Ricoeur Albert Instrument alumina supply flow measuring device, aluminum fluoride flow time tester, powder flowability measurements

Ricoeur Albert Instrument alumina supply flow measuring device, aluminum fluoride flow time tester, powder flowability measurements
 

Product description:

Brand: Ricoeur Albert Instrument Model: 104c
  • Types of: other
Detailed description:
Repeatability error: 1 Samples can be measured state: alumina fluidity measuring device, aluminum fluoride flow time tester, powder flowability measurements
Custom processing: Measuring range: alumina flowability measuring apparatus, the flow time tester aluminum fluoride powder fluidity measurement
Type: Density Tester Scope: alumina fluidity measuring device, aluminum fluoride flow time tester, powder flowability measurements
Dimensions: 1 (mm) Repeatability error:
Samples can be measured state: Custom processing:
Measuring range: Types of:
Scope: Dimensions:

FT-104C aluminum fluoride, aluminum mobility analyzer flow tester Aluminum fluoride and alumina flow time analyzer

FT-104C aluminum fluoride (Alumina) Mobility analyzer standard requirements:

According to GB 6609.36-2009-T alumina chemical analysis methods and determination of physical performance - Part 36: Determination of the flow of time;

FT-104C aluminum fluoride (Alumina) Mobility analyzer While meeting the S / T 581.17-2010 Methods for chemical analysis of aluminum fluoride and determination of physical performance - Part 17: Determination of flow This standard specifies the aluminum fluoride fluidity measurement method, that a certain quality of aluminum fluoride through a special funnel, funnel flow time measurement sample all needed.

FT-104C aluminum fluoride (Alumina) Technical parameters mobility analyzer : Funnel: stainless steel outer diameter of the funnel catchy 138.5mm, an inner diameter of 123mm, outlet diameter is 3.95mm ~ 4.0mm, the total height of 190.5mm wear resistant stainless steel catchy taper:. 60 °, 15 ° taper at the discharge port basis. GB / T66.9.36-2008 for determination of physical performance of alumina Design (flow properties)

Ambient temperature: 15 ~ 25 ℃ Relative humidity: not more than 70%.
Lighting: in line with the operating microscope to light conditions require laboratory in a natural airflow and vibration conditions.
Placed in a fume hood smooth, do not open fan. With laboratory no dust, corrosive, volatile items

Ricoeur Instruments related products Recommended: FT-104A alumina / aluminum fluoride analyzer angle of repose; FT-104C aluminum fluoride (Alumina) Fluidity tester; FT-104 alumina bulk density tester

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder tester series

FT-100A tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester













FT-104C aluminum fluoride, aluminum mobility analyzer flow tester Aluminum fluoride and alumina flow time analyzer

FT-104C aluminum fluoride (Alumina) Mobility analyzer standard requirements:

According to GB 6609.36-2009-T alumina chemical analysis methods and determination of physical performance - Part 36: Determination of the flow of time;

FT-104C aluminum fluoride (Alumina) Mobility analyzer While meeting the S / T 581.17-2010 Methods for chemical analysis of aluminum fluoride and determination of physical performance - Part 17: Determination of flow This standard specifies the aluminum fluoride fluidity measurement method, that a certain quality of aluminum fluoride through a special funnel, funnel flow time measurement sample all needed.

FT-104C aluminum fluoride (Alumina) Technical parameters mobility analyzer : Funnel: stainless steel outer diameter of the funnel catchy 138.5mm, an inner diameter of 123mm, outlet diameter is 3.95mm ~ 4.0mm, the total height of 190.5mm wear resistant stainless steel catchy taper:. 60 °, 15 ° taper at the discharge port basis. GB / T66.9.36-2008 for determination of physical performance of alumina Design (flow properties)

Ambient temperature: 15 ~ 25 ℃ Relative humidity: not more than 70%.
Lighting: in line with the operating microscope to light conditions require laboratory in a natural airflow and vibration conditions.
Placed in a fume hood smooth, do not open fan. With laboratory no dust, corrosive, volatile items

Ricoeur Instruments related products Recommended: FT-104A alumina / aluminum fluoride analyzer angle of repose; FT-104C aluminum fluoride (Alumina) Fluidity tester; FT-104 alumina bulk density tester

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder tester series

FT-100A tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester