IEC60065 dielectric strength test device | GB8898 Dielectric strength tester

IEC60065 dielectric strength test device | GB8898 Dielectric strength tester
 

Product description:

IEC60065 dielectric strength test device | GB8898 Dielectric strength tester

Dielectric strength test device

Basic introduction:

The dielectric strength test device complies with IEC60065, UL1310, GB8898-2011 Section 10.3.2 provision requires, shape as shown in Figure 6 requirements and design production. For audio, video and similar electronic devices during the insulation resistance and dielectric strength test, the When a thin layer of insulating material such as dielectric strength test shall be present electric strength test installations.

Bracket portion with the overall structure, the use of 304 slab material processing. In order to improve resistance to electrical insulation board and creepage properties, surface frosted polished floor the minimum distance from the edge portion of the stent) 35mm, designed to meet the present altitude of 2000 Test requirements meters below 12 KV strength.

Technical Parameters:
1, the test pin weight: 50g, 100g each one
2, the test pin diameter: 5mm (corresponding to 100g), 6.8mm (corresponding to 50g)
3, the support pin rod diameter: 5mm (corresponding to 100g), 6.8mm (corresponding to 50g)
4, reference standards: GB8898-2011, IEC60065, UL1310

Note: Users are sold separately pressure tester before using the unit.