| Whether to provide custom processing: Yes|| Type: FT-102 Hall flow meter flow and bulk density measuring device|
| Accuracy: Accuracy 0.05g.|| Scope: FT-102 Hall flow meter is based on the national standard GB 1482-84 design and production of this device is suitable for the determination of metal powder flowability using a standard funnel Where can freely flow through the aperture of 2.5mm standard. funnel|
FT-102 Hall flow meter
FT-102 Hall flow meter is based on national standards GB 1482-84 The provisions of the design and production. The device is suitable metal powder flowability measurement standard funnel in. Where can freely flow through the aperture to 2.5mm Standard funnel powder, can use this device.
1, the principle
Metal powder flowability to 50g Time metal powder to flow through a standard funnel predetermined aperture required to represent.
2, the instrument structure
2.1 funnel ( Hole diameter 2.5mm)
Funnel made of stainless steel, and has a sufficient thickness and hardness to prevent deformation and excessive wear.
2.2 Bracket, base and receiver
Bracket for fixing the funnel. Base for mounting bracket and receiver, adjust the level, stable and vibration free. Stand height adjustment and fixed with the supplied wrench, funnel attached to the bracket. Receiver (Stainless steel plate) is placed in the base on to collect powder.
2.3 Balance (user-supplied)
Maximum weighing 100g ; Accuracy 0.05g .
Measurement time can be accurate to 0.01s .
The device is equipped with a volume of 25ml The stainless steel measuring cup. Users can refer GB GB 1479-84 The provisions of the completion of the metal powder density determination (funnel) loose.
3, the basic configuration
Models and Specifications
The number of
FT - 102
Stainless steel (Φ 2.5mm , Φ5.0mm)
each 1 only
Stainless steel (Φ 31mm , 25ml )
ZSD-809 ( Electronic stopwatch)
4mm inner hexagon