DS -881 passenger vehicles and other windshield adhesive for plastic

DS -881 passenger vehicles and other windshield adhesive for plastic
 

Product description:


DS -881 passenger vehicles and other windshield adhesive for plastic
Product Features
• High strength; high flexibility; excellent adhesion and cohesion; the adhesive / sealant flexibility; durable;
• Single component; wet cured; thixotropic excellent; facade coating is not flowing; facilitate construction;
• solvent-free; be glued to the substrate without corrosion; pollution; environmental pollution;
• Good sealing, puncture resistance, water resistance, oil resistance, resistance to aging.
Product Usage
Mainly used for bonding the windshield and side windows and between the main buses, special vehicles, railway passenger cars, ships and other; body skin, Lvkou bonding; adhesive decorative pieces inside and outside the vehicle.
Technical data
project
Performance
project
Performance
project
Performance
Exterior
Black paste
Volatile
≤4%
Shear strength
≥2.5MPa
density
1.30 ± 0.05 g / cm3
hardness
55±5 Ao
Construction of the temperature
+5~+35℃
Dry time
20 ~ 60 min
Tensile Strength
≥6.0MPa
Shelf Life
9 months
Curing speed
3 ~ 5mm / d
Elongation at break
≥400 %
package
310ml aluminum cylinder, 20 / box; 300ml flexible sausage, 20 / box; 400ml flexible sausage, 20 / box; 600ml flexible sausage, 20 / box; 240kg / barrel vats packing; can also be customized packaging requirements.
Storage and transportation
• Transport: Moisture, rain, sun, high temperature, away from heat, handle with care, prohibit squeeze collisions.
• Storage: Sealing and storage is at a low temperature; dry place; recommends storage at a temperature of 5 ~ 25 ℃; humidity ≤50% RH environment; prohibit stored at a temperature higher than 30 ℃ or the humidity is greater than 80% RH,
Environment.
Shelf Life
In the original packaging container, shelf life is not less than nine months, nine months later, passed the test can still be used.
Construction Technology
See related construction process different depending on the application site.
Recommendations
• It is recommended for use with the primer; for less demanding situations, being sticky substrate can be used directly by the activator after treatment;
• Selection of the product and the end of plastic; activation agent ancillary products to treat sticky substrate adhesion test must first be carried out prior to bonding; to ensure that they have good compatibility; while in use should
It should ensure that the main glue, end of plastic, activators belong qualified products shelf life.
• construction in strict accordance with the construction process, any action in violation of the construction process may cause bonding failure;
• This product is fully cured non-toxic, but before curing should avoid contact with the eyes, skin, and if skin contact with the eyes, first with soap and water or alcohol scrub, then rinse with water.
If the situation is serious, they should immediately seek medical treatment.