DS -260 low modulus construction sealant

DS -260 low modulus construction sealant
 

Product description:


DS -260 low modulus construction sealant
Product Details
Product Features
• Low modulus; flexible durable; excellent sealing and water resistance;
• Single component; simple construction; solvent free; after curing non-toxic and tasteless; green;
• compatibility of old glue, easy repair;
• Wet curing; does not crack; volume does not shrink after cure;
• wear; puncture; water; oil; anti-aging; mildew;
• Extrusion excellent, easy to scrape seam operation;
• variety of substrates with good adhesion, the substrate and non-corrosive, non-polluting.
Product Usage
• mainly used for house building, plazas, roads, airport runways, anti-wall, bridges and tunnels, building doors and windows of expansion joints, settlement and other joints sealed.
Various • walls, floor throughout the body cavity seal.
• stone facades and aluminum buckle, Epoxy Floor, cement wall panels, panels color steel roofing seams sealed.
• drains, reservoirs, sewage pipes, tanks and silos and other joints waterproof seal.
Technical data
project
Performance
project
Performance
project
Performance
Exterior
Black / white / gray paste
Volatile
≤4%
Shear strength
/
density
1.35 ± 0.05 g / cm3
hardness
30±5 Ao
Construction of the temperature
+5~+35℃
Dry time
≤180 min
Tensile modulus
≤0.4MPa
Shelf Life
9 months
Curing speed
3 ~ 5mm / d
Elongation at break
≥600 %
package
310ml aluminum cylinder, 20 / box; 400ml flexible sausage, 20 / box; 600ml flexible sausage, 20 / box.
Storage and transportation
• Transport: Moisture, rain, sun, high temperature, away from heat, handle with care, prohibit squeeze collisions.
• Storage: Sealing and storage is at a low temperature; dry place; recommends storage at a temperature of 5 ~ 25 ℃; humidity ≤50% RH environment; ban
Stopper stored at a temperature higher than 30 ℃ or humidity is greater than 80% RH environment.
Shelf Life
In the original packaging container, shelf life is not less than nine months, nine months later, passed the test can still be used.
Construction Technology
See related construction process different depending on the application site.
Recommendations
• Selection of the product and the end of plastic; activation agent ancillary products to treat sticky substrate adhesion test must first be carried out prior to bonding; to ensure
They have good compatibility, while before use to ensure that the main glue, end of plastic, activators belong to the shelf life of qualified products.
• construction in strict accordance with the construction process, any action in violation of the construction process may cause bonding failure;
• This product is fully cured non-toxic; but before curing should avoid contact with the eyes; skin contact; if the eye; skin contact; first with
Soapy water or alcohol scrub, then rinse with water. If the situation is serious, they should immediately seek medical treatment.