Frequency stabilization power supply

Frequency stabilization power supply
 

Product description:

Input voltage: 1 (V) Waveform distortion: 1 (%) Frequency regulation of: 1 (%)
Output voltage: 1 (V) Load regulation: 1 (%) Circuit mode: SPWM switching
Load Type: Mixed loads Custom processing: Efficiency: 1 (%)
Applications: Motor Type: Regulator power inverter Model: AF50
Output frequency: 1 (Hz) Brand: ACS Product Certification: CCC
Control mode: Pulse width modulation type Input Frequency: 1 (Hz)

The regulator frequency stabilization power supply voltage frequency components mainly for remote areas grid voltage and frequency fluctuations or generators, which led to the load device is not working properly design and development, the bad power supply can be regulated, steady frequency processing, output quality, highly reliable frequency stabilization power supply voltage, avoids the voltage and frequency fluctuations, large waveform distortion and the load equipment hazards, with mountain Jie licensing regulators frequency stabilization power supply electrical equipment is safe, reliable the best guarantee of operation.

The power and load power factor

model

AF50-13005

capacity

5KVA

Volume (D * W * H)

660 * 400 * 700 (mm)

grade

High-end industrial products

Circuit mode

IGBT / SPWM pulse width modulation mode

AC input

Phase

Simplex

Voltage

130-280V

frequency

30-80HZ

AC output

(Standard sine wave)

Phase

Phase four-wire

Line voltage

380V±0.5%

Phase current

7.6A

frequency

50HZ ± 0.01%

Frequency stability

≤ ± 0.01HZ

Voltage regulation rate

≤±0.5%

Load stability

≤±1%

Waveform distortion

THD≤ ± 3% (resistive load)

Unbalanced

Phase 120 ° ± 2 °; phase difference (3% Rating

Power Factor

0.85

effectiveness

≥85%

Reaction time

(20ms

Adapt to the load

No type restrictions, but the capacitive and inductive load shall be applicable derating

Panel Displays

Frequency, voltage, current, power / power factor.

protective device

Input no-fuse switch; Output no fuse switch; overvoltage; overcurrent; overload; automatically trip over temperature and short circuit protection and alarm

noise

(60dB

Insulation reactance

500Vdc 20MΩ or more

Voltage insulation

1800Vac / 5Ma / 1 分钟

Cooling device

Forced air cooling fan

Chassis Architecture

Three film surface quality, fine orange lines

Electromagnetic Compatibility

Referring GJB151A-97, GJB152A-97 requirements

Use of the environment

Operating temperature

-10~50℃

Relative humidity

0-90% (non-condensing)

Altitude

2000 meters

Remark

a. Power according to the modular design, ease of maintenance replacement parts.

b. Follow the on ship vibration test standards, strengthening anti-vibration, after the long-distance transport to ensure reliable performance.

c. After the parameters debugging, still keep the original settings.

d. Communication monitoring optional RS232 / 485 and other communications interfaces.

e. according to the voltage, frequency and other parameters can be specially tailored to customer requirements.