Stainless steel fiber

Stainless steel fiber
 

Product description:

Long Zhi textile wire: metal wire diameter range of textile yarns generally within 0.030mm-0.040mm, the mainly 0.035mm (68d) (78D) of the main line, wire diameter, strength, elongation, vertical degrees. , filaments degree differs from the wire for other purposes, it can not be mixed, this problem also plagued major problem in many metal fabric manufacturers: not up to standard with a metal wire made out of textile fabric must be defective, waste. and different textile equipment (water; jet; twister; rapier; circle, etc.), different textile products (composite yarn; bare woven fabrics; bare woven wool; socks cap curtain blanket) applies wire quality is not the same, you should select the machine performance and product that matches the corresponding wire. I plant development and production of textile and apparel fabrics with metal wire, stainless steel wire, textile copper wire, metal spinning line is made of high quality imported metal raw silk stretch of line again, with natural diamond drawing dies and the entire computer numerical control equipment fine stainless steel micro pull aside from product has excellent tensile strength and elongation. is a highly cost-effective alternative to imported high-tech products is . many textile and garment enterprises in wire composite yarn first product: a so-called wire refers to wire composite yarn and other yarn (cotton; polyester; nylon; wool; hemp, etc.) After twisting composite made of yarn, the main suitable for water jet looms rapier loom warp knitting machine circular knitting machines and other models. Laiwu Long Zhi metal silk factory over the years to such wire composite yarn development, products have been developed by domestic customers fully affirmed the company's current production of wire Specifications: Main specifications 0.016mm-0.25mm 14D-3600D composite yarn has JC21s / 1 + 68D wire 50D polyester DTY / 1 + 68D wire JC32s / 1 + 68D metal wire 75D polyester DTY / 1 + 68D wire JC40s / 1 + 68D wire 75D polyester DTY / 2 + 68D wire JC40s / 2 + 68D 40D wire Kam DTY / 1 + 68D wire JC60s / 2 + 68D 70D wire Kam DTY / 1 + 68D wire JC80s / 2 + 68D 70D wire Kam DTY / 2 + 68D wire Textile wire specifications: 0.030mm-0.25mm 56D-5600D copper mixed yarn: JC21s / 1 + 78D copper wire JC40s / 1 + 78D copper JC60s / 2 + 78D copper wire JC32s / 1 + 78D copper JC40s / 2 + 78D copper JC80s / 2 + 78D copper wire I plant also can be tailored to customers based on customer demand for the product to order the right products. Welcomed the inquiry will staple blended yarn woven metal woven cloth, metallic yarn fabric constituted crisscross quarantine network, to isolate the microwave and the body to be protected, the microwave energy is attenuated to a certain extent, from the to anti-electromagnetic radiation effects. metal yarn blended ratio increases, the shielding rate also increased, function better. According to overseas textile research tested, woven from 1% metal yarn made of cloth 1 800 MHz electromagnetic shielding environment was 88.86%, lower at 2 450 MHz, there are 92.33% shielding rate; while containing 3% metal yarn woven cloth at 1 800 MHz have 98.43% shielding rate, in There are at 2 450 MHz 98.49% shielding rate; As for blending 5% of metallic yarn, and its products have more than 99% of the rate of electromagnetic shielding textile wire has a unique and superior physical ability, this was the general consensus. As science and technology continues to deepen, new industries are emerging, modern science and technology development and extension of the textile wire has become a great market potential in emerging industries, as a new generation of technology products, has broad prospects for development.