One component crosslinking agent DT-100W
DT-100W appearance is transparent viscous liquid, is environmentally friendly water-based hydrolysis crosslinking agents suitable for use in any of the water-based systems can be used as single-component crosslinking agents, crosslinking temperature is about 150 ℃, added to the polyurethane latex and acrylic emulsion paint printing paste, adhesive, or any other system with the baking process, thereby to prepare a storage stable one-component coating, are widely used in heat curing systems, such as automotive original paint, rolled steel coatings, textile industry, electronics, such as paint spraying and electrophoresis; thereby improve the film fastness, rubbing fastness and feel and improved coating scrub, abrasion, corrosion and chemical resistance, weather resistance, etc., as long as appropriate temperature storage, add the crosslinking agent system can continue to maintain long-term stability.
Appearance: transparent viscous liquid;
Active ingredient: ≥99%;
Viscosity (25 ℃): 3500cps;
Density (25 ℃): ≈1.0Kg / L;
1, in the hard wood floor paint can improve its water resistance, alcohol, detergent-resistant, resistant to chemicals and abrasion resistance.
2, in aqueous industrial paint can improve its water resistance, alcohol, anti-adhesive.
3, in the vinyl coating can reduce plasticizer migration resistance, improved stain resistance.
4, can generally improve adhesion on non-porous substrates.
5, to improve water and detergent-resistant ink performance.
6, to improve the printing coating water resistance, adhesion and washing fastness.
7, to improve the leather coating water resistance, washing resistance, chemical resistance and high temperature of the performance.
DT-100W ionic water-based paint is not critical; either anion; cation system; can also be used in non-ionic systems; the added system is preferably between PH 6-9; adding the amount of total system an amount of 1-3%; in the case of special requirements; according to the actual requirements and increasing the added amount; post-processing temperature must be higher than 150 degrees; the higher the temperature the shorter the treatment time; usually within 30 minutes to obtain a cured either effect
DT-100W is translucent viscous liquid, water-based environmentally friendly, contains no free formaldehyde and heavy metals, non-irritating odor, non-toxic, non-flammable products, is a common chemical leak or spill onto the body rinse with water.
Packaging, shelf life
Packaging specifications for 25Kg / barrel, stored at room temperature for 12 months.
Information contained in this document is true and reliable, which is helpful for users is recommended that users conduct necessary experiments to confirm that the product is applicable.