer / density meter; 6. Powder Powder test equipment; 7. The terminal connectors test equipment; 9. Rubber industry testing equipment 10. Polystyrene powder metallurgy testing equipment; 11. lamps testing equipment, is a professional testing equipment and test equipment development, production and sales for the integration of the Industrial Company, the company's current business. mainly related to wire (Harness) Processing, home appliances and accessories, hardware, electronics, wire and cable, plugs, sockets, switches, chemical, metallurgy, powder powder, textiles, plastics, construction materials and other related industries, ten series of products Contact Zeng Sheng Phone: 15088416993

Instrument Co., Ltd. Ningbo Haishu Ricoeur

(Referred to as 'Ricoeur instrument' English: Ningbo Rlco instrument Co., LTD)

Began in 1999, the Department of Ricoeur instrument enterprise systems; Ricoeur instrument enterprise system is mainly engaged in precision testing equipment and advanced detection equipment research and development, production and sales for the integration of the Industrial Company to set up manufacturing facilities in Dongguan, Guangdong Huang Town, the company's. There 'Xinke instrument' 'Ricoeur instrument' II big trademark, the products meet the requirements of international standards of IEC, CCC, UL, CSA, VDE, JIS, KS, SEV, BSI, HD, KEMA, SSA and the like.

Companies' quality-oriented 'service first' operating principles. Meet the needs of our customers. Companies in the 'science and technology, creativity, innovation, progressive' entrepreneurial spirit, the introduction of advanced production equipment and manufacturing process, through continuous technology to improve and perfect the management, strive to provide customers the best quality products and service!

The company's products have the following eight series: Precision wire (Harness) Tester, harness (wire) conduction tester series; wire and cable tester with a full set of test equipment series; a full-power wire tester and test equipment series; ; mechanical equipment and test equipment series; safety equipment series; retardant material testing equipment series; direct reading of solid / liquid density meter series; powder powder testing instrument series.

Product is suitable for wire harness processing industry, wire and cable, household appliances, plastics, rubber, powder powder, metal, shoes, and other downstream manufacturing and related industries to provide the most professional testing instruments and testing equipment for manufacturing companies to provide the most complete product testing solutions and technical advice.

Since its inception, after years of development, adhere to the interdisciplinary, cross-industry diversification, product technology high-end line of business, and always pay attention to the introduction and training of personnel, we are committed to domestic and international market development and improve technological innovation and service quality, with many loyal customers to maintain good relations in various industries, product quality and widely acclaimed. Xinke instrument '' Ricoeur instrument 'will work with our customers to a total of the progress of development. Ricoeur instrument enterprise systems affiliated with Ningbo Haishu United Xin Electronic Technology Co., Ltd. Ningbo Haishu Ricoeur instruments and other related businesses.









FT-104B angle of repose tester

FT-104B repose angle measurement is based on GB11986-89 (measured surfactant powder and granules angle of repose) provides design requirements while meeting the ISO4324-1977; powders and granules measuring the angle of repose, is widely used in pharmaceutical, industrial detecting chemical powder, washing, research institutions, quality inspection agency, etc. related to the powder and the particulate material; powder storage can provide changes in nature, especially in the case of storage silos, etc. The instrument is suitable for non-mass powder. Conventional measuring the angle of repose or granular surfactant and detergent can also be used to measure the angle of repose of a similar nature in other powders and granules. material flow under specified conditions to obtain base angle is called a cone of repose angle
Disc: diameter 10MM
Funnel: diameter 155mm inner diameter of 145mm

FT-104A repose angle measurement

(Alumina chemical analysis methods and determination of physical performance: Determination of repose angle) in accordance with national standards GB / T6609.24-2004 designed and manufactured for measuring the angle of repose of the powder under natural flow conditions meet GBT 16913-2008 dust physics. Test methods and GB / T 18702-2002 coal repose angle measuring method is also applicable to other products repose angle measurement, the measuring method is similar to the international phase.

Stainless steel funnel: The inner diameter of 74mm, 6mm inside diameter of the feed opening

Weight: about 16kg

FT-103B dust analyzer angle of repose

First, the standard requirements: GBT 16913-2008 dust dust physical test methods repose angle measurement (injection limited underside of law)

Second, the principle:

Sufficient overflowing trays dust injected from the mouth of the funnel to the horizontal feed tray; measure dust accumulation and the bottom horizontal bevel sandwiched acute angle, that dust angle of repose.

Third, the test requirements and procedures: the angle of repose of dust injection means defining a bottom surface measuring method, should be placed on the test stand; funnel plugged with a stopper spout would like dust sample loading cylinder filled with a blade Calibrating after Pour stopper out of the funnel, so that dust from the funnel orifice outflow; for bad fluidity dust, dust can make knitting stir continuously living on trays until all the dust out of the rotation protractor to measure out on trays. dust cone bus sandwiched acute angle with the horizontal plane, that angle of repose, and the records shall be continuously measured 3 times to 5 times, find the arithmetic mean and standard deviation a A

Fourth, the technical parameters:

1 Funnel taper 60 °±0.5°;

2, the outflow diameter 5mm, funnel and the lower center tray center should be on a vertical line;

3, along with the disk bottom spout distance 80mm 2 mm, protractor 7.5cm ~ 10 cm;

4, material disc diameter 80 mm, volume 100 ml graduated cylinder;

5, straight blade-like dust, knitting;

FT-104B angle of repose tester / no lumps powder repose angle measuring instrument / angle of repose of granular surfactant / detergent angle of repose tester / surfactant repose angle / angle of repose tester powder / particle analyzer angle of repose / GB11986 angle of repose tester

FT-104 alumina bulk density tester

First, based on (measured alumina chemical analysis methods and determination of physical performance bulk density) in line with GB / T 6609.25-2004 technical specifications. Determination of alumina chemical analysis methods and determination of physical performance bulk density Part 25, the second . FT-104 alumina bulk density tester Technical Parameters:

1. Funnel: mouth diameter 100mm, taper 60º, within the discharge port by 6mm.

2. cylinder: about 200ml, the inner diameter of the inner high ratio of 1: 6, the base outer diameter of 70mm

3; Material: Stainless steel

FT-104C aluminum fluoride mobility analyzer

YS / T 581.17-2010 Methods for chemical analysis of aluminum fluoride and determination of physical performance - Part 17: Determination of flow

This standard specifies the method for measuring the flow of aluminum fluoride, that a certain quality of aluminum fluoride through a special funnel, funnel flow time measurement sample all needed.

Funnel: stainless steel outer diameter of the funnel catchy 138.5mm, an inner diameter of 123mm, outlet diameter is 3.95mm ~ 4.0mm, the total height of 190.5mm wear resistant stainless steel catchy taper:. 60 °, the feed opening taper 15 °.

Angle of repose of aluminum fluoride measurement device

Angle of repose measuring device Mainly includes the following components:

1, stainless steel funnel: Neijing 74mm, inside through between the feed opening 6mm, two steps of aperture plate fitted with a sieve of 1mm This funnel is fastened to the bracket.

2, galvanized steel plate: material made of steel or marble, stainless steel and other corrosion-resistant base plate is made, the minimum size of: Width 200mm, length 270mm, 18mm thick plating on the polished floor of the four cross engraved on the surface 45. Angle straight. right in the center section of the funnel has a fixed height gauge positioning pin, the bottom plate below 3 adjustable horizontal feet.

3, Funnel Holder: composed of stainless steel, its structure should be perpendicular to the centerline of the fastening funnel centering pin.

4, height gauge (determine the height of the metal cylinder): It is a cylinder surface finish made of stainless steel, high 40mm, the bottom has a recess so that the center of the bottom plate with the locating pin convergence.

Aluminum fluoride bulk density measuring device

Bulk density measuring device , Including the following sections:

1, Funnel: upper inlet diameter 100mm, taper 60 °, neck length 8mm, brought in under the spout inside by 6mm.

2, cylindrical containers: volume of about 200mL, Nei Jing and about 1 in the high ratio: 6, the inner bottom is flat.

3, the annular funnel rack: There are pillars in the bottom stage of sturdy funnel annular mounting frame, long screws fixed to the pillars of the ring frame, and can be freely adjusted.

The funnel installed in the cylindrical container above the predetermined level surface.

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder tester series

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester