BS1363.1: 1995 section 9.3.1 (FIG. 2a and FIG. 2b) the mechanical strength of the elastic shell test device

BS1363.1: 1995 section 9.3.1 (FIG. 2a and FIG. 2b) the mechanical strength of the elastic shell test device
 

Product description:

Flexible mechanical strength testing device housing

BS1363 elastic plug housing mechanical strength test apparatus (BS plug socket cover test device):
Standard: Test accord BS1363.1: 1995 section 9.3.1 (Figures 2a and 2b) standards.
Scope: suitable for testing BS plug assembly and wiring, etc. in the normal use of the process, not because of excessive pressure and lead to accessible live parts to pierce the outer surface or creepage distance and clearance requirements down under.


Test methods:

The sample plug is inserted into the test apparatus wooden mounting block, with a surface area of ​​25.0 ~ 25.2mm2 and bottom chamfer is 2.0 ~ 2.5mm pressure hammered in position on a sample arbitrarily selected. Applied pressure through weight 230 ~ 240N each test, the sample of all conductive parts connected together, voltage AC2000 ± 60V / 50HZ applied between it and the ground pressure hammer, holding time 60 ~ 65S.


Determination method:

During the test, the sample shall be no flashover or breakdown with BS EN 61032:. 11 28 ~ 30N applied force in 1998 test pointers should not touch live parts.


Main configuration:
1, the biasing range: 230 ~ 240N;
2, the pressure hammer: D bottom chamfer R is 2.0 to 2.5, with an area of ​​25.0 ~ 25.2mm2;
3, according to BS1363.1-1995 configuration in Figure 2b meet the test requirements of the required size of the board hard, as a number;
4, withstand voltage tester is optional.
5, Weight: 9.8 kg