- Place of Origin: Hebei, China (Mainland)
- Brand Name: Wanxiang
- Model Number: Drill Bit
- Type: Hole Opener Bits
- Material: High Manganese Steel
- Use: Well Drilling
Packaging & Delivery
|Packaging Details: ||Wooden cases or as per customer's requirements. |
|Delivery Detail: ||within 7 days after receipt of payment |
Hole Opener Reamer
1. Steel tooth & TCI available
2. 6'-42 in diameter
3. Strict Quality Control System
Hole Opener Reamer for Well Drilling
Straighter Holes - By drilling a smaller hole with a pilot bit, then attaching that said bit onto the bottom of the the hole opener. The hole opener will follow the path of the hole drilled by the smaller bit.
Larger Holes with Smaller Rigs - By drilling a hole in stages, larger holes can be drilled with smaller rigs. A smaller hole requires less power.
Replacing Cutters and Cutting Cost - On most Hole Opener designs, the cutters can be easily replaced. The cost to replace a cutter is a fraction of the cost to replace a large tricone rock bit.
Cost of Large Rock Bits - Larger diameter rock bits not only cost a lot, they can be difficult to find. A more economic solution is to use a hole opener that uses smaller tricone rock bit segments..
Flexability - Hole Openers can be fabricated in just about any size, and can be configured to drill through any formation.
|Hole Size||Pilot Hole||Standard Fishing Nick O.D||Thread Type|
|7-5/8||5-5/8||5-1/2~6||4-1/2 REG||3-1/2 REG|
|8-1/2||5-5/8||5-1/2~6||4-1/2 REG||3-1/2 REG|
|10-5/8||7-5/8||8||6-5/8 REG||4-1/2 REG|
|12-1/4||8-1/2||8||6-5/8 REG||4-1/2 REG|
|14-3/4||10-5/8||8~9-1/2||6-5/8 REG||6-5/8 REG|
|17||10-5/8||8~9-1/2||6-5/8 REG||6-5/8 REG|
|17-1/2||10-5/8||8~9-1/2||6-5/8 REG||6-5/8 REG|
|20||15||8~9-1/2||6-5/8 or 7-5/8REG||7-5/8 REG|
|24||15||8~9-1/2||6-5/8 or 7-5/8REG||7-5/8 REG|
|26||15||8~9-1/2||6-5/8 or 7-5/8REG||7-5/8 REG|
|36||26||9-1/2~10-1/2||7-5/8 or 8-5/8REG||8-5/8 REG|
|42||26||9-1/2~10-1/2||7-5/8 or 8-5/8REG||8-5/8 REG|