AND110 series railway single-phase inverter power

AND110 series railway single-phase inverter power
 

Product description:

Input voltage: 1 (V) Waveform distortion: 1 (%) Frequency regulation of: 1 (%)
Output voltage: 1 (V) Load regulation: 1 (%) Circuit mode: SPWM switching
Load Type: Mixed loads Custom processing: Efficiency: 1 (%)
Applications: Electronics Manufacturing Type: Single-phase inverter power supply Type: AND
Output frequency: 1 (Hz) Brand: ACS Product Certification: CCC
Control mode: Pulse width modulation type Input Frequency: 1 (Hz)

(Introduction)

Railway power inverter (110V input) for power plants, substations and high reliability requirements of the power supply to the new digital technology developed intelligent frequency inverter system adopts SPWM pulse width modulation technology, IGBT power modules and output isolation transformer, the power output of the inverter is a frequency stabilization, filter out noise, pure sine wave power interference from power fluctuations, low distortion, with a load capacity, load compatibility, DC Wide input voltage range of features, great to meet the needs of various electrical environment; perfect protection device improves system stability and reliability; human interface design, makes machines to communicate zero distance; inverter and between the PC via RS232 communication interface can be communication, allowing users to easily observed on the terminal at any time inverter working conditions, history, timely inverter control, at the same time via remote network monitoring capabilities, through the network The inverter can be remote, monitoring and management anytime, anywhere, truly unattended function, and the composition of the hot backup system to improve system reliability. In the stable above all design, AND110 series against change is undoubtedly your best choice.

(Applications)

Widely used in remote power systems, communications, carrier, monitoring, protection and emergency lighting.
(Features)

1. Using American Microchip company dedicated high-performance microprocessor control;

2. Japan's Mitsubishi 5th generation high performance IGBT power modules;

3. Pure sine wave output, output voltage regulation, frequency stabilization;

4. Adopt Japan imported high core, inverter efficiency up to 92%;

5. With AC bypass function, bypass time less than 4ms;

6. Chinese LCD multi-level menu, the display contents are: real-time parameters; state quantity; value parameter; rated power;

7. facilitate communication: RS232 / 485, SNMP card communications port truly multi-purpose communications and remote monitoring;

8. The input and output excellent EMI / EMC targets.

(Technical Parameters)

Model (AND110-)

3010

3020

3030

3050

3100

3150

3200

3300

Direct-current

enter

Rated Capacity

1KVA

2KVA

3KVA

5KVA

10KVA

15KVA

20KVA

30KVA

Rated input voltage (VDC)

110

Input voltage range (VDC)

90~150

Current (A)

9

18

27.3

45.5

91

136.4

182

273

Mains

bypass

Input voltage range (VAC)

220±15%

Enter the maximum phase current (A)

4.5

9

13.6

22.7

45.5

68.2

91

136.4

Switching time (mS)

≤4mS

communicate with

Export

Rated voltage (VAC)

220V

Rated phase current (A)

4.5

9

13.6

22.7

45.5

68.2

91

136.4

Rated frequency (Hz)

50Hz

Overload

120% 1 minute; 150% for 10 seconds; 200% 1 second

Voltage stability accuracy (VAC)

220±1%

Adapt to the load

No type restrictions; available with completely unbalanced load; but the capacitive and inductive load shall be applicable derating

Frequency stability and accuracy (Hz)

50±0.04

Waveform distortion (THD)

3% (linear load)

Dynamic response (0-100%)

≤20ms

Power factor (PF)

0.8

Inverter efficiency

92%

Crest factor (CF)

3: 1

system

Continuous running time

Continuous operation

Noise (dB1 meters)

≤50

Ambient temperature

-10~+50℃

Altitude

≤4000 meters (altitude higher than 1000 m with derating)

Communication Interface

RS232; RS485; SNMP card; dry node (optional)

The above data for the reference data, subject to change without notice.