DS -88 steel structure for plastic

DS -88 steel structure for plastic
 

Product description:

DS -88 steel structure for plastic
Product Details
Product Features
• High modulus; high elasticity; ultrahigh strength; strong cohesion; does not crack;
• Single component; wet cured; thixotropic excellent; facade coating is not flowing; facilitate construction;
• compatibility of old glue, easy repair;
• solvent-free; non-toxic and tasteless after curing; green;
• water; oil; Acid; do not mildew;
• puncture-resistant; anti-aging; weathering; fatigue;
• with a variety of substrates with good adhesion;
• no corrosion of the substrate, the surface can be polished, painted.
Product Usage
• steel and structure, bonding steel and concrete seal.
• asbestos roofing and other adhesive sealing materials and steel structure.
Seal • metal, ceramics, stone, glass, wood and other materials.
Technical data
project
Performance
project
Performance
project
Performance
Exterior
Black paste
Volatile
≤5%
Shear strength
≥2.0MPa
density
1.30 ± 0.05 g / cm3
hardness
55±5 Ao
Construction of the temperature
+5~+35℃
Dry time
≤60 min
Tensile Strength
≥5.0MPa
Shelf Life
9 months
Curing speed
3 ~ 5mm / d
Elongation at break
≥400 %
package
310ml aluminum cylinder, 20 / box; 300ml flexible sausage, 20 / box; 400ml flexible sausage, 20 / box; 600ml flexible sausage, 20 / box.
Storage and transportation
• Transport: Moisture, rain, sun, high temperature, away from heat, handle with care, prohibit squeeze collisions.
• Storage: Sealing and storage is at a low temperature; dry place; recommends storage at a temperature of 5 ~ 25 ℃; humidity ≤50% RH environment; prohibit stored at a temperature higher than 30 ℃ or the humidity is greater than 80% RH
Environment.
Shelf Life
In the original packaging container, shelf life is not less than nine months, nine months later, passed the test can still be used.
Construction Technology
See related construction process different depending on the application site.
Recommendations
• Selection of the product and the end of plastic; activation agent ancillary products to treat sticky substrate adhesion test must first be carried out prior to bonding; to ensure that they have good compatibility; while in use should
It should ensure that the main glue, end of plastic, activators belong qualified products shelf life.
• construction in strict accordance with the construction process, any action in violation of the construction process may cause bonding failure;
• This product is fully cured non-toxic, but before curing should avoid contact with the eyes, skin, and if skin contact with the eyes, first with soap and water or alcohol scrub, then rinse with water.
If the situation is serious, they should immediately seek medical treatment.