The company FZS4-4 tap density tester, FZS4-4B tap, quality assurance, welcome to consult the discussion.
FZS4-4 Economical tap density tester
FZS4-4 Economical tap density tester (Original FZS4-4B)
FZS4-4 Economical tap density tester Production requirements of the instrumentation system according to international standard ISO3953 requirements of production, GB T 5162-2006 (determination of metal powder tap density) / satisfied, and with reference to the United States Pharmacopoeia independent research and manufacture of the powder density test instruments for measuring vibration powder real density consistent with USP (United States Pharmacopoeia), BP (British Pharmacopoeia) and EP (European Pharmacopoeia) Specification requirements, the powder through the tap, its density increases the percentage is a comprehensive reflection of the powder variety of performance. The instrument is by using a rotating eccentric slide up and down to make directional slider, percussion drill seat, the inner cylinder powder gradually tap means, mainly used for the determination of various shapes powder tap density, non-metallic powder can also be learn to use.
FZS4-4 Economical tap density tester Technical Parameters
Vibration stroke tap apparatus 3 ± 0.1mm
Vibration frequency 250 ± 15 beats per minute
Glass cylinder volume is 100 ± 1.0ml, graduated some high 175 ± 10mm. Glass cylinder volume of 25 ± 0.5ml scale section of a high 135 ± 7mm. 100ml graduated cylinder volume between the smallest scale is 1ml, measurement accuracy of ± 0.5cm ; cylinder between 25cm minimum scale volume of 0.2cm, measurement accuracy of ± 0.1cm
There Related Products: FT-100B Practical Tap densitometer ; FZS4-4 Economical tap density tester; FT-100A Microcomputer Powder Density Tester , FT-104B Angle of repose tester
FZS4-4 Economical tap density tester Test object
Various metal powders, and other rare metals powder, an alloy powder or metal oxide powder and the like.
Non-metallic powder: other powders: such as soil, dyes, pharmaceuticals, pesticides, abrasives, paints, food additives, catalysts, cement, sand and other rivers
There Related Products: FT-100B Practical Tap densitometer ; FZS4-4 Economical tap density tester; FT-100A Microcomputer Powder Density Tester
Ricoeur instrument tips: You may be interested in the following products:
Common powder powder test solutions
FT-100A Tap density tester; FT-100B tap densitometer; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass; FT-103 bulk density tester; FT-103A activated clay bulk density measuring device;
FT-103B Dust analyzer angle of repose; FT-104 Alumina bulk density tester;
FT-104A Repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry Table View density measuring device; FT-105CASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester
FZ4-3 Bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester
DMP-II ordinary Abrasive bulk density tester; FT-107 Fertilizer bulk density (Loose) Tester
FT-100A Microcomputer Powder Density Tester , USP tap density meter
FT-100A Powder Density Tester Is consistent with USP (United States Pharmacopoeia), BP (British Pharmacopoeia) and EP (European Pharmacopoeia) Specification requirements and GB / T 5162-2006 / ISO3953: 1993 (metal powder tap density measurement), the instrument covers the national standard GB / T 5162-2006 / ISO3953: 1993 in the indicators ..
FT-100A Powder Density Tester By a variable speed motor, vibration components, micro and mini printers and other components. And the instrument with a compact, solid, simple operation, suitable for non-metallic powder, metal powder, pharmaceuticals, chemicals, batteries, abrasives as well as research and teaching and other fields, is the ideal instrument for powder industry tap density test. The basic working process of tap density tester is the powder cylinder fixed to the mechanical vibration device, vibration motor driven mechanical vibration device up and down vibration, graduated tube containing powder With the mechanical vibration device rhythmic vibration occurs, the vibration frequency increases, the cylinder where the powder gradually after the tap, vibration frequency reaches the set number of times, mechanical vibration device to stop the vibration, volume readout graduated tube, according to the density Definition: mass divided by volume, thereby obtaining powder tap density after.
FT-100A Powder Density Tester Technical Specifications:
1. Sample weight: ≤500.00 g;
2. Sample volume: ≤250.00 milliliter;
3. Single frequency vibration: 0 ~ 99999 Views (when set to 0 Times when the result is output as 'bulk density') ;
4. Allow the motor torque: 0.86 N.m;
5. Vibration frequency: 0 to 300 rev / min (adjustable);
6. Vibration amplitude: maximum 14mm, 1-14mm adjustable integer;
7. Repeatability error: ≤1%;
8. Accuracy error: ≤1%;
9. Input Power: AC 220V (50Hz / 60Hz), 40W.
10. Installation and use
FT-100A Microcomputer Powder Density Tester equipped 25ml , 50 ml , 100 ml , 250 ml Four different specifications of the cylinder (see annex). In order to improve the accuracy of testing, please be measured based on the weight of powder ( m ) And bulk density (ρ) Select the appropriate cylinder.
Cylinder volume ( cm3 )
Powder Weight (g)
Bulk density ( g / cm3 )
m ≤ 10.0
10.0≤ m ≤20.0
20.0≤ m ≤50.0
50.0≤ m ≤100.0
10.0≤ m ≤20.0
20.0≤ m ≤50.0
50.0≤ m ≤100.0
m ≤ 100.0
m ≥ 100.0
m ≥ 100.0
NOTE: To improve the measurement accuracy, choose a small cylinder volume. .
Note: Specific parameters, please keep in touch with us, as well as related products.
Test Procedure samples
1. Clean the cylinder; 2. the dried sample; 3. Weighing and enter the sample weight; 4. All samples loaded into the cylinder;
5. Complete vibration; 6 reads and input volume; 7. Press 'Calculate' button to complete the calculation; 8. Print Results
There Related Products: FT-100B practical tap densitometer; FZS4-4 Cheap tap density tester; FT-100A Microcomputer Powder Density Tester, FT-104B angle of repose tester
Ricoeur Instrument Products: heap densitometer, bulk density meter, a tap density gauge, Scott capacity meter, Hall flow meter, bulk density meter, aluminum powder bulk density meter, analyzer angle of repose, repose corner, tap density tester, powder flowability tester, apparent density analyzer, aluminum fluoride (Alumina) Mobility analyzer, harness tester, conduction test machine, the voltage drop tester, DC low Resistance Tester
FT-100B Practical Tap densitometer, Heap densitometer
FT-100B Practical Tap density tester Is based on GB T 5162-2006 / ISO3953 /: 1993 (Determination of metal powder tap density), and with reference to the United States Pharmacopoeia independent research and manufacture of the powder density test instruments, widely used in chemical, petroleum, pharmaceutical, battery manufacturing, high. molecular materials, powder metallurgy, powder powder, plastics, construction materials, and other related industries, production enterprises, research institutes and universities to provide the most complete product testing solutions. instrument covers the national standard GB / T 5162-2006 / ISO3953 : 1993 in various indicators in line with USP (United States Pharmacopoeia), BP (British Pharmacopoeia) and EP (European Pharmacopoeia) Specification requirements.
Ricoeur (Albert) instrument since its inception, after years of development, adhere to the interdisciplinary, cross-industry diversification, product technology high-end line of business, and always pay attention to the introduction and training of personnel, we are committed to domestic and international market development improve technological innovation and service quality, and maintain good relationships with many loyal customers in various industries, product quality acclaimed. RICO Ricoeur 'with the majority of customers were the progress of development.
1.1 FT-100B Practical Tap density tester By a variable speed motor, vibration components, and other components. And the instrument with a compact, solid, simple operation. Basic Features
u Accuracy: Automatic reservations 5 Significant digits after the decimal point may be accurate to 4 Bit.
1.2 Environmental requirements
u power supply: communicate with 200V ± 10% 50Hz , 35W .
u Relative humidity: Less than 85%, no condensation.
u Other requirements: Environmental clean no smoke, no mechanical vibration source or around sources of electromagnetic interference.
FT-100B Practical Tap density tester Technical Specifications: