Plug-in target type flowmeter, plug-in target type flowmeter high temperature, high temperature target type flowmeter Supply

Plug-in target type flowmeter, plug-in target type flowmeter high temperature, high temperature target type flowmeter Supply
 

Product description:

Working Pressure: 42 (MPa) Nominal Diameter: DN15-DN2100 (mm) Working temperature: 450 (℃)
Custom processing: Measuring range: 0.1-55800 (m3 / h) Type: impulse type flowmeter
Model: SBL Specifications: Plug-in target type flowmeter, plug-in target type flowmeter high temperature, high temperature target type flowmeter Supply Accuracy: 0.5
Brand: fine River Applicable medium: liquid, gas



Keywords: Plug-in target type flowmeter, plug-in target type flowmeter high temperature, high temperature target type flowmeter Supply


(Plug-in target type flowmeter principle)
Xiamen Jing Chuan SBL Series Plug-in target flowmeter, using new capacitive force sensor with high sensitivity, accuracy, no moving parts, small pressure loss. Its unique anti-vibration, dirt-resistant, high sensitivity characteristics , especially for high viscosity, dirty media, Yi Yi blocked condensate flow measurement and other difficult conditions, are widely used in gas, coke oven gas, blast furnace gas, producer gas, compressed air, heavy oil, residual oil, tar, flow measurement asphalt, sewage and other media. Plug-in structure, easy to install, maintenance-free no-clean, especially for the large pipe, square pipe, widely used in petroleum, chemical, metallurgical, power, pharmaceutical, environmental protection, food and other fields.
• For diameter range is wide: Φ10 ~ Φ2000 to more;

• for a variety of media: gas, liquid (including high viscosity liquids, slurries), steam;
• wide temperature range: -196 ° C ~ 500 ° C;
• For high / low pressure working condition: 0 ~ 42MPa;
• For low flow rates medium flow rate of the lowest measurable 0.08m / s.


(Plug-in target type flowmeter product parameters)
Product Name: Plug-in target type flowmeter
Diameter: DN15 ~ DN500mm
Nominal pressure: 0.6 ~ 42MPa
Conditions Temperature: + 500 ℃ ~ -200 ℃
Conditions Temperature: -20 ~ + 300 ℃ (need higher temperatures please contact the factory)
Accuracy: ± 0.2 ~ ± 2.5% FS
Range ratio: 1:10
Housing: Carbon steel, 304 stainless steel (or by user request consultations provided)
Power supply: Built-in 3.6VDC lithium battery (two-for-one, without signal output); external supply 24VDC (with output)
Output signal: 4 ~ 20mA two-wire system; pulse 0 ~ 1000HZ; Hart communication; RS232 / RS485 (or by user request consultations provided)
Protection class: IP65; IP67
Explosion-proof mark: intrinsically safe ExiallCT4; flameproof ExdllCT4
Meter Display: cumulative flow; instantaneous flow; temperature conditions; pressure conditions (temperature and pressure compensation type only); rod percent of full scale; fault detection
Connecting flanges: GB (GB / T) series; Chemical (HG) series; mechanical (JB / T) series; customers can also request States flange standard
Connection: pipe flange (DN15-300mm); plug-in (DN100- DN3000mm to larger).
(Plug-in target type flowmeter Features)

`Whole capacitive plug-target type flowmeter in design with no moving parts, capacitive plug-target type flowmeter structure, easy disassembly
`Capacitive plug-in target type flowmeter can choose a variety of corrosion and high temperature resistant materials (such as Hastelloy, titanium, etc.)
`Machine no dead do, fully sealed (welded form), no leakage point, can be resistant to high pressure 42MPa
`Sensor is not in contact with the measured medium, there is no wear and tear parts, the use of safe and reliable
`Situ using a dry calibration method, which uses weights hanging weight method. One-button operation can complete calibration
`Capacitive plug-in target type flowmeter with selectable low-cut, non-linear correction, selectable filter time
`Measurement accuracy, precision can reach 0.2%
`Capacitive plug-in target type flowmeter equipped with self-test procedures, failure phenomenon glance
`Repeatability, generally 0.05 to 0.08%, rapid
`Pressure loss, only the standard orifice 1/2 • P about
`According to the actual need to be replaced Baffles (target plate) and change the flow range
`Low-power battery-site display, capable of showing the value of online direct reading, the display screen can be read simultaneously instantaneous and cumulative flow rate and percentage bar graph
`Easy to install, easy to maintain
`Jamming, anti-impurity capacity particularly strong
`Variety of output forms, various parameters can be remote
`Anti-vibration and strong, within a certain range can be measured pulsatile flow
`Instrument in the design with no moving parts, plug-in structure, easy disassembly
`Can choose a variety of corrosion and high temperature resistant materials (such as Hastelloy, titanium, etc.)
`Machine no dead do, fully sealed (welded form), no leakage point, can be resistant to high pressure 42MPa
`Instrument equipped with a self-test procedures, failure phenomenon glance
`Sensor is not in contact with the measured medium, there is no wear and tear parts, the use of safe and reliable
`Situ using a dry calibration method, which uses weights hanging weight method. One-button operation can complete calibration
`With a variety of installation methods to choose from, such as selecting the online plug-in, low installation costs
`Have integrated temperature and pressure compensation, direct the output quality or standard side
`With optional low-cut, non-linear correction, selectable filter time
`Can accurately measure a variety of normal temperature, high temperature of 500 degrees -200 degrees temperature conditions of the gas and liquid flow rate

(Fine Sichuan SBL Series Plug-in target type flowmeter Typical Application)

Gas Class: gas, air, hydrogen, natural gas, nitrogen, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine and so on.

Liquid: heavy oil, paraffin, asphalt, sulfuric acid, edible oil, residual oil, acetone, diesel, mine water, detergent, soy sauce, gasoline, silicone oil.

Syrup, solvents, perfume, water, aviation kerosene, soap ketone water, glucose, vegetable oleic acid, salt, paste, inks, coolant.

Ethylene glycol, mineral oil, liquid sugar, hydrochloric acid, automotive coatings, resins, butter, vegetable oil, liquid oxygen, shampoo, toothpaste, gel.

Fuel oil, milk, bleaches, conditioners, soda, additives, cleaning agents, alkali, ammonia, bunker oil, chemical reagents, kerosene.

Glycerol, dyes, water, nitric acid, high-boiling organic solution, lard, alcohol, oil, ethylene, polypropylene, etc. A stupid.

Steam categories: superheated steam, saturated steam
(Company name) Xiamen Jing Chuan Automation Technology Co., Ltd.
(Company website) http: //www.xmjingchuan.cn/
http: //www.liuliangji360.com/
http: //www.xmjingchuan.com/
http: //www.wolunliuliangji.net
The 3rd Changle Road, Huli District (Address) Xiamen
(Phone) 0592-5630657
(7X24 hours) 15859215896 (Yu Gong)
(QQ) 443569383

(Production capacity) design production capacity of one million units per year
(Service) product from the date of the factory within 12 months from the Warranty Services, appears human damage quality problems, the company responsible for repair, replacement or return, outside the guarantee period to provide paid maintenance services for life.