DS -66 single-component polyurethane waterproof coating

DS -66 single-component polyurethane waterproof coating
 

Product description:


DS -66 single-component polyurethane waterproof coating
Product Details
Product Features
• Convenient: single component, no mixing prior to use; use a surplus after the sealed package may continue to be used;
• Shengliao: After curing volume micro-expansion, namely the cured film slightly thicker than when sizing;
• Environmental: pure polyurethane products; solvent free; green; excluding bitumen; tar; tasteless after curing; no corrosion of the substrate to be glued; environmental pollution;
• Efficient: high coating strength, flexibility, abrasion resistance, puncture resistant, acid and alkali, mildew, and concrete, tile, marble, polyester and other substrate bonding is strong, durable and long service life.
Product Usage
• basement, kitchen, bathroom, under the tunnel, deep in waterproof and general home improvement.
• reservoirs, water towers, swimming pools, baths, fountains, pools, reservoirs, sewage treatment pond seepage leakproof, irrigation and drainage channels.
• ordinary roof, interior and exterior seepage leakproof, pedestrian bridges seepage leakproof slip.
• leak-proof water tank seepage underneath the pipe corrosion.
• various types of floor tiles, marble, asbestos board moisture, bonding.
Technical data
project
Performance
project
Performance
project
Performance
Exterior
Customer requirements, even viscous
Solid content
≥80
Sag
Self-leveling
density
1.35 ± 0.1 g / cm3
hardness
/
Construction of the temperature
+5~+35℃
Dry time
≤4hour
Tensile Strength
≥2.45MPa
Shelf Life
9 months
Curing speed
3 ~ 5mm / d
Elongation at break
≥600 %
package
5Kg / barrel, 20Kg / barrel.
Storage and transportation
• Transport: Moisture, rain, sun, high temperature, away from heat, handle with care, prohibit squeeze collisions.
• Storage: Sealing and storage is at a low temperature; dry place; recommends storage at a temperature of 5 ~ 25 ℃; humidity ≤50% RH environment; prohibit stored at a temperature higher than 30 ℃ or the humidity is greater than 80% RH,
Environment.
Shelf Life
In the original packaging container, shelf life is not less than nine months, nine months later, passed the test can still be used.
Construction Technology
See related construction process different depending on the application site.
Recommendations
• With the construction of the product must test the construction, while the paint before use to ensure that the case should be qualified product shelf life.
• construction in strict accordance with the construction process, any action in violation of the construction process may cause bonding failure;
• This product is fully cured non-toxic, but before curing should avoid contact with the eyes, skin, and if skin contact with the eyes, first with soap and water or alcohol scrub, then rinse with water.
If the situation is serious, they should immediately seek medical treatment.