IP1X test probe | IP2X test probe | IP3X test probe | IP4X test probe

IP1X test probe | IP2X test probe | IP3X test probe | IP4X test probe
 

Product description:

IP1X test probe | IP2X test probe | IP3X test probe | IP4X test probe

IP1 ball test probe | IEC61032 Figure 1 | Test probe A


Basic introduction:
It made the corresponding provisions of 2001 and UL, etc: According to GB / T4208-2008, IEC61032: 1997, IEC60529.

Technical Parameters:
1, the probe ball diameter: 50mm
2, the baffle diameter: 50mm
3, the baffle thickness: 4mm
4, the handle diameter: 10mm
5, handle length: 100mm
6, according to IEC61032 Figure 1 (Test probe A), GB / T4208-2008 Table 6 (first characteristic numeral 1).

IP2 test probe | IEC61032 Figure 2 | Test probe B


product description:
In line with GB4706, GB2099, GB4943, GB4208IPX2, GB3883 Figure 1, IEC61032 2 test with B, IEC950 Figure 2A, IEC60884, IEC60335, GB / T16842 test with B, UL507, EN60529 Figure 1, UL1278 Figure 8.4 and other standards. For prevent finger touch or electric shock protection test test.

Basic introduction:
Made in accordance with the corresponding provisions of GB4706.1-2005, GB2099.1-2008 and related IEC61032, UL and so on.

Technical Parameters:
1, bend refers to the diameter: 12 mm
2, curved finger length: 80mm (three total length)
3, the baffle diameter: 50mm
4, handle length: 100mm
5, the reference standard: GB4706.1-2005 8.1.1 strip, IEC61032: 1997 Figure 2


IP3X test probe | IEC61032 Figure 3 | Test probe C
Basic introduction:
It made the corresponding provisions of 2001 and UL, etc: According to GB / T4208-2008, IEC61032: 1997, IEC60529.

Technical Parameters:
1, probe length: 100mm
2, probe diameters: 2.5mm
3, the stall ball diameter: 35mm
4, the handle diameter: 10mm
5, handle length: 100mm
6, according to IEC61032 Figure 3 (Test probe C), GB / T4208-2008 Table 6 (first characteristic numeral 3).

IP4X test probe | IEC61032 Figure 3 | Test probe D

Basic introduction:
It made the corresponding provisions of 2001 and UL, etc: According to GB / T4208-2008, IEC61032: 1997, IEC60529.

Technical Parameters:
1, probe length: 100mm
2, probe diameter: 1mm
3, the stall ball diameter: 35mm
4, the handle diameter: 10mm
5, handle length: 100mm
6, according to IEC61032 Figure 4 (Test probe D), GB / T4208-2008 Table 6 (first characteristic numeral 4/5/6).