CX-Z18 needle flame tester

CX-Z18 needle flame tester
 

Product description:

CX-Z18 needle flame tester
Basic introduction:
1, the needle flame test is IEC60695 -11-5, and other standards GB / T5169.5-2008, GB4706.1-2005 the use of small-flame ignition source simulation project.
2, the needle flame tester is a predetermined size (Φ0.9mm) needle burner pass to a specific gas (butane) to 45 ° angle orientation Shi burning timed test, depending on whether the test ignition and combustion support and the length of time to assess the internal combustion equipment due to fault conditions caused by the small flame of fire risk.
3, the needle flame test apparatus for lighting, low-voltage electrical equipment, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, electrical connectors, accessories and other electrical and electronic equipment and parts, components research, production and quality inspection departments, but also for insulation, plastic or other solid combustible materials industry.

Technical Parameters:
1, needle burner: the hole Φ 0.5mm ± 0.1mm, an outer diameter of ≤Φ 0.9mm, length ≥ 35mm, stainless steel
2, the burner angle: tilted 45 ° (the test) or vertically (adjust the flame height)
3, Shi burning time: 0-999.9s ± 0.1s adjustable (usually selected as the 30s)
4, holding burning time: 0-999.9s ± 0.1s, auto record, manual pause
5, the flame height: 12mm ± 1mm ​​(with height measuring apparatus)
6, Shi gas body: 95% butane gas (lighter gas can be bottled)
7, the temperature measuring range: 0 ~ 1000 ℃
8, the flame temperature requirements: the time to rise to 700 ℃ ± 3 ℃ from 100 ℃ ± 2 ℃ in 23.5 seconds ± 1 seconds
9, thermocouple: Φ0.5mm imported armored (K type) thermocouple
10. Test Background: Black background
11, the testing process: test procedures automatic control, independent ventilation
12, reference standard: IEC60695 -11-5, GB / T5169.5-2008, GB4706.1-2005
13, Studio Volume: 0.5 cubic meters, stainless steel chassis (can be customized according to customer requirements 0.75 cubic meters or cubic)
14. The apparatus outer dimensions: 1000mm * 1300mm wide * 650mm deep high